<div><div dir="auto">Hi Matt,</div><div dir="auto"><br></div><div dir="auto">I typically like to keep battery monitors consistent with inverter manufacturers. Outback and Schneider Electric and Magnum offer good native battery monitors that, when tuned in correctly, work well with LFP.</div><div dir="auto"><br></div><div dir="auto">That being said, I have definitely used the Victron BMV 712 paired with SimpliPhi and hand full of times with great results. It’s a shunt based monitor with easy installation and Bluetooth connectivity. Accuracy is nowhere near closed loop, however if programmed correctly, it’s a helpful addition. </div><div dir="auto"><br></div><div dir="auto">I do wish that SimpliPhi would develop a plug in BMS display for their AmpliPHI series, similar to the Discover AES Link. This is where the Fortress eVault really gets it right. </div><div dir="auto"><br></div><div dir="auto">Kindly,</div><div dir="auto"><br></div><div dir="auto">Chris </div><div><br><div class="gmail_quote"></div></div></div><div><div><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Fri, Sep 2, 2022 at 2:32 PM Matt Sherald via RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org" target="_blank">re-wrenches@lists.re-wrenches.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left-width:1px;border-left-style:solid;padding-left:1ex;border-left-color:rgb(204,204,204)"><div dir="ltr"><div>Hello Friends,</div><div><br></div><div>I have an off-grid customer for whom I recently installed some SimpliPhi 3.8kW batteries.  This is an older system and it has a Trimetric battery monitor that the homeowners have used for years to keep an eye on their battery bank.</div><div><br></div><div>The SimpliPhi batteries appear to be working fine at the site, but the homeowners feel uneasy b/c the Trimetric is reporting that they are finishing each charging cycle with an amp-hour deficit.  The voltage of the SimpliPhi batteries indicate that they are getting fully charged and are doing so fairly early in the AM (solar is the primary power source).<br></div><div><br></div><div>I've spoken with SimpliPhi tech folks and their hunch is that the Trimetric is not reporting correctly.  They suggested that a Victron BMV-712 would be more accurate at tracking Percent Full etc...  <br></div><div><br></div><div>Do you folks think that the Victron is better at counting Ah in/out for Li batteries?  Or is the Trimetric adequate - do I maybe just need to adjust the settings?</div><div><br></div><div>Anyway, the implication that the Victron BMV was better at monitoring Li batteries has me curious and I will enjoy hearing what the group thinks.</div><div><br></div><div>Thanks for your time!</div><div><br></div><div>-Matt<br></div><div><br></div><div><br></div><div><div><br>-- <br><div dir="ltr" data-smartmail="gmail_signature"><div dir="ltr"><div><div><div>Matt Sherald<br></div>PIMBY Energy, LLC<br></div><div></div><div>304-704-5943<br><br></div><span><a href="http://www.getpimby.blogspot.com" target="_blank">www.getpimby.blogspot.com</a><br></span><a href="http://www.getpimby.com" target="_blank">www.getpimby.com</a><br></div><br></div></div></div></div></div>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
Pay optional member dues here: <a href="http://re-wrenches.org" rel="noreferrer" target="_blank">http://re-wrenches.org</a><br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
There are two list archives for searching. When one doesn't work, try the other:<br>
<a href="https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/" rel="noreferrer" target="_blank">https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/</a><br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">http://www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">http://www.members.re-wrenches.org</a><br>
<br>
</blockquote></div></div>
</div>-- <br><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div dir="ltr"><div>Chris Sparadeo</div><div><br></div><div><br></div><div>C_802-369-4458</div><div>H_802-728-3059</div><div></div></div></div></div></div></div>