<font size=2 face="sans-serif">Hi:</font>
<br>
<br><font size=2 face="sans-serif">The Schneider Battery Monitor,</font>
<br>
<br><font size=2 face="sans-serif">1. The battery monitor will operate
independently and store battery information into a micro-SD card. This
info can be accessed by plugging in a USB cord from your laptop to the
BM. The data will show up as a new hard drive in your laptop and
the files will be in EXCEL format. This can be done with any battery
based system, indeed anything with a battery. </font>
<br>
<br><font size=2 face="sans-serif">2. In order to access the data remotely
through the WEB, you will need a COMBOX with<b> Combox firmware rev 3.00
BN 707. </b>A Combox and BM will give you the ability to configure
the BM and collect and access battery data log info over the WEB.</font>
<br>
<br><font size=2 face="sans-serif">3. In order to be able to setup and
control the BM with the SCP, System Control Panel, you will need <b>SCP
firmware rev 2.01 BN 8</b></font>
<br>
<br>
<br><font size=2 face="sans-serif">If you're using the BM on Schneider
battery based equipment then, </font>
<br>
<br><font size=2 face="sans-serif">4. For the generator start module, you
will need <b>AGS firmware rev 3.00 BN 2</b></font>
<br>
<br><font size=2 face="sans-serif">5. For the MPPT-60 charge controller,
you will need <b>MPPT-60 firmware rev 1.07 BN 6</b></font>
<br>
<br><font size=2 face="sans-serif">6. For the HV-MPPT-80 charge controller,
you will need <b>HV-MPPT-80 firmware rev 1.01 BN 1</b></font>
<br>
<br>
<br><font size=2 face="sans-serif">It's ok to have older firmware in any
of the devices, but you will have missing menus and functions such as the
state of charge functions on the XW.</font>
<br>
<br>
<br><font size=2 face="sans-serif">JARMO</font>
<br><font size=2 face="sans-serif"><br>
</font><font size=3 color=#008000>_____________________________________________________________________________________</font><font size=3>
<br>
</font><font size=1 face="Arial"><b><br>
Jarmo Venalainen</b> | </font><font size=1 color=#008000 face="Arial"><b>
Schneider Electric </b></font><font size=1 face="Arial"><b> | Xantrex
Brand</b> | <b>CANADA</b> | <b>Sales Application
Engineer</b> <b><br>
Phone:</b> +604-422-2528 | <b>Tech Support:</b> 800-670-0707
| <b>Mobile:</b> +604-505-0291 <b><br>
Email:</b> </font><a href="mailto:jarmo.venalainen@schneider-electric.com"><font size=1 color=blue face="Arial"><u>jarmo.venalainen@schneider-electric.com</u></font></a><font size=1 face="Arial">
| <b>Site:</b></font><a href=http://www.xantrex.com/ target=_blank><font size=1 color=blue face="Arial"><u>
www.Xantrex.com</u></font></a><font size=1 face="Arial"> |
<b>Address:</b> 3700 Gilmore Way, Burnaby, BC V5G4M1 <br>
</font>
<table>
<tr>
<td colspan=4><a href=http://www.xantrexrebate.com/ target=_blank><img src=cid:_1_0C6434D80C643104007A0C6888257EAC width=1 height=1></a>
<tr>
<td><a href=http://www.xantrex.com/ target=_blank><img src=cid:_1_0C643BA80C6437D4007A0C6888257EAC></a>
<td><a href=https://www.facebook.com/Xantrex target=_blank><img src=cid:_1_0C6443440C643F44007A0C6888257EAC></a>
<td><a href=https://twitter.com/Xantrex target=_blank><img src=cid:_1_0C644AE00C6446E0007A0C6888257EAC></a>
<td><a href=https://twitter.com/Xantrex target=_blank><img src=cid:_1_0C64527C0C644E7C007A0C6888257EAC></a></table>
<br>
<br><font size=1 color=#00a000 face="Arial"><br>
*** Please consider the environment before printing this e-mail</font><font size=3><br>
</font>
<br>
<br>
<br>
<table width=100%>
<tr valign=top>
<td><font size=1 color=#5f5f5f face="sans-serif">From:</font>
<td><font size=1 face="sans-serif">jay <jay.peltz@gmail.com></font>
<tr valign=top>
<td><font size=1 color=#5f5f5f face="sans-serif">To:</font>
<td><font size=1 face="sans-serif">RE-wrenches <re-wrenches@lists.re-wrenches.org>,
</font>
<tr valign=top>
<td><font size=1 color=#5f5f5f face="sans-serif">Date:</font>
<td><font size=1 face="sans-serif">08/24/2015 09:19 PM</font>
<tr valign=top>
<td><font size=1 color=#5f5f5f face="sans-serif">Subject:</font>
<td><font size=1 face="sans-serif">[RE-wrenches] Schneider XW battery monitor</font>
<tr valign=top>
<td><font size=1 color=#5f5f5f face="sans-serif">Sent by:</font>
<td><font size=1 face="sans-serif">"RE-wrenches" <re-wrenches-bounces@lists.re-wrenches.org></font></table>
<br>
<hr noshade>
<br>
<br>
<br><tt><font size=2>HI All,<br>
<br>
Does anybody know where to find what version firmware of the SCP/inverter/CC
that the XW battery monitor needs to work with?<br>
I can’t seem to find that data.<br>
<br>
<br>
thanks<br>
jay<br>
<br>
<br>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: RE-wrenches@lists.re-wrenches.org<br>
<br>
Change listserver email address & settings:<br>
</font></tt><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org"><tt><font size=2>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</font></tt></a><tt><font size=2><br>
<br>
List-Archive: </font></tt><a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html"><tt><font size=2>http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</font></tt></a><tt><font size=2><br>
<br>
List rules & etiquette:<br>
</font></tt><a href="www.re-wrenches.org/etiquette.htm"><tt><font size=2>www.re-wrenches.org/etiquette.htm</font></tt></a><tt><font size=2><br>
<br>
Check out or update participant bios:<br>
</font></tt><a href="www.members.re-wrenches.org"><tt><font size=2>www.members.re-wrenches.org</font></tt></a><tt><font size=2><br>
<br>
<br>
______________________________________________________________________<br>
This email has been scanned by the Symantec Email Security.cloud service.<br>
______________________________________________________________________<br>
</font></tt>
<br>
<br>