<div dir="ltr">Here's the internals of the one we installed.<div><a href="https://www.dropbox.com/s/m0ie2tuqe7y1x9d/2016-06-15%2011.01.43.jpg?dl=0">https://www.dropbox.com/s/m0ie2tuqe7y1x9d/2016-06-15%2011.01.43.jpg?dl=0</a><br></div><div>It's a Radian, the batteries are Sony, there's a PLC in the door controlling everything, and a Vera Z-Wave controller for the programmable outlets.</div><div>The BMS is on the door, connected by the long cable you see at the bottom. It's not really long enough, which I complained about.</div><div>The transfer switch is a Generac component, very reliable unit, rated at 200A.</div><div>There is a DIN rail next to the inverter that holds all the internal wiring, metering, external connections.</div><div>One thing I would advocate, never try to make any connections with this unit powered up. It is very tight in there and the risk of touching a live terminal is high.</div><div>There is a 200A main breaker and a battery breaker, which is software controlled for powering down from the front panel. Startup requires holding in a DC breaker for the electronics for a few seconds then engaging the main battery breaker. The instructions says five seconds but I find it takes about 15.</div><div><br></div><div><br></div><div><br></div></div><div class="gmail_extra"><br><div class="gmail_quote">On Fri, Jun 17, 2016 at 9:54 PM, Gary Willett <span dir="ltr"><<a href="mailto:Gary@icarussolarservices.com" target="_blank">Gary@icarussolarservices.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
  
    
  
  <div bgcolor="#FFFFFF" text="#000000">
    <p>Enclosed is a photo of what appears to be a test/lab Sonnen
      system published in the 01/30/2016 edition of "Power Magazine.</p>
    <p>Can plainly see the 8kW Outback Radian inverter and I assume four
      12V Sonnen (Sony?) 8kWh Lithium-Ion batteries. Assume this is a
      "standard" 48V Radian inverter.<br>
    </p>
    <p><font size="-2"><a href="http://www.powermag.com/german-battery-firm-sonnen-moves-into-u-s-home-solar-storage-market/" target="_blank">http://www.powermag.com/german-battery-firm-sonnen-moves-into-u-s-home-solar-storage-market/</a></font></p>
    <p>Regards,</p>
    <p>Gary Willett</p>
    <p>Icarus Engineering LLC<br>
    </p>
    <div><img alt="" height="750" width="500"><br>
      <br>
      On 6/17/16 2:09 PM, Chris Mason wrote:<br>
    </div>
    <blockquote type="cite">
      <div dir="ltr">Yes, correct on both. The generator support is
        there, I did not use it.</div>
      <div class="gmail_extra"><br>
        <div class="gmail_quote">On Fri, Jun 17, 2016 at 3:07 PM, Carl
          Adams <span dir="ltr"><<a href="mailto:swingjunkie@gmail.com" target="_blank">swingjunkie@gmail.com</a>></span>
          wrote:<br>
          <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
            <div dir="ltr">Chris,
              <div><br>
              </div>
              <div>Nice finish on the Sonnen install.  It looks
                fabulous.  My understanding is the Eco 2-8 integrate the
                4kW radian, and the 10-16 incorporates the 8kW radian. 
                I assume generator support is fully supported</div>
            </div>
            <div>
              <div>
                <div class="gmail_extra"><br>
                  <div class="gmail_quote">On Fri, Jun 17, 2016 at 8:35
                    AM, Chris Mason <span dir="ltr"><<a href="mailto:cometenergysystems@gmail.com" target="_blank"></a><a href="mailto:cometenergysystems@gmail.com" target="_blank">cometenergysystems@gmail.com</a>></span>
                    wrote:<br>
                    <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
                      <div dir="ltr">I promised a picture of the Sonnen
                        installation. As these units are getting close
                        to being appliances in the same vein as home
                        audio, we wanted to have a clean finish so we
                        made some mill work to complete the top of the
                        unit to the ceiling and hide the ugly conduits.
                        <div><a href="https://www.dropbox.com/s/vlh0uumlgf5549g/2016-06-15%2011.00.44-1.jpg?dl=0" target="_blank">https://www.dropbox.com/s/vlh0uumlgf5549g/2016-06-15%2011.00.44-1.jpg?dl=0</a><br>
                        </div>
                      </div>
                      <div class="gmail_extra">
                        <div>
                          <div><br>
                          </div>
                        </div>
                      </div>
                    </blockquote>
                  </div>
                </div>
              </div>
            </div>
          </blockquote>
        </div>
      </div>
    </blockquote>
    <br>
  </div>

<br>_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" rel="noreferrer" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br></blockquote></div><br><br clear="all"><div><br></div>-- <br><div class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr">Chris Mason<div><div style="color:rgb(136,136,136)"><span style="font-size:13px">NABCEP Certified Solar PV Installer™</span></div><div style="color:rgb(136,136,136)"><span style="color:rgb(34,34,34)">Solar Design Engineer</span></div><div style="color:rgb(136,136,136)"><span style="font-size:13px">Generac Generators Industrial technician</span></div></div><div style="color:rgb(136,136,136)"><span style="font-size:13px"><br></span></div><div><a href="http://www.cometenergysystems.com" target="_blank">www.cometsolar.com</a></div><div>264.235.5670</div><div>869.662.5670</div><div>Skype: netconcepts</div></div></div>
</div>