<p dir="ltr">I hate to say in public but l have paired up modules stacked simular to what you want to do, what l have seen is IMP slightly less but still way better then seperate so give it a try. I have done it for the same reason you are looking at.<br>
Jerry</p>
<div class="gmail_quote">On Jun 22, 2016 7:37 AM, "Daniel Tittmann" <<a href="mailto:daniel@greenwired.com">daniel@greenwired.com</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div><div data-smartmail="gmail_signature"><div>In the rough and tumble world of off grid system management for people who have been piecing together systems for years it is not uncommon for our company to come to a project and find many different types of solar modules.  In most cases these modules are working fine and producing power but often have different output profiles.   In an effort to upgrade systems and increase production I have often had the idea of building string of these different modules and feeding them into an MPPT controller. </div><div><br></div><div>Can anyone out there explain if this would be a good idea or a bad one?  </div><div><br></div><div>Let say we have </div><div>4 x 100 watt 17.5 Vmp modules </div><div>2 x 245 watt 30.5 Vmp modules</div><div><br></div><div>what would be the outcome of 2 strings of modules</div><div>both with: 2 x 100 watt + 1 x 245 watt  </div><div>would this cause issues with the MPPT controller (say OB FM60) or the modules? Obviously you need to build strings that will fit the profile of the controller and not over to the series string rating and voltage tolerance of the modules but from a production standpoint where does this land?</div><div><br></div><div>thanks for your advice</div><div>Cheers-</div><div>Daniel</div><div><br></div><div><br></div><div dir="ltr"><br></div><div dir="ltr">Daniel Tittmann <div>CTO</div><div>Greenwired</div><div><a href="http://www.greenwired.com" target="_blank">www.greenwired.com</a></div><div><a href="mailto:daniel@greenwired.com" target="_blank">daniel@greenwired.com</a></div><div><a href="tel:707-923-2001" value="+17079232001" target="_blank">707-923-2001</a> (office)</div><div><a href="tel:707-206-5088" value="+17072065088" target="_blank">707-206-5088</a> (Cell)</div></div></div></div>
</div>
<br>_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" rel="noreferrer" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br></blockquote></div>