<html>
<body>
What method do you use to repair the shingles?<br><br>
Thanks,<br><br>
Drake <br><br>
At 09:59 AM 1/8/2016, you wrote:<br>
<blockquote type=cite class=cite cite="">We use similar anchors.<br>
<a href="http://solutions.3m.com/wps/portal/3M/en_US/3M-PPE-Safety-Solutions/Personal-Protective-Equipment/Products/Product-Catalog/~/3M-Reusable-Roof-Anchorage-Device-4000-1-ea-case?N=5158341+8702288+3294529207+4294886062&rt=rud">
http://solutions.3m.com/wps/portal/3M/en_US/3M-PPE-Safety-Solutions/Personal-Protective-Equipment/Products/Product-Catalog/~/3M-Reusable-Roof-Anchorage-Device-4000-1-ea-case?N=5158341+8702288+3294529207+4294886062&rt=rud</a>
<br><br>
Most shingle roofs we come across have a ridge cap, so we cannot put it
over the ridge. <br>
We used to use RS-10 permanent anchors. They are fairly easy to install,
but we often have arrays going near the peak of the roof, so once modules
go on, the anchor gets covered up. <br>
We just install the 3M ones on the opposite side of the roof, and then
patch the shingles when we are done.<br><br>
On a related note, does anyone have a good product to use on a
trapezoidal (agricultural) metal roof?<br>
Currently we tie ropes to large trees and/or structural members on the
opposite side of the roof.<br><br>
Cheers,<br>
Dave<br><br>
<br>
<font face="arial"><b>--<br><br>
Dave Tedeyan</font><br>
Project Engineer<br>
</b><br>
<b>Taitem Engineering, PC<br>
</b>109 S. Albany Street, Ithaca, NY 14850<br>
Voice: <a href="??">(607) 277-1118 x121</a><br>
<a href="http://www.taitem.com/">www.taitem.com</a><br>
<br>
On Thu, Jan 7, 2016 at 10:53 AM, Will White
<<a href="mailto:William.White@rgsenergy.com">
William.White@rgsenergy.com</a>> wrote:<br>

<dl><br>

<dd>We use the RA-35 on the link you had below.  They work really
well because they only take a few screws.<br><br>

<dd> <br><br>

<dd>From:</b> RE-wrenches
[<a href="mailto:re-wrenches-bounces@lists.re-wrenches.org" eudora="autourl">
mailto:re-wrenches-bounces@lists.re-wrenches.org</a>] On Behalf Of
</b>Benn Kilburn<br>

<dd>Sent:</b> Wednesday, January 06, 2016 4:20 PM<br>

<dd>To:</b> RE-wrenches
<<a href="mailto:re-wrenches@lists.re-wrenches.org">
re-wrenches@lists.re-wrenches.org</a>><br>

<dd>Subject:</b> [RE-wrenches] Temporary Roof Anchors<br><br>

<dd> <br><br>

<dd>Wrenches,<br><br>

<dd>Of our residential installs, i would guess that at least 80% are done
on composite asphalt shingle roofs typically ranging from 13 to 33deg
pitch. The rest are made up of various metal roofs, cedar shake, rubber
shingles, concrete tile, etc...<br><br>

<dd>Obviously, we require roof anchors for fall protection.  Rarely
do we come across existing homes that have roof anchors already
installed.<br><br>

<dd>I have typically been using these...<br>

<dd>
<a href="https://www.acklandsgrainger.com/AGIPortalWeb/WebSource/ProductDisplay/globalProductDetailDisplay.do?item_code=DBIAJ730A">
hinged roof anchor </a><br><br>

<dd>or these...<br>

<dd>
<a href="https://www.millerfallprotection.com/fall-protection-products/roofing-products/temporary-roof-anchors">
RA15-1/ </a><br><br>

<dd>Preferably the RA15-1 since it can use screws (#12's) instead of
nails and only needs 8 screws compared to the 20 nails for the hinged
anchor... ***in order for it to be approved***<br><br>

<dd> <br><br>

<dd>​What are you all using as temporary anchors specifically for
asphalt shingle roofs​???<br><br>

<dd>Do any of you prefer to install permanent roof anchors, now that you
have just installed a "serviceable" piece of equipment on the
roof?  What do you use?<br><br>

<dd>Benn<br><br>

<dd> <br><br>

<dd>_______________________________________________<br>

<dd>List sponsored by Redwood Alliance<br><br>

<dd>List Address:
<a href="mailto:RE-wrenches@lists.re-wrenches.org">
RE-wrenches@lists.re-wrenches.org</a><br><br>

<dd>Change listserver email address & settings:<br>

<dd>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a>
<br><br>

<dd>List-Archive:
<a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html">
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a>
<br><br>

<dd>List rules & etiquette:<br>

<dd><a href="http://www.re-wrenches.org/etiquette.htm">
www.re-wrenches.org/etiquette.htm</a><br><br>

<dd>Check out or update participant bios:<br>

<dd><a href="http://www.members.re-wrenches.org">
www.members.re-wrenches.org</a><br><br>
<br>

</dl><br>
_______________________________________________<br>
List sponsored by Redwood Alliance<br><br>
List Address: RE-wrenches@lists.re-wrenches.org<br><br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" eudora="autourl">
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a>
<br><br>
List-Archive:
<a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" eudora="autourl">
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a>
<br><br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" eudora="autourl">
www.re-wrenches.org/etiquette.htm</a><br><br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org/" eudora="autourl">
www.members.re-wrenches.org</a></blockquote>
 <table style="border-top: 1px solid #aaabb6; margin-top: 30px;">
        <tr>
                <td style="width: 105px; padding-top: 15px;">
                        <a href="https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient" target="_blank"><img src="https://ipmcdn.avast.com/images/logo-avast-v1.png" style="width: 90px; height:33px;"/></a>
                </td>
                <td style="width: 470px; padding-top: 20px; color: #41424e; font-size: 13px; font-family: Arial, Helvetica, sans-serif; line-height: 18px;">This email has been sent from a virus-free computer protected by Avast. <br /><a href="https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient" target="_blank" style="color: #4453ea;">www.avast.com</a>
                </td>
        </tr>
 </table>
</body>
</html>