<div dir="ltr"><div><div><div><div>Wrenches<br></div>Some time back there was discussion on the conductor size and efficiency rating requirement for long DC runs.<br></div>What I am looking at is this, 400 feet of MCM 400 to keep the line loss at or below 1% per NEC code for an off grid application, cost vs return is not acceptable. 2/0 is less than 2.5% and the cost is far less. Specs are 4 strings of 3, 250 watt modules feeding one Outback FM 80 charge controller. There are lots of things I can do like SMA instread, or 200 VDC charge controller but nothing can be changed except the wire gauge. Does anyone recall a thread with this topic.<br><br></div>thoughts ??<br></div>Jerry<br></div>