<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto"><div dir="ltr"></div><div dir="ltr">Hi Chris </div><div dir="ltr"><br></div><div dir="ltr">The 1.1 MCU issue might have been known but they did a horrible job with my buddy.</div><div dir="ltr"><br></div><div dir="ltr">7 x MCU 1.1 boards </div><div dir="ltr">1 replacement inverter to fix a failed inverter turned out to be a warranty unit that wasnt fixed and of course didn’t work. </div><div dir="ltr">And again this system was designed with their approval, and the loads are exactly as he told them and web connected </div><div dir="ltr"><br></div><div dir="ltr">After months they finally coped to the issue with 1.1 and got him 2 new units with 1.2 boards after trying 1.2 boards in the older units which didn’t work probably due to other damage. </div><div dir="ltr"><br></div><div dir="ltr">They are still trying to get him to pay $1500 for the inverter failure which was under warranty, it’s been 2 months and still not resolved. </div><div dir="ltr"><br></div><div dir="ltr">Total time of the project and issues 6+ months. </div><div dir="ltr">Number of field trips 15+</div><div dir="ltr">Hours per trip 5+</div><div dir="ltr">Payment for those trips 0</div><div dir="ltr"><br></div><div dir="ltr">While it’s been good to hear all the positive reviews here, what my buddy has gone through gives me huge concern to give them my money. </div><div dir="ltr"><br></div><div dir="ltr">Jay</div><div dir="ltr"><br></div><div dir="ltr"><br></div><div dir="ltr"><br></div><div dir="ltr"><br></div><div dir="ltr"><br><blockquote type="cite">On Oct 4, 2022, at 5:05 PM, Chris Sparadeo via RE-wrenches <re-wrenches@lists.re-wrenches.org> wrote:<br><br></blockquote></div><blockquote type="cite"><div dir="ltr"><div dir="auto">Hi Jay,</div><div dir="auto"><br></div><div dir="auto">We have 50+ Sol Ark’s deployed and have just recently RMA’d our first unit for a failed grid input relay. Only failure so far and tech support was awesome throughout the process. </div><div dir="auto"><br></div><div dir="auto">I have been very impressed with the 15K unit. We have dropped some serious inductive motor loads on it with no issue. </div><div dir="auto"><br></div><div dir="auto">My understanding is that the MCU glitch with paralleled units was a known issue with the 12K, and has since been resolved. </div><div dir="auto"><br></div><div dir="auto">Kindly,</div><div dir="auto"><br></div><div dir="auto">Chris </div><div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Fri, Sep 30, 2022 at 12:10 PM Jerry Shafer via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org">re-wrenches@lists.re-wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="auto">Ray. Understand but loose connections can be any product and troubleshooting loose intermittent issues are the hardest to correct<div dir="auto">J</div><div dir="auto">Funtimes</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Fri, Sep 30, 2022, 9:03 AM Ray Walters via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org" target="_blank">re-wrenches@lists.re-wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div>
<p>One thing I can say: trouble shooting problems over the phone
has its limitations. I had a customer issue with a system we
hadn't installed that was quite vexing. Turned out to be a loose
main DC connection to the inverter. Bizarre behavior as the
connection heated up and the resistance varied.<br>
</p>
<p>Ray Walters<br>
</p>
<p>On 9/30/2022 6:57 AM, Jay via RE-wrenches wrote:<br>
</p>
<blockquote type="cite">
<div dir="ltr">Hi all and thanks for the input. </div>
<div dir="ltr"><br>
</div>
<div dir="ltr">I guess he’s just been unlucky with the problems (
firmware upgrade switching to 50hz) and possibly just some
random bad hardware. </div>
<div dir="ltr"><br>
</div>
<div dir="ltr">In regards to your thoughts of a install issue, he
has spent a lot of time with sol ark reviewing everything.
Loads, wiring, they have been monitoring all the data, photos,
video etc with everything coming up correctly installed, wired,
and loads. </div>
<div dir="ltr"><br>
</div>
<div dir="ltr">this system is an upgrade for an older XW ( 6kw
units) system which worked fine. The customer wanted better
monitoring, more kw, expansion capabilities and newer tech. </div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Weird</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><br>
<blockquote type="cite">On Sep 29, 2022, at 9:50 PM, pieter
<a href="http://offgridenterprises.org" rel="noreferrer" target="_blank">offgridenterprises.org</a> via RE-wrenches
<a href="mailto:re-wrenches@lists.re-wrenches.org" rel="noreferrer" target="_blank"><re-wrenches@lists.re-wrenches.org></a> wrote:<br>
<br>
</blockquote>
</div>
<blockquote type="cite">
<div dir="ltr">
<div>
<p class="MsoNormal">We have dozens of Solark based installs
and have had excellent results. All of our system have
multiple parallel Solark inverters and have operated with
out issues. On the rare occasion that we had commissioning
questions our experience with Solark technical support has
been outstanding, they have by far the best technical
support in the industry. Although Solark helped design the
system in question I suspect that there must be some finer
points that were not shared with Solark, a load side
wiring problem or perhaps an installation error that is
causing the repeated failures. I suggest that your friend
gets a fresh set of eyes on the system and look for that
oversite we have all made and just can’t seem to see it on
our own.<u></u><u></u></p>
<p class="MsoNormal">Pieter Huebner<u></u><u></u></p>
<p class="MsoNormal">Off Grid Enterprises<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<div style="border:none;border-top:solid #e1e1e1 1.0pt;padding:3.0pt 0in 0in 0in">
<p class="MsoNormal"><b>From:</b> RE-wrenches
<a href="mailto:re-wrenches-bounces@lists.re-wrenches.org" rel="noreferrer" target="_blank"><re-wrenches-bounces@lists.re-wrenches.org></a>
<b>On Behalf Of </b>Jerry Shafer via RE-wrenches<br>
<b>Sent:</b> Thursday, September 29, 2022 10:25 AM<br>
<b>To:</b> RE-wrenches
<a href="mailto:re-wrenches@lists.re-wrenches.org" rel="noreferrer" target="_blank"><re-wrenches@lists.re-wrenches.org></a><br>
<b>Cc:</b> Jerry Shafer <a href="mailto:jerrysgarage01@gmail.com" rel="noreferrer" target="_blank"><jerrysgarage01@gmail.com></a><br>
<b>Subject:</b> Re: [RE-wrenches] sol ark reliability
question<u></u><u></u></p>
</div>
<p class="MsoNormal"><u></u> <u></u></p>
<div>
<p class="MsoNormal">Wrenches<u></u><u></u></p>
<div>
<p class="MsoNormal">Solark issues, I have them living
off grid, 3 phase and grid tied back up, both AC and
DC coupled with only one intermittent comms issue,
does not seem to have any more issues than OB and less
than Schnieder, all are connected to Fortress 18.5's
or Blue Planet BMS interface seems hardy, <u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">Would be good to know what issues
he is having to accurately help<u></u><u></u></p>
</div>
<div>
<p class="MsoNormal">Jerry<u></u><u></u></p>
</div>
</div>
<p class="MsoNormal"><u></u> <u></u></p>
<div>
<div>
<p class="MsoNormal">On Thu, Sep 29, 2022 at 7:01 AM jay
via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org" rel="noreferrer" target="_blank">re-wrenches@lists.re-wrenches.org</a>>
wrote:<u></u><u></u></p>
</div>
<blockquote style="border:none;border-left:solid #cccccc 1.0pt;padding:0in 0in 0in 6.0pt;margin-left:4.8pt;margin-right:0in">
<p class="MsoNormal" style="margin-bottom:12.0pt">Hi
All,<br>
<br>
I’ve got a question about how many folks are having
issues with sol-ark products?<br>
<br>
the reason i ask is that i’ve got a friend, a good
competent installer ( well versed in OB, Schneider,
magnum) who’s had continuing nightmares with them.<br>
<br>
he’s got 2 systems each on is a stacked pair of 12kw
units, both offgrid.<br>
<br>
each system was designed by sol-ark, meaning the
design was approved by them for the loads/solar etc.<br>
<br>
He’s been through 7 MCU swaps. <br>
He’s been through a field call required because the
over the air firmware update caused the inverters to
go into 50hz and for some reason that isn’t fixable
via the web.<br>
He had an inverter that didn’t work correctly out of
the box. They charged him $2500 deposit for a
replacement.<br>
<br>
Then they charged him $1500 to fix the inverter he
sent back under warranty. Thats right $1500 to fix a
warranty which they agreed was a warranty issue.<br>
Hes not going to pay but this $1500 has been going on
a while. <br>
<br>
The inverter they sent to replace the broken one had a
older MCU firmware so wouldn’t stack and it took tech
support way to long to figure that out then they had
to send him a new MCU…...<br>
<br>
And the list goes on.<br>
<br>
But Im asking, is this poor guy just an anomaly or
will anyone else chime in about issues?,<br>
<br>
Because at this point I have no desire to install one
given his experiences<br>
<br>
Jay<br>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" rel="noreferrer" target="_blank">
RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one
doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">http://www.members.re-wrenches.org</a><u></u><u></u></p>
</blockquote>
</div>
</div>
<span>_______________________________________________</span><br>
<span>List sponsored by Redwood Alliance</span><br>
<span></span><br>
<span>Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer" target="_blank">http://re-wrenches.org</a></span><br>
<span></span><br>
<span>List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" rel="noreferrer" target="_blank">RE-wrenches@lists.re-wrenches.org</a></span><br>
<span></span><br>
<span>Change listserver email address & settings:</span><br>
<span><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a></span><br>
<span></span><br>
<span>There are two list archives for searching. When one
doesn't work, try the other:</span><br>
<span><a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a></span><br>
<span><a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a></span><br>
<span></span><br>
<span>List rules & etiquette:</span><br>
<span><a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a></span><br>
<span></span><br>
<span>Check out or update participant bios:</span><br>
<span><a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">http://www.members.re-wrenches.org</a></span><br>
<span></span><br>
</div>
</blockquote>
<br>
<fieldset></fieldset>
<pre>_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer" target="_blank">http://re-wrenches.org</a>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" rel="noreferrer" target="_blank">RE-wrenches@lists.re-wrenches.org</a>
Change listserver email address & settings:
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a>
There are two list archives for searching. When one doesn't work, try the other:
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a>
List rules & etiquette:
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a>
Check out or update participant bios:
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">http://www.members.re-wrenches.org</a>
</pre>
</blockquote>
</div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" rel="noreferrer" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote></div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote></div></div>-- <br><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div dir="ltr"><div>Chris Sparadeo</div><div><br></div><div><br></div><div>C_802-369-4458</div><div>H_802-728-3059</div><div></div></div></div></div></div></div>
<span>_______________________________________________</span><br><span>List sponsored by Redwood Alliance</span><br><span></span><br><span>Pay optional member dues here: http://re-wrenches.org</span><br><span></span><br><span>List Address: RE-wrenches@lists.re-wrenches.org</span><br><span></span><br><span>Change listserver email address & settings:</span><br><span>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</span><br><span></span><br><span>There are two list archives for searching. When one doesn't work, try the other:</span><br><span>https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</span><br><span>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</span><br><span></span><br><span>List rules & etiquette:</span><br><span>http://www.re-wrenches.org/etiquette.htm</span><br><span></span><br><span>Check out or update participant bios:</span><br><span>http://www.members.re-wrenches.org</span><br><span></span><br></div></blockquote></body></html>