<html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns:m="http://schemas.microsoft.com/office/2004/12/omml" xmlns="http://www.w3.org/TR/REC-html40">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<meta name="Generator" content="Microsoft Word 15 (filtered medium)">
<style><!--
/* Font Definitions */
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman",serif;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal;
font-family:"Calibri",sans-serif;
color:#1F497D;}
span.EmailStyle18
{mso-style-type:personal-reply;
font-family:"Calibri",sans-serif;
color:#1F497D;}
.MsoChpDefault
{mso-style-type:export-only;
font-size:10.0pt;}
@page WordSection1
{size:612.0pt 792.0pt;
margin:72.0pt 72.0pt 72.0pt 72.0pt;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
</head>
<body lang="EN-CA" link="blue" vlink="purple">
<div class="WordSection1">
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D;mso-fareast-language:EN-US">Hi August,
<o:p></o:p></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D;mso-fareast-language:EN-US"><o:p> </o:p></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D;mso-fareast-language:EN-US">From my knowledge on the XW there is no means to update firmware through the SCP, nor is there a means to log into the SCP via web
browser. Perhaps you are thinking of systems that have the Combox installed which does add that functionality. That device allows for very simple and (so far) failure-free firmware upgrades. I have recently completed several remote upgrades - ie ship the customer
the pre-programmed Combox and have them connect it to Xanbus / Internet and I execute the updates remotely - takes about 15 minutes for a system with numerous devices. The inverter will power down during this upgrade so do need to plan for that. (a good time
to use the inverter bypass and run off generator directly). <o:p></o:p></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D;mso-fareast-language:EN-US"><o:p> </o:p></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D;mso-fareast-language:EN-US">The USB dongle is self-powered by Xanbus, and it does have a DC input if you were using it to program a standalone device such as the
AGS module which does not have its own power supply. It can be programmed using XW Config Pro (simpler, more foolproof) or XDT which is much more powerful and capable of causing havoc if not used correctly.
<o:p></o:p></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D;mso-fareast-language:EN-US"><o:p> </o:p></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D;mso-fareast-language:EN-US">The programming can be tricky and confusing for this type of set up. Once figured out, it does work well in this configuration.
<o:p></o:p></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D;mso-fareast-language:EN-US"><o:p> </o:p></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D;mso-fareast-language:EN-US">Kevin<o:p></o:p></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D;mso-fareast-language:EN-US"><o:p> </o:p></span></p>
<div>
<div style="border:none;border-top:solid #E1E1E1 1.0pt;padding:3.0pt 0cm 0cm 0cm">
<p class="MsoNormal"><b><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif">From:</span></b><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif"> RE-wrenches [mailto:re-wrenches-bounces@lists.re-wrenches.org]
<b>On Behalf Of </b>August Goers<br>
<b>Sent:</b> July-19-16 6:43 AM<br>
<b>To:</b> RE-wrenches <re-wrenches@lists.re-wrenches.org><br>
<b>Subject:</b> Re: [RE-wrenches] Conext XW+ always feeding critical loads subpanel from battery bank<o:p></o:p></span></p>
</div>
</div>
<p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D">Dan,</span><span lang="EN-US"><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D"> </span><span lang="EN-US"><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D">I went through what sounds like a similar situation with a XW+ recently. Ours had the Schneider charge controllers, not Outback, so I’m not sure
how the two would interface in your situation. </span><span lang="EN-US"><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D"> </span><span lang="EN-US"><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D">You should be able to update firmware through the SCP, call Schneider support for help. You basically log into the SCP via a web browser and then
download the firmware and update the XW. </span><span lang="EN-US"><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D"> </span><span lang="EN-US"><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D">Schneider tech support was confused internally about what charge/float settings to have us setup for a standard grid tied battery backup system.
The first setting they recommended was called two-stage and long story short, it allowed the battery to drain before charging it back up again. We switched the setting to three-stage and now the batteries remain topped of and ready for an unexpected power
outage.</span><span lang="EN-US"><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D"> </span><span lang="EN-US"><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D">As others have mentioned, it is the normal setup to have the protected (or critical) loads fed through the XW. However, during normal on-grid operation
this is simply an AC pass-through and it shouldn’t discharge the batteries. </span>
<span lang="EN-US"><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D"> </span><span lang="EN-US"><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D">There are other settings you’ll need to get right as well. As William said, be prepared to talk on the phone for a while with tech support and make
it really clear to them how you and the owner <i>want</i> the system to function. If it’s like most normal grid tied battery backup systems, the owner wants the batteries topped off in case of an unexpected power outage (this charging comes from the AC side
when the grid is up) and then wants to feed all the PV energy to loads and back to the grid just like a normal grid tied inverter.</span><span lang="EN-US"><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D"> </span><span lang="EN-US"><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D">Best,</span><span lang="EN-US"><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D"> </span><span lang="EN-US"><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D">August</span><span lang="EN-US"><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D">Luminalt
</span><span lang="EN-US"><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1F497D"> </span><span lang="EN-US"><o:p></o:p></span></p>
<div style="border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0cm 0cm 0cm">
<p class="MsoNormal"><b><span lang="EN-US" style="font-size:10.0pt;font-family:"Tahoma",sans-serif">From:</span></b><span lang="EN-US" style="font-size:10.0pt;font-family:"Tahoma",sans-serif"> RE-wrenches [mailto:<a href="mailto:re-wrenches-bounces@lists.re-wrenches.org">re-wrenches-bounces@lists.re-wrenches.org</a>]
<b>On Behalf Of </b>Dan Fink<br>
<b>Sent:</b> Monday, July 18, 2016 6:12 PM<br>
<b>To:</b> RE-wrenches<br>
<b>Subject:</b> Re: [RE-wrenches] Conext XW+ always feeding critical loads subpanel from battery bank</span><span lang="EN-US"><o:p></o:p></span></p>
</div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
<div>
<p class="MsoNormal"><span lang="EN-US">It has SCP.<o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"><br clear="all">
<o:p></o:p></span></p>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">Dan Fink</span><span lang="EN-US"><o:p></o:p></span></p>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">Adjunct Professor of Solar Energy Technology, Ecotech Institute</span><span lang="EN-US"><o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">IREC Certified Instructor™ for: </span><span lang="EN-US"><o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">~ PV Installation Professional</span><span lang="EN-US"><o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">~ Small Wind Installer</span><span lang="EN-US"><o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">Executive Director, Buckville Energy</span><span lang="EN-US"><o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">NABCEP Registered Continuing Education Providers™<br>
<a href="tel:970.672.4342" target="_blank"><span style="color:#1155CC">970.672.4342</span></a></span><span lang="EN-US"><o:p></o:p></span></p>
</div>
<p class="MsoNormal"><span lang="EN-US"><br>
<o:p></o:p></span></p>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
<div>
<p class="MsoNormal"><span lang="EN-US">On Mon, Jul 18, 2016 at 7:02 PM, Maverick Brown <<a href="mailto:maverick@mavericksolar.com" target="_blank">maverick@mavericksolar.com</a>> wrote:<o:p></o:p></span></p>
<div>
<div>
<p class="MsoNormal"><span lang="EN-US">Dan<o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">Does it have System Control Panel (SCP)? If not, it's a must.<o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">It's like having an Outback inverter with no Mate or a big LCD TV with no remote. <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"><br>
Thank you,<o:p></o:p></span></p>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">Maverick<o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">Maverick Brown<o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">Maverick Solar Enterprises, Inc.<o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">SunFlow Systems<o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">Office: <a href="tel:512-919-4493" target="_blank">
512-919-4493</a><o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">Cell: <a href="tel:512-460-9825" target="_blank">512-460-9825</a><o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<p class="MsoNormal"><span lang="EN-US">Sent from an iPhone. <o:p></o:p></span></p>
</div>
<div>
<div>
<div>
<p class="MsoNormal" style="margin-bottom:12.0pt"><span lang="EN-US"><br>
On Jul 18, 2016, at 7:57 PM, Dan Fink <<a href="mailto:danbob88@gmail.com" target="_blank">danbob88@gmail.com</a>> wrote:<o:p></o:p></span></p>
</div>
<blockquote style="margin-top:5.0pt;margin-bottom:5.0pt">
<div>
<div>
<p class="MsoNormal"><span lang="EN-US">Thanks you for your help. I'm a poor off-grid guy. This should be a learning experience then....the one time I visited the system around 10:AM,, both CCs were in Bulk, and no grid blackout the night before.<o:p></o:p></span></p>
<div>
<p class="MsoNormal"><span lang="EN-US">Methinks I should also borrow a programming dongle from a colleague for this one....<o:p></o:p></span></p>
</div>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"><br clear="all">
<o:p></o:p></span></p>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">Dan Fink</span><span lang="EN-US"><o:p></o:p></span></p>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">Adjunct Professor of Solar Energy Technology, Ecotech Institute</span><span lang="EN-US"><o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">IREC Certified Instructor™ for: </span><span lang="EN-US"><o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">~ PV Installation Professional</span><span lang="EN-US"><o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">~ Small Wind Installer</span><span lang="EN-US"><o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">Executive Director, Buckville Energy</span><span lang="EN-US"><o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">NABCEP Registered Continuing Education Providers™<br>
<a href="tel:970.672.4342" target="_blank"><span style="color:#1155CC">970.672.4342</span></a></span><span lang="EN-US"><o:p></o:p></span></p>
</div>
<p class="MsoNormal"><span lang="EN-US"><br>
<o:p></o:p></span></p>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
<div>
<p class="MsoNormal"><span lang="EN-US">On Mon, Jul 18, 2016 at 6:27 PM, Maverick Brown <<a href="mailto:maverick@mavericksolar.com" target="_blank">maverick@mavericksolar.com</a>> wrote:<o:p></o:p></span></p>
<div>
<div>
<p class="MsoNormal"><span lang="EN-US">Dan<o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">Barring some non-factory-default settings, they are not likely running on battery power at night. <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">When the grid is up, the inverter will go silent at night (asleep) [with --- three dashes on its LED display]. That's good. <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">During the day, the inverter will "prevent" the battery voltage from going above its sell voltage (unless some other mode is on like Grid Support or Standby, etc.) The charge controllers will attempt to Absorb & Float,
but the inverter will offload the energy by keeping the voltage at the Sell setting. I generally set Sell to the recommended Float Voltage++. I set the charge controller float to 1.0v higher and Absorb as appropriate. <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">There is a lot more to unpack here. <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">Flooded batteries will consume a good amount of power just to maintain float. <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">As a defense against sulphated plates forming, I program the inverter EQ button for a heavy Absorb / mild EQ and instruct the customer to press it (every other month opposite month from watering??)<o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">Are you getting 20-25 kWh per day in production?<o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal" style="margin-bottom:12.0pt"><span lang="EN-US">PS having the inverter always feed the critical loads panel is exactly it's intended use. <o:p></o:p></span></p>
<div>
<p class="MsoNormal"><span lang="EN-US">Thank you,<o:p></o:p></span></p>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">Maverick<o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">Maverick Brown<o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">Maverick Solar Enterprises, Inc.<o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">SunFlow Systems<o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">Office: <a href="tel:512-919-4493" target="_blank">
512-919-4493</a><o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">Cell: <a href="tel:512-460-9825" target="_blank">512-460-9825</a><o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<p class="MsoNormal"><span lang="EN-US">Sent from an iPhone. <o:p></o:p></span></p>
</div>
</div>
<div>
<div>
<div>
<p class="MsoNormal" style="margin-bottom:12.0pt"><span lang="EN-US"><br>
On Jul 18, 2016, at 6:50 PM, Dan Fink <<a href="mailto:danbob88@gmail.com" target="_blank">danbob88@gmail.com</a>> wrote:<o:p></o:p></span></p>
</div>
<blockquote style="margin-top:5.0pt;margin-bottom:5.0pt">
<div>
<div>
<p class="MsoNormal"><span lang="EN-US">Maverick; it's 6.0 kW of PV, 2 Midnite Classic 200s, Conext XW+ 5548, and 8 Crown Embassy VRSLA 6CEA390 for 390 amp-hours, 48v. Concerns me to be cycling those batteries every night when it's not supposed to happen as
per the permit package.<o:p></o:p></span></p>
<div>
<p class="MsoNormal"><span lang="EN-US">"Notes - Battery Backup: During an outage, an automatic transfer switch in the inverter opens the grid interconnect, isolating the inverter from the utility to prevent back-feeding the local power lines. The inverter
then draws from the battery bank to provide AC power to the backup sub-panel. Battery power is only used to provide power to the backup sub-panel. The Battery inverter only sells energy to the grid from the solar array when available and not from the battery
bank. The battery backup inverter is UL 1741 and IEEE 1547 compliant."<o:p></o:p></span></p>
</div>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"><br clear="all">
<o:p></o:p></span></p>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">Dan Fink</span><span lang="EN-US"><o:p></o:p></span></p>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">Adjunct Professor of Solar Energy Technology, Ecotech Institute</span><span lang="EN-US"><o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">IREC Certified Instructor™ for: </span><span lang="EN-US"><o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">~ PV Installation Professional</span><span lang="EN-US"><o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">~ Small Wind Installer</span><span lang="EN-US"><o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">Executive Director, Buckville Energy</span><span lang="EN-US"><o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">NABCEP Registered Continuing Education Providers™<br>
<a href="tel:970.672.4342" target="_blank"><span style="color:#1155CC">970.672.4342</span></a></span><span lang="EN-US"><o:p></o:p></span></p>
</div>
<p class="MsoNormal"><span lang="EN-US"><br>
<o:p></o:p></span></p>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
<div>
<p class="MsoNormal"><span lang="EN-US">On Mon, Jul 18, 2016 at 5:23 PM, Maverick Brown <<a href="mailto:maverick@mavericksolar.com" target="_blank">maverick@mavericksolar.com</a>> wrote:<o:p></o:p></span></p>
<div>
<div>
<p class="MsoNormal"><span lang="EN-US">Dan<o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">Does the inverter go silent at night? (---) on the inverter display?<o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">There are lots of settings that can influence sell amount. <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">What type and size is the battery bank? <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">What is the solar size?<br>
<br>
Thank you,<o:p></o:p></span></p>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">Maverick<o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">Cell: <a href="tel:512-460-9825" target="_blank">512-460-9825</a><o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<p class="MsoNormal"><span lang="EN-US">Sent from an iPhone. <o:p></o:p></span></p>
</div>
<div>
<div>
<div>
<p class="MsoNormal" style="margin-bottom:12.0pt"><span lang="EN-US"><br>
On Jul 18, 2016, at 5:56 PM, Dan Fink <<a href="mailto:danbob88@gmail.com" target="_blank">danbob88@gmail.com</a>> wrote:<o:p></o:p></span></p>
</div>
<blockquote style="margin-top:5.0pt;margin-bottom:5.0pt">
<div>
<div>
<p class="MsoNormal"><span lang="EN-US">Installer went out of business, all I have to troubleshoot with is an as-built 3-line that "may or may not be right." The charge controllers are a pair Midnite Classic 200s. Customer complained that system selling only
2/3 of what was predicted back to the utility; that appears to be because everything out of his critical loads subpanel is running off the battery bank all night, every night, grid or no, so it takes 1/3 of the day to get the batteries charged up again every
day and start selling to the grid.<o:p></o:p></span></p>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US">I have very little experience with the XW+ thus my question for the folks here. My plan for next week is to show up, make my own as-built 3-line, and recommission the inverter. Anyone else seen this sort of thing before?
Hard to believe that an electrician would mis-wire or not wire the bypass, I'm thinking software setting.<o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
<div>
<p class="MsoNormal"><span lang="EN-US"><br clear="all">
<o:p></o:p></span></p>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">Dan Fink</span><span lang="EN-US"><o:p></o:p></span></p>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">Adjunct Professor of Solar Energy Technology, Ecotech Institute</span><span lang="EN-US"><o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">IREC Certified Instructor™ for: </span><span lang="EN-US"><o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">~ PV Installation Professional</span><span lang="EN-US"><o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">~ Small Wind Installer</span><span lang="EN-US"><o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">Executive Director, Buckville Energy</span><span lang="EN-US"><o:p></o:p></span></p>
</div>
<div>
<p class="MsoNormal"><span lang="EN-US" style="font-size:9.5pt">NABCEP Registered Continuing Education Providers™<br>
<a href="tel:970.672.4342" target="_blank"><span style="color:#1155CC">970.672.4342</span></a></span><span lang="EN-US"><o:p></o:p></span></p>
</div>
<p class="MsoNormal"><span lang="EN-US"><br>
<o:p></o:p></span></p>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</blockquote>
</div>
</div>
<blockquote style="margin-top:5.0pt;margin-bottom:5.0pt">
<div>
<p class="MsoNormal" style="margin-bottom:12.0pt"><span lang="EN-US">_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">
RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" target="_blank">
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><o:p></o:p></span></p>
</div>
</blockquote>
</div>
<p class="MsoNormal" style="margin-bottom:12.0pt"><span lang="EN-US"><br>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">
RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" target="_blank">
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><o:p></o:p></span></p>
</div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
</div>
</blockquote>
<blockquote style="margin-top:5.0pt;margin-bottom:5.0pt">
<div>
<p class="MsoNormal" style="margin-bottom:12.0pt"><span lang="EN-US">_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">
RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" target="_blank">
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><o:p></o:p></span></p>
</div>
</blockquote>
</div>
</div>
</div>
<p class="MsoNormal" style="margin-bottom:12.0pt"><span lang="EN-US"><br>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">
RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" target="_blank">
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><o:p></o:p></span></p>
</div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
</div>
</blockquote>
<blockquote style="margin-top:5.0pt;margin-bottom:5.0pt">
<div>
<p class="MsoNormal" style="margin-bottom:12.0pt"><span lang="EN-US">_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">
RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" target="_blank">
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><o:p></o:p></span></p>
</div>
</blockquote>
</div>
</div>
</div>
<p class="MsoNormal" style="margin-bottom:12.0pt"><span lang="EN-US"><br>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" target="_blank">
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><o:p></o:p></span></p>
</div>
<p class="MsoNormal"><span lang="EN-US"> <o:p></o:p></span></p>
</div>
</div>
</body>
</html>