<div dir="ltr">wondering if anyone has a simple lug solution for a problem i found my self in.<div>with out looking I used a meter socket for a REC meter that is not rated for #12 AWG wire.  it is on a 20 breaker but wire size is too small for the lugs.  Is there a simple Lug solution that will pass muster or do I need to up size wire or swap out the meter socket? </div><div> </div><div>problem with up sizing the wire is we ran 1/2 conduit so we can only go up to #10. without overfilling or replacing the conduit run.</div><div>Hoping there is experience out there that can point me to a simple solution. </div><div>Thanks</div><div><br></div><div><div><div class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr">Daniel Tittmann <div>CTO</div><div>Greenwired</div><div><a href="http://www.greenwired.com" target="_blank">www.greenwired.com</a></div><div><a href="mailto:daniel@greenwired.com" target="_blank">daniel@greenwired.com</a></div><div>707-923-2001 (office)</div><div>707-206-5088 (Cell)</div></div></div></div>
</div></div>