<html>
  <head>
    <meta content="text/html; charset=windows-1252"
      http-equiv="Content-Type">
  </head>
  <body bgcolor="#FFFFFF" text="#000000">
    The EZ out is for unscrewing a threaded connection,  I've spent a
    bunch of time with those only to have the EZ out break off in there
    too.  Then you've got a real mess of hardened tool steel.<br>
    <br>
    I would first drill several small 1/8" holes in the lead around the
    circumference of the bolt.  Then, I think tapping or pressing it out
    is the way.   The wheel puller would probably work.  You'll end up
    with an enlarged hole that you can either use a bigger bolt, or
    washers to deal with.   <br>
    <br>
    I agree some of the hardware that comes with cheaper L 16s, is
    inferior.  I've had plenty of those square heads come off with
    minimal torque.<br>
    <pre class="moz-signature" cols="72">R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer, 
Licensed Master Electrician
Solar Design Engineer
303 505-8760</pre>
    <div class="moz-cite-prefix">On 1/20/2016 3:04 PM, Roy Rakobitsch
      wrote:<br>
    </div>
    <blockquote
cite="mid:CAL2u1ueSPZ5GzNWqWusJY+ea1qYpavO9NSBFPZwW1GcCzfFEXw@mail.gmail.com"
      type="cite">
      <p dir="ltr">Yup, id pre-drill and use an ez-out, or use a flaring
        tool as a small press and drive it out. </p>
      <p dir="ltr">RoyR</p>
      <div class="gmail_quote">On Jan 20, 2016 3:54 PM, "Kristopher
        Schmid" <<a moz-do-not-send="true"
          href="mailto:solman@legacysolar.com">solman@legacysolar.com</a>>
        wrote:<br type="attribution">
        <blockquote class="gmail_quote" style="margin:0 0 0
          .8ex;border-left:1px #ccc solid;padding-left:1ex">
          <p dir="ltr">Greetings,</p>
          <p dir="ltr">Do any of you battery gurus have a suggestion for
            a method of removing a bolt remnant that is corroded into a
            flag terminal.  Both sides snapped off flush with the flag. 
            I was thinking try to drill it out or maybe a small gear
            pulling tool?  I will never again use the non stainless
            hardware supplied by the manufacturer...</p>
          <p dir="ltr">Picture attached for reference.</p>
          <p dir="ltr">Thanks!</p>
          <br>
          _______________________________________________<br>
          List sponsored by Redwood Alliance<br>
          <br>
          List Address: <a moz-do-not-send="true"
            href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
          <br>
          Change listserver email address & settings:<br>
          <a moz-do-not-send="true"
href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org"
            rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
          <br>
          List-Archive: <a moz-do-not-send="true"
href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html"
            rel="noreferrer" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
          <br>
          List rules & etiquette:<br>
          <a moz-do-not-send="true"
            href="http://www.re-wrenches.org/etiquette.htm"
            rel="noreferrer" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
          <br>
          Check out or update participant bios:<br>
          <a moz-do-not-send="true"
            href="http://www.members.re-wrenches.org" rel="noreferrer"
            target="_blank">www.members.re-wrenches.org</a><br>
          <br>
          <br>
        </blockquote>
      </div>
      <br>
      <fieldset class="mimeAttachmentHeader"></fieldset>
      <br>
      <pre wrap="">_______________________________________________
List sponsored by Redwood Alliance

List Address: <a class="moz-txt-link-abbreviated" href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a>

Change listserver email address & settings:
<a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a>

List-Archive: <a class="moz-txt-link-freetext" href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a>

List rules & etiquette:
<a class="moz-txt-link-abbreviated" href="http://www.re-wrenches.org/etiquette.htm">www.re-wrenches.org/etiquette.htm</a>

Check out or update participant bios:
<a class="moz-txt-link-abbreviated" href="http://www.members.re-wrenches.org">www.members.re-wrenches.org</a>

</pre>
    </blockquote>
    <br>
  </body>
</html>