<p dir="ltr">Brian,<br>
 Thanks, it came through perfectly! Am I correct to assume that the SE inverter will only respond to a PRI Port input signal to ramp output up and down and not a frequency shift? I'll have to check if there is someway to use that function with the XW. When I spoke with SolarEdge support, they said they are not supporting this function anymore. Do you know if that means SE won't supply technical support or that their inverters don't have that capability any more?</p>
<p dir="ltr">Howie Michaelson<br>
NABCEP Certified Solar PV Installer™</p>
<p dir="ltr">Sun Catcher<br>
Renewable Energy Systems Sales and Service<br>
VT Solar Electric Incentive Partner<br>
802-272-0004</p>
<p dir="ltr">> Hi Howie,<br>
><br>
>  <br>
><br>
> I don’t know if pdf attachments will show up on this list, but I am attaching the OutBack tech note on AC-Coupling with SolarEdge<br>
><br>
>  <br>
><br>
> If the attachment doesn’t go through, email me off-list.<br>
><br>
>  <br>
><br>
> Brian<br>
><br>
> AEE Solar<br>
><br>
> <a href="mailto:bteitelbaum@aeesolar.com">bteitelbaum@aeesolar.com</a><br>
><br>
>  <br>
><br>
>  <br>
><br>
> From: RE-wrenches [mailto:<a href="mailto:re-wrenches-bounces@lists.re-wrenches.org">re-wrenches-bounces@lists.re-wrenches.org</a>] On Behalf Of Howie Michaelson<br>
> Sent: Monday, June 06, 2016 8:56 AM<br>
> To: RE-wrenches<br>
> Subject: [RE-wrenches] AC coupling with SolarEdge<br>
><br>
>  <br>
><br>
> Hi all,<br>
> Apparently SolarEdge is no longer officially supporting or warranting AC Coupling - maybe because they now have the StorEdge option (has anyone actually seen one for sale and/or operating). In any case, since I have sold prior to missing that memo and am now in the position of installing a battery backup system using an SE5000US and a Schneider XW5548, I am needing to figure the details out without any support from either Schneider or SolarEdge (SolarEdge tech support referred me to Outback tech support saying Outback has recommendations for AC coupling with SE, but the techs I spoke with at Outback are vague at best when talking about AC coupling with any inverter and even less forthcoming when talking about SE).<br>
><br>
> Does anyone know whether SE inverters still respond to frequency shift and what those parameters are? I will install a failsafe relay to disconnect the SE inverter upon high battery voltage, but it would be useful to know what, if at all, the set points for power limiting are in the SE inverter. Any info or leads would be appreciated.<br>
> Thanks,<br>
> Howie<br>
><br>
> Howie Michaelson<br>
> NABCEP Certified Solar PV Installer™<br>
><br>
> Sun Catcher<br>
> Renewable Energy Systems Sales and Service<br>
> VT Solar Electric Incentive Partner<br>
> 802-272-0004<br>
><br>
><br>
> _______________________________________________<br>
> List sponsored by Redwood Alliance<br>
><br>
> List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
><br>
> Change listserver email address & settings:<br>
> <a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
><br>
> List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
><br>
> List rules & etiquette:<br>
> <a href="http://www.re-wrenches.org/etiquette.htm">www.re-wrenches.org/etiquette.htm</a><br>
><br>
> Check out or update participant bios:<br>
> <a href="http://www.members.re-wrenches.org">www.members.re-wrenches.org</a><br>
><br>
><br>
</p>