<div dir="ltr">Hi Carl,<div>I've moved away from this type of installation since alot of the inspectors in this area just don't like it.</div><div>I avoid getting into "code confrontations" with them and prefer to impress them rather than depress them.</div><div>Have you looked at article 110 regarding working clearances?</div><div>Also I've considered a cut in the insulation of a ungrounded source circuit conductor in grounded metal conduit inside a dwelling.</div><div>Maybe i'm looking to deeply into it but I'd rather keep source circuit conductors on the exterior of a dwelling.</div><div>It's hard to back track with the customer when he's been sold on the conduit being hidden and then having to eventually concede to the AHJ.</div><div>Sometimes having your inspector review your installation plan before you install builds a good solid relationship with him and avoids costly reworking.</div><div>I'd rather be happy than right.</div><div>Just Saying</div><div>Pat</div><div class="gmail_extra"><br><div class="gmail_quote">On Mon, Jan 4, 2016 at 10:58 AM, Carl Adams <span dir="ltr"><<a href="mailto:swingjunkie@gmail.com" target="_blank">swingjunkie@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div style="font-size:12.8px;margin-bottom:0px;margin-left:0px;padding-bottom:5px"><div style="overflow:hidden"><div dir="ltr"><div>Fellow Wrenches,<br></div><div class="gmail_quote"><div dir="ltr"><div><br></div><div>We recently failed an inspection on a new PV installation</div><div>We are operating under the 2008 code</div><div>I have attached a small sketch of our conduit routing to clarify things.</div><div><br></div><div>Inspectors note post inspection ...provide a photovoltaic disconnecting means per 690.14 (C)(1) </div><div><br></div><div>During his inspection the inspector was unhappy that we had entered the attic space with the DC source circuits, saying we should have run the conduit across the roof and kept it outside.  Since we entered the building we would need to add a DC disconnect in the attic to meet code.  My thought is that we fall under the exception listed (690.31(E)) since all source circuit internal to the dwelling are in metallic raceways.  I'd like to hear other wrenches chime in on this.</div><div><br></div><div>Our reason for routing things as we did was to keep the installation aesthetics first class and minimize unsightly conduit runs.</div><div><br></div><div>Code section follows</div><div><br></div><div>690.14 Additional Provisions. Photovoltaic disconnecting</div><div>means shall comply with 690.14(A) through (D).690.14 </div><div><br></div><div>(C) Requirements for Disconnecting Means. Means</div><div>shall be provided to disconnect all conductors in a building</div><div>or other structure from the photovoltaic system conductors.</div><div>(1) Location. The photovoltaic disconnecting means shall</div><div>be installed at a readily accessible location either on the</div><div>outside of a building or structure or inside nearest the point</div><div>of entrance of the system conductors.</div><div>Exception: Installations that comply with 690.31(E) shall</div><div>be permitted to have the disconnecting means located remote</div><div>from the point of entry of the system conductors.</div><div>The photovoltaic system disconnecting means shall not</div><div>be installed in bathrooms.</div><div><br></div><div> 690.31 (E) reads as follows</div><div><div>(E) Direct-Current Photovoltaic Source and Output</div><div>Circuits Inside a Building. Where direct-current photovoltaic</div><div>source or output circuits of a utility-interactive inverter</div><div>from a building-integrated or other photovoltaic system are</div><div>run inside a building or structure, they shall be contained in</div><div>metal raceways, or metal enclosures, from the point of penetration</div><div>of the surface of the building or structure to the</div><div>first readily accessible disconnecting means. The disconnecting</div><div>means shall comply with 690.14(A) through (D).</div></div><div><br></div><div><br></div><div><div>With Regards<div>Carl Adams, President</div><div>SunRock Solar, LLC</div><a href="tel:513.290.9072" value="+15132909072" target="_blank">513.290.9072</a> (cell)</div><div><a href="tel:513.766.6025" value="+15137666025" target="_blank">513.766.6025</a> (office)</div><div><br></div><div></div></div></div></div></div></div></div><div style="font-size:12.8px"></div></div>
<br>_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" rel="noreferrer" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br></blockquote></div><br><br clear="all"><div><br></div>-- <br><div class="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div dir="ltr">Patrick A. Shortell<div><i>Licensed Master Electrician</i></div><div><i>Certified Solar Installer</i></div><div>71 Oregon Street</div><div>Long Beach N.Y. 11561</div><div>cell: 516-477-0221</div><div><br></div><div><br></div><div><br></div><div><br></div></div></div></div></div></div>
</div></div>