<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=content-type content="text/html; charset=utf-8">
<META content="MSHTML 6.00.2900.6550" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY dir=auto bgColor=#ffffff>
<DIV>For about the last year, DPW has been sending all the 5/16" nuts which work
with their mid and end clamps plus the foot-to-rail connection, splices,
etc with a polymer coating on the threads. Since then I have had zero
issues with galling or backing nuts off for fine tuning alignments. If
your rack manu is not doing this job for you, maybe its time for a phone
call.</DIV>
<DIV> </DIV>
<DIV>Bill</DIV>
<DIV> </DIV>
<DIV>Feather River Solar Electric</DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=benn@skyfireenergy.com href="mailto:benn@skyfireenergy.com">Benn
Kilburn</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=re-wrenches@lists.re-wrenches.org
href="mailto:re-wrenches@lists.re-wrenches.org">RE-wrenches</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Monday, June 29, 2015 10:03
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [RE-wrenches]
SnapNrack</DIV>
<DIV><BR></DIV>
<DIV>Good points Ray. </DIV>
<DIV>I always warn the crews of galling and to avoid spinning the SS hardware
to fast. Another tip is to try to keep the SS hardware out of direct sun prior
to using it. </DIV>
<DIV>Kinetic tells me that their threaded hardware comes with a clear coat of
anti-seize. <BR><BR>
<DIV>Benn Kilburn</DIV>
<DIV>SkyFire Energy Inc. </DIV>
<DIV>780-906-7807</DIV>
<DIV><BR></DIV></DIV>
<DIV><BR>On Jun 28, 2015, at 3:27 PM, Ray Walters <<A
href="mailto:ray@solarray.com">ray@solarray.com</A>> wrote:<BR><BR></DIV>
<BLOCKQUOTE type="cite">
<DIV>Besides your note that cordless impact drivers can over torque the
clamps, also they spin the bolts too fast which can lead to spalling of the
SS hardware.<BR>We now hand torque those connects. Finally, most
torque specs are for lubricated bolts. We use anti-seize on the
threads before torquing.<BR>Using a cordless impact driver and no lube can
cause not only module damage but also clamp damage, and end up with clamps
not actually securing the modules, because the bolts spalled out before
fully clamping.<BR><PRE class=moz-signature cols="72">R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760</PRE>
<DIV class=moz-cite-prefix>On 6/28/2015 3:06 PM, Benn Kilburn
wrote:<BR></DIV>
<BLOCKQUOTE
cite=mid:CAER8s1a3d2hE23xr8pOYu=t0OdnsL=s_RBdtLq2YpoD=LEigKQ@mail.gmail.com
type="cite">
<DIV dir=ltr>
<DIV class=gmail_default style="FONT-FAMILY: trebuchet
ms,sans-serif">Chris,<BR></DIV>
<DIV class=gmail_default style="FONT-FAMILY: trebuchet
ms,sans-serif">It sounds (to me) that you are describing the
bonding "tooth" dug through the aluminum frame and into the glass? or at
least compressed the frame enough to break the glass? If that is the
case then i'm betting that the clamp bolt was way over-torqued.<BR><BR>You
need to check the recommended tightening torque for the module and for the
racking system you are using. For example, what we are using these
days, Kinetic, the tightening torque for mid and end clamps is 12 ft-lb
and here are some recommended clamping <SPAN class="">torques</SPAN> from
some different module mfgrs....<BR>
<DIV class=gmail_default style="FONT-FAMILY: trebuchet
ms,sans-serif">Conergy 8 NM - 6 ft-lb<BR></DIV>
<DIV class=gmail_default style="FONT-FAMILY: trebuchet
ms,sans-serif">Hanwha 5 NM - 3.7 ft-lb<BR></DIV>
<DIV class=gmail_default style="FONT-FAMILY: trebuchet
ms,sans-serif">JA Solar 18-24 NM - 13-18 ft-lb<BR></DIV>These
likely vary based on the construction of the module frame.<BR>I've also
found that some module mfgrs do not list recommended <SPAN
class="">tightening</SPAN> <SPAN class="">torques</SPAN> in their install
manuals, so best to use discretion.<BR><BR>We had a module break after
clamping it down. The crew described it as 'putting the module in
place, clamping it down and turning around to grab the next module and
hearing a 'crack' followed by the crackling glass sound (if you have ever
heard a module break, the crackling sound can last for a few
minutes). The break pattern in the glass seemed to focus on a
particular mid clamp. I used a torque wrench, set at around 10 ft-lb
and checked all the mid-clamp bolts, increasing the torque setting by a
few ft-lb each time until it finally turned a bolt instead of
clicking. I found that most of the bolts were close to 30 ft-lb and
the one that appeared to break the glass was about 34 ft-lb.<BR></DIV>
<DIV class=gmail_default style="FONT-FAMILY: trebuchet
ms,sans-serif">Suffice to say, we were getting carried away with
tightening using cordless impact drivers. <BR></DIV>
<DIV class=gmail_default style="FONT-FAMILY: trebuchet
ms,sans-serif">At that point i and the rest of the crew started
using the torque wrench as we were going along until we had a better feel
for what was the proper torque. (i've done this before, but it is
something that needs to be self "re-calibrated" often. <BR></DIV>
<DIV class=gmail_default style="FONT-FAMILY: trebuchet
ms,sans-serif"><BR></DIV></DIV>
<DIV class=gmail_extra><BR clear=all>
<DIV>
<DIV class=gmail_signature>
<DIV style="TEXT-ALIGN: left"><STRONG
style="PADDING-RIGHT: 0px; PADDING-LEFT: 0px; PADDING-BOTTOM: 0px; MARGIN: 0px; PADDING-TOP: 0px">Benn
Kilburn <SPAN style="FONT-SIZE: 9px"></SPAN></STRONG></DIV>
<DIV style="TEXT-ALIGN: left">CSA Certified Solar Photovoltaic Systems
Electrician, SkyFire Energy Inc</DIV>
<DIV style="TEXT-ALIGN: left">6706 – 82 Ave NW | Edmonton, AB | T6B
0E7</DIV>
<DIV style="TEXT-ALIGN: left">P: 780-474-8992 | F:
888-405-5843 | <A
style="BORDER-RIGHT: 0px; PADDING-RIGHT: 0px; BORDER-TOP: 0px; PADDING-LEFT: 0px; PADDING-BOTTOM: 0px; MARGIN: 0px; BORDER-LEFT: 0px; COLOR: rgb(240,140,0); PADDING-TOP: 0px; BORDER-BOTTOM: 0px; TEXT-DECORATION: none"
href="http://www.skyfireenergy.com/" target=_blank
moz-do-not-send="true">www.skyfireenergy.com</A></DIV><A
style="BORDER-RIGHT: 0px; PADDING-RIGHT: 0px; BORDER-TOP: 0px; PADDING-LEFT: 0px; PADDING-BOTTOM: 0px; MARGIN: 0px; BORDER-LEFT: 0px; COLOR: rgb(240,140,0); PADDING-TOP: 0px; BORDER-BOTTOM: 0px; TEXT-DECORATION: none"
href="mailto:benn@skyfireenergy.com" target=_blank
moz-do-not-send="true"><IMG
style="BORDER-RIGHT: 0px; PADDING-RIGHT: 0px; BORDER-TOP: 0px; PADDING-LEFT: 0px; PADDING-BOTTOM: 0px; MARGIN: 0px; BORDER-LEFT: 0px; PADDING-TOP: 0px; BORDER-BOTTOM: 0px"
height=25 alt=email
src="http://www.skyfireenergy.com/wp-content/uploads/2014/08/email.png"
width=25 moz-do-not-send="true"></A> <A
style="BORDER-RIGHT: 0px; PADDING-RIGHT: 0px; BORDER-TOP: 0px; PADDING-LEFT: 0px; PADDING-BOTTOM: 0px; MARGIN: 0px; BORDER-LEFT: 0px; COLOR: rgb(240,140,0); PADDING-TOP: 0px; BORDER-BOTTOM: 0px; TEXT-DECORATION: none"
href="https://www.facebook.com/SkyFireEnergy" target=_blank
moz-do-not-send="true"><IMG
style="BORDER-RIGHT: 0px; PADDING-RIGHT: 0px; BORDER-TOP: 0px; PADDING-LEFT: 0px; PADDING-BOTTOM: 0px; MARGIN: 0px; BORDER-LEFT: 0px; PADDING-TOP: 0px; BORDER-BOTTOM: 0px"
height=25 alt=facebook
src="http://www.skyfireenergy.com/wp-content/uploads/2014/08/facebook.png"
width=25 moz-do-not-send="true"></A> <A
style="BORDER-RIGHT: 0px; PADDING-RIGHT: 0px; BORDER-TOP: 0px; PADDING-LEFT: 0px; PADDING-BOTTOM: 0px; MARGIN: 0px; BORDER-LEFT: 0px; COLOR: rgb(240,140,0); PADDING-TOP: 0px; BORDER-BOTTOM: 0px; TEXT-DECORATION: none"
href="https://twitter.com/SkyFireEnergy" target=_blank
moz-do-not-send="true"><IMG
style="BORDER-RIGHT: 0px; PADDING-RIGHT: 0px; BORDER-TOP: 0px; PADDING-LEFT: 0px; PADDING-BOTTOM: 0px; MARGIN: 0px; BORDER-LEFT: 0px; PADDING-TOP: 0px; BORDER-BOTTOM: 0px"
height=25 alt=twitter
src="http://www.skyfireenergy.com/wp-content/uploads/2014/08/twitter.png"
width=25 moz-do-not-send="true"></A> <A
style="BORDER-RIGHT: 0px; PADDING-RIGHT: 0px; BORDER-TOP: 0px; PADDING-LEFT: 0px; PADDING-BOTTOM: 0px; MARGIN: 0px; BORDER-LEFT: 0px; COLOR: rgb(240,140,0); PADDING-TOP: 0px; BORDER-BOTTOM: 0px; TEXT-DECORATION: none"
href="https://www.linkedin.com/company/283735?trk=tyah&trkInfo=tarId%3A1408655033432%2Ctas%3Askyfire%2Cidx%3A2-2-5"
target=_blank moz-do-not-send="true"><IMG
style="BORDER-RIGHT: 0px; PADDING-RIGHT: 0px; BORDER-TOP: 0px; PADDING-LEFT: 0px; PADDING-BOTTOM: 0px; MARGIN: 0px; BORDER-LEFT: 0px; PADDING-TOP: 0px; BORDER-BOTTOM: 0px"
height=25 alt=linkedin
src="http://www.skyfireenergy.com/wp-content/uploads/2014/08/linkedin.png"
width=25 moz-do-not-send="true"></A> <A
style="BORDER-RIGHT: 0px; PADDING-RIGHT: 0px; BORDER-TOP: 0px; PADDING-LEFT: 0px; PADDING-BOTTOM: 0px; MARGIN: 0px; BORDER-LEFT: 0px; COLOR: rgb(240,140,0); PADDING-TOP: 0px; BORDER-BOTTOM: 0px; TEXT-DECORATION: none"
href="https://plus.google.com/+SkyFireEnergy/" target=_blank
moz-do-not-send="true"><IMG
style="BORDER-RIGHT: 0px; PADDING-RIGHT: 0px; BORDER-TOP: 0px; PADDING-LEFT: 0px; PADDING-BOTTOM: 0px; MARGIN: 0px; BORDER-LEFT: 0px; PADDING-TOP: 0px; BORDER-BOTTOM: 0px"
height=25 alt=google
src="http://www.skyfireenergy.com/wp-content/uploads/2014/08/google.png"
width=25 moz-do-not-send="true"></A>
<P
style="PADDING-RIGHT: 0px; PADDING-LEFT: 0px; FONT-SIZE: 13px; PADDING-BOTTOM: 1em; MARGIN: 0px; COLOR: rgb(0,0,0); LINE-HEIGHT: 18px; PADDING-TOP: 1em; FONT-FAMILY: helvetica,sans-serif; TEXT-ALIGN: justify"><IMG
style="BORDER-RIGHT: 0px; PADDING-RIGHT: 0px; BORDER-TOP: 0px; PADDING-LEFT: 0px; PADDING-BOTTOM: 0px; MARGIN: 0px; BORDER-LEFT: 0px; PADDING-TOP: 0px; BORDER-BOTTOM: 0px"
height=47 alt="SkyFire Energy
Logo_horizontal"
src="http://www.skyfireenergy.com/wp-content/uploads/2014/07/SkyFire-Energy-Logo_horizontal.png"
width=179 moz-do-not-send="true"></P></DIV></DIV><BR>
<DIV class=gmail_quote>On Thu, Jun 25, 2015 at 5:11 PM, Chris Worcester
<SPAN dir=ltr><<A href="mailto:chris@solarwindworks.com" target=_blank
moz-do-not-send="true">chris@solarwindworks.com</A>></SPAN> wrote:<BR>
<BLOCKQUOTE class=gmail_quote
style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
<DIV lang=EN-US vlink="purple" link="blue">
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 11pt; COLOR: #1f497d; FONT-FAMILY: 'Calibri','sans-serif'">Hi
Jason,</SPAN></P>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 11pt; COLOR: #1f497d; FONT-FAMILY: 'Calibri','sans-serif'">Have
you or others been using the new UniRac SM mid and end clamps with the
integrated bonding yet? My concern is the “</SPAN><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'PTSans-Regular','sans-serif'">Stainless
steel Midclamp points, 2 per module, pierce module frame anodization to
bond module to module through clamp.”</SPAN><SPAN
style="FONT-SIZE: 10pt; COLOR: #1f497d; FONT-FAMILY: 'Calibri','sans-serif'"></SPAN></P>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 11pt; COLOR: #1f497d; FONT-FAMILY: 'Calibri','sans-serif'">We
had an MSI Alpha + self-bonding midclamp shatter the glass on an LG 280
last fall, as the factory set point was sticking out too far, so as it
was being tightened down, on top of the module the point dug through the
module’s top frame hitting the glass, shattering it.</SPAN></P>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 11pt; COLOR: #1f497d; FONT-FAMILY: 'Calibri','sans-serif'">I
do wonder if there are any issues with this “point” on the UniRac
midclamps potential for doing the same damage?</SPAN></P>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 11pt; COLOR: #1f497d; FONT-FAMILY: 'Calibri','sans-serif'"></SPAN> </P>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 11pt; COLOR: #1f497d; FONT-FAMILY: 'Calibri','sans-serif'">Chris
Worcester</SPAN></P>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 11pt; COLOR: #1f497d; FONT-FAMILY: 'Calibri','sans-serif'">Solar
Wind Works</SPAN></P>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 11pt; COLOR: #1f497d; FONT-FAMILY: 'Calibri','sans-serif'">NABCEP
Certified PV Installer</SPAN></P>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 11pt; COLOR: #1f497d; FONT-FAMILY: 'Calibri','sans-serif'">Office
<A href="tel:530-582-4503" target=_blank moz-do-not-send="true"
value="+15305824503">530-582-4503</A></SPAN></P>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 11pt; COLOR: #1f497d; FONT-FAMILY: 'Calibri','sans-serif'">Cell
<A href="tel:530-448-9692" target=_blank moz-do-not-send="true"
value="+15304489692">530-448-9692</A></SPAN></P>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 11pt; COLOR: #1f497d; FONT-FAMILY: 'Calibri','sans-serif'">Fax
<A href="tel:530-582-4603" target=_blank moz-do-not-send="true"
value="+15305824603">530-582-4603</A></SPAN></P>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 11pt; COLOR: #1f497d; FONT-FAMILY: 'Calibri','sans-serif'"><A
href="http://www.solarwindworks.com" target=_blank
moz-do-not-send="true">www.solarwindworks.com</A></SPAN></P>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 11pt; COLOR: #1f497d; FONT-FAMILY: 'Calibri','sans-serif'"><A
href="mailto:chris@solarwindworks.com" target=_blank
moz-do-not-send="true">chris@solarwindworks.com</A></SPAN></P>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 11pt; COLOR: #1f497d; FONT-FAMILY: 'Calibri','sans-serif'"></SPAN> </P>
<P class=MsoNormal><B><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Tahoma','sans-serif'">From:</SPAN></B><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Tahoma','sans-serif'"> RE-wrenches
[mailto:<A href="mailto:re-wrenches-bounces@lists.re-wrenches.org"
target=_blank
moz-do-not-send="true">re-wrenches-bounces@lists.re-wrenches.org</A>]
<B>On Behalf Of </B>Jason Szumlanski<BR><B>Sent:</B> Thursday, June 25,
2015 1:13 PM<SPAN class=""><BR><B>To:</B> RE-wrenches<BR><B>Subject:</B>
Re: [RE-wrenches] SnapNrack</SPAN></SPAN></P>
<P class=MsoNormal> </P>
<DIV>
<P class=MsoNormal>That decision was based on our distribution network
offering better pricing on Unirac, and engineers being comfortable with
it. Now with the integrated grounding from Unirac, I can't see moving
away from it again barring a significant cost benefit. It also stacks
and stocks easier than the Ironridge rails.</P>
<DIV>
<P class=MsoNormal><BR clear=all></P>
<DIV>
<DIV>
<DIV>
<DIV>
<DIV>
<DIV>
<DIV>
<DIV>
<DIV>
<P
class=MsoNormal> </P></DIV></DIV></DIV></DIV></DIV></DIV></DIV></DIV></DIV>
<P class=MsoNormal> </P>
<DIV>
<DIV>
<DIV class=h5>
<P class=MsoNormal>On Wed, Jun 24, 2015 at 5:55 PM, Dana Brandt <<A
href="mailto:dana@ecotechenergy.com" target=_blank
moz-do-not-send="true">dana@ecotechenergy.com</A>> wrote:</P>
<DIV>
<DIV>
<DIV>
<P class=MsoNormal style="MARGIN-BOTTOM: 12pt">Hi Jason,</P></DIV>
<P class=MsoNormal style="MARGIN-BOTTOM: 12pt">We've used Unirac for
years but have been contemplating Ironridge. I'm curious what your
experience was and why you went back to Unirac? <BR><BR>Anyone else have
input on best racking systems for flush-mounted residential systems on
comp roof? </P></DIV>
<P class=MsoNormal>Thanks,</P>
<DIV>
<P class=MsoNormal><BR clear=all></P>
<DIV>
<DIV>
<DIV>
<P class=MsoNormal>Dana<BR><BR>Dana Brandt<BR>Ecotech Energy Systems,
LLC<BR><A href="http://www.ecotechenergy.com" target=_blank
moz-do-not-send="true">www.ecotechenergy.com</A><BR><A
href="mailto:dana@ecotechenergy.com" target=_blank
moz-do-not-send="true">dana@ecotechenergy.com</A><BR><A
href="tel:360.318.7646" target=_blank
moz-do-not-send="true">360.318.7646</A></P></DIV></DIV></DIV>
<P class=MsoNormal> </P>
<DIV>
<P class=MsoNormal>On Wed, Feb 5, 2014 at 12:09 PM, Jason Szumlanski
<<A href="mailto:jason@fafcosolar.com" target=_blank
moz-do-not-send="true">jason@fafcosolar.com</A>> wrote:</P>
<DIV>
<DIV>
<P class=MsoNormal><SPAN style="FONT-FAMILY: 'Verdana','sans-serif'">By
Snap N Rack, you mean Sun Run...</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Verdana','sans-serif'"></SPAN> </P></DIV>
<DIV>
<P class=MsoNormal><SPAN style="FONT-FAMILY: 'Verdana','sans-serif'"><A
href="http://cleantechnica.com/2014/02/05/sunrun-acquires-rec-solars-residential-business-aee-solar-snapnrack-means/"
target=_blank
moz-do-not-send="true">http://cleantechnica.com/2014/02/05/sunrun-acquires-rec-solars-residential-business-aee-solar-snapnrack-means/</A></SPAN></P></DIV>
<DIV>
<P class=MsoNormal> </P></DIV>
<DIV>
<P class=MsoNormal><SPAN style="FONT-FAMILY: 'Verdana','sans-serif'">I'm
curious if these vertical integrators will still make their acquired
brands available to small dealers through distribution. When SolarCity
snatched up Zep, I had concerns about being able to service or add onto
existing Zep systems we installed. That's definitely a concern going
forward, and reason to perhaps stick with the most compatible racking
solutions available. We used IronRidge for a while, which is largely
compatible with Unirac, but now we're back on the Unirac
bandwagon. </SPAN></P></DIV>
<DIV>
<P class=MsoNormal> </P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-FAMILY: 'Verdana','sans-serif'">Interesting
times...</SPAN></P></DIV>
<P class=MsoNormal style="MARGIN-BOTTOM: 12pt"> </P>
<DIV>
<DIV>
<DIV style="MARGIN-BOTTOM: 6pt">
<P style="MARGIN: 0in 0in 0pt"><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Verdana','sans-serif'">Jason
Szumlanski</SPAN></P>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'"></SPAN><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Verdana','sans-serif'">Fafco
Solar</SPAN><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'"></SPAN><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Verdana','sans-serif'"></SPAN></P></DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Verdana','sans-serif'"></SPAN> </P></DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Verdana','sans-serif'"><IMG
height=1
src="https://wisestamp.appspot.com/pixview.gif?p=chrome&v=3.31.0&t=1391630669252&u=ce9344a8140ce271"
width=1 border=0 moz-do-not-send="true"></SPAN></P></DIV></DIV></DIV>
<DIV>
<DIV>
<DIV>
<P class=MsoNormal style="MARGIN-BOTTOM: 12pt"> </P>
<DIV>
<P class=MsoNormal>On Wed, Feb 5, 2014 at 12:45 PM, Max Balchowsky
<<A href="mailto:max@seesolar.com" target=_blank
moz-do-not-send="true">max@seesolar.com</A>> wrote:</P>
<DIV>
<DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">We have been
using Snap N' Rack for a while, Have lots of installs in Hawaii - so far
no problems, I like the convenience of the design for snapping in the
slider nut in mid rail, and also the ability to install the panels flush
with the end of the rails….</SPAN></P></DIV>
<DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'"></SPAN> </P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Tahoma','sans-serif'">Max
Balchowsky<BR>Design Engineer<BR>SEE Systems<BR>1048 Irvine Ave Suite
217<BR>Newport Beach, Ca. 92660<BR><A href="tel:760-403-6810"
target=_blank moz-do-not-send="true">760-403-6810</A></SPAN><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'"></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 7.5pt; FONT-FAMILY: 'Tahoma','sans-serif'">"Building a
Better Future For The Next Generation"</SPAN><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Tahoma','sans-serif'"></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'"></SPAN> </P></DIV></DIV>
<DIV>
<DIV>
<DIV>
<DIV class=MsoNormal style="TEXT-ALIGN: center" align=center>
<HR align=center width="100%" SIZE=1>
</DIV>
<P class=MsoNormal><B><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'">From:</SPAN></B><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'"> Allen Frishman <<A
href="mailto:amfrish@aeonsolar.com" target=_blank
moz-do-not-send="true">amfrish@aeonsolar.com</A>><BR><B>To:</B>
RE-wrenches <<A href="mailto:re-wrenches@lists.re-wrenches.org"
target=_blank
moz-do-not-send="true">re-wrenches@lists.re-wrenches.org</A>>
<BR><B>Sent:</B> Wednesday, February 5, 2014 6:17 AM<BR><B>Subject:</B>
Re: [RE-wrenches] SnapNrack</SPAN></P></DIV>
<DIV>
<DIV>
<DIV>
<P class=MsoNormal> </P>
<DIV>
<DIV>
<P class=MsoNormal>I am curious about the mid clamps on the snapnrack.
The flange that rests on top of the solar panel frame is so small
~ 3/16". Anyone experience any problems with these failing
in a big storm? With solar panel frames not being square it
is nice to have a little extra to grab - I am always curious as to why
these clips are made with such a small area to hold the panels down.
</P>
<DIV>
<P class=MsoNormal> </P></DIV>
<DIV>
<P class=MsoNormal>All feedback on these clips is appreciated.</P>
<DIV>
<DIV>
<DIV>
<P class=MsoNormal><I><SPAN
style="FONT-SIZE: 10.5pt; FONT-FAMILY: 'Helvetica','sans-serif'">Al
Frishman</SPAN></I><SPAN
style="FONT-SIZE: 13.5pt; FONT-FAMILY: 'Helvetica','sans-serif'"><BR><SPAN
style="COLOR: #030100">Aeon</SPAN><SPAN
style="COLOR: #ff9700">Solar</SPAN></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><I><SPAN
style="FONT-SIZE: 10.5pt; FONT-FAMILY: 'Helvetica','sans-serif'"><A
href="tel:%28917%29%20699-6641" target=_blank moz-do-not-send="true"
value="+19176996641">(917) 699-6641</A> - cell</SPAN></I><SPAN
style="FONT-SIZE: 10.5pt; FONT-FAMILY: 'Helvetica','sans-serif'"><BR><I><A
href="tel:%28888%29%20460-2867" target=_blank moz-do-not-send="true"
value="+18884602867">(888) 460-2867</A></I><BR><I><A
href="http://www.aeonsolar.com/" target=_blank
moz-do-not-send="true">www.aeonsolar.com</A></I></SPAN><SPAN
style="FONT-SIZE: 13.5pt; FONT-FAMILY: 'Helvetica','sans-serif'"></SPAN></P></DIV></DIV></DIV>
<P class=MsoNormal> </P>
<DIV>
<DIV>
<P class=MsoNormal>On Jun 1, 2013, at 10:41 AM, Max Balchowsky
wrote:</P></DIV>
<P class=MsoNormal><BR><BR></P>
<DIV>
<DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">Have
installed last three systems (35Kw)with snap n rack.</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">love
it....</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'"></SPAN> </P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Tahoma','sans-serif'">Max
Balchowsky<BR>Design Engineer<BR>SEE Systems</SPAN><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'"><BR></SPAN><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Tahoma','sans-serif'">1048 Irvine
Ave Suite 217<BR>Newport Beach, Ca. 92660<BR><A href="tel:760-403-6810"
target=_blank moz-do-not-send="true">760-403-6810</A></SPAN><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'"></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 7.5pt; FONT-FAMILY: 'Tahoma','sans-serif'">"Building a
Better Future For The Next Generation"</SPAN><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Tahoma','sans-serif'"></SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'"></SPAN> </P></DIV>
<DIV>
<DIV>
<DIV>
<DIV class=MsoNormal style="TEXT-ALIGN: center" align=center>
<HR align=center width="100%" SIZE=1>
</DIV>
<P class=MsoNormal><B><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'">From:</SPAN></B><SPAN
style="FONT-FAMILY: 'Arial','sans-serif'"> Solarguy <<A
href="mailto:ntrei@1scom.net" target=_blank
moz-do-not-send="true">ntrei@1scom.net</A>><BR><B>To:</B>
'RE-wrenches' <<A href="mailto:re-wrenches@lists.re-wrenches.org"
target=_blank
moz-do-not-send="true">re-wrenches@lists.re-wrenches.org</A>>
<BR><B>Sent:</B> Friday, May 31, 2013 10:11 PM<BR><B>Subject:</B> Re:
[RE-wrenches] SnapNrack</SPAN></P></DIV>
<DIV>
<P class=MsoNormal> </P>
<DIV>
<DIV>
<DIV>
<DIV>
<P class=MsoNormal><SPAN style="FONT-SIZE: 14pt">The only complaint with
the Snapnrack rails is the thin wall can easily be distorted. This will
allow the nut to drop out of its groove. Love the universal end clamps
but have learned to assemble every one to check for proper fit before
getting on the roof.</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN style="FONT-SIZE: 14pt">Jim
Duncan</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN style="FONT-SIZE: 14pt">-----Original
Message-----<BR>From: <A
href="mailto:re-wrenches-bounces@lists.re-wrenches.org" target=_blank
moz-do-not-send="true">re-wrenches-bounces@lists.re-wrenches.org</A>
[mailto:<A href="mailto:re-wrenches-bounces@lists.re-wrenches.org"
target=_blank
moz-do-not-send="true">re-wrenches-bounces@lists.re-wrenches.org</A>] On
Behalf Of Drake<BR>Sent: Friday, May 31, 2013 7:32 PM</SPAN><BR>To: <A
href="mailto:re-wrenches@lists.re-wrenches.org" target=_blank
moz-do-not-send="true">re-wrenches@lists.re-wrenches.org</A><BR>Subject:
[RE-wrenches] SnapNrack</P></DIV>
<DIV>
<P class=MsoNormal> </P></DIV>
<DIV>
<P class=MsoNormal>Hello Wrenches,</P></DIV>
<DIV>
<P class=MsoNormal> </P></DIV>
<DIV>
<P class=MsoNormal>How would you rate the SnapNrack mounting systems
against Unirac and other mounting systems?</P></DIV>
<DIV>
<P class=MsoNormal> </P></DIV>
<DIV>
<P class=MsoNormal>Thanks,</P></DIV>
<DIV>
<P class=MsoNormal> </P></DIV>
<DIV>
<P class=MsoNormal>Drake</P></DIV>
<DIV>
<P class=MsoNormal> </P></DIV>
<DIV>
<P
class=MsoNormal>_______________________________________________</P></DIV>
<DIV>
<P class=MsoNormal>List sponsored by Home Power magazine</P></DIV>
<DIV>
<P class=MsoNormal> </P></DIV>
<DIV>
<P class=MsoNormal>List Address: <A
href="mailto:RE-wrenches@lists.re-wrenches.org" target=_blank
moz-do-not-send="true"><SPAN
style="COLOR: windowtext; TEXT-DECORATION: none">RE-wrenches@lists.re-wrenches.org</SPAN></A></P></DIV>
<DIV>
<P class=MsoNormal> </P></DIV>
<DIV>
<P class=MsoNormal>Change email address & settings:</P></DIV>
<DIV>
<P class=MsoNormal><A
href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org"
target=_blank moz-do-not-send="true"><SPAN
style="COLOR: windowtext; TEXT-DECORATION: none">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</SPAN></A></P></DIV>
<DIV>
<P class=MsoNormal> </P></DIV>
<DIV>
<P class=MsoNormal>List-Archive: <A
href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org"
target=_blank moz-do-not-send="true"><SPAN
style="COLOR: windowtext; TEXT-DECORATION: none">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</SPAN></A></P></DIV>
<DIV>
<P class=MsoNormal> </P></DIV>
<DIV>
<P class=MsoNormal>List rules & etiquette:</P></DIV>
<DIV>
<P class=MsoNormal><A href="http://www.re-wrenches.org/etiquette.htm"
target=_blank moz-do-not-send="true"><SPAN
style="COLOR: windowtext; TEXT-DECORATION: none">www.re-wrenches.org/etiquette.htm</SPAN></A></P></DIV>
<DIV>
<P class=MsoNormal> </P></DIV>
<DIV>
<P class=MsoNormal>Check out participant bios:</P></DIV>
<DIV>
<P class=MsoNormal><A href="http://www.members.re-wrenches.org/"
target=_blank moz-do-not-send="true"><SPAN
style="COLOR: windowtext; TEXT-DECORATION: none">www.members.re-wrenches.org</SPAN></A></P></DIV></DIV></DIV></DIV>
<P class=MsoNormal
style="MARGIN-BOTTOM: 12pt"><BR>_______________________________________________<BR>List
sponsored by Home Power magazine<BR><BR>List Address: <A
href="mailto:RE-wrenches@lists.re-wrenches.org" target=_blank
moz-do-not-send="true">RE-wrenches@lists.re-wrenches.org</A><BR><BR>Change
email address & settings:<BR><A
href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org"
target=_blank
moz-do-not-send="true">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</A><BR><BR>List-Archive:
<A
href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org"
target=_blank
moz-do-not-send="true">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</A><BR><BR>List
rules & etiquette:<BR><A
href="http://www.re-wrenches.org/etiquette.htm" target=_blank
moz-do-not-send="true">www.re-wrenches.org/etiquette.htm</A><BR><BR>Check
out participant bios:<BR><A href="http://www.members.re-wrenches.org/"
target=_blank
moz-do-not-send="true">www.members.re-wrenches.org</A><BR><BR><BR></P></DIV></DIV></DIV>
<DIV>
<DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">Preferences</SPAN></P></DIV></DIV>
<DIV>
<DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">§</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">1</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">2</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">3</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">4</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">5</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">6</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">7</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">8</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">9</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">0</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">-</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">=</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">Backspace</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">Tab</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">q</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">w</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">e</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">r</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">t</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">y</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">u</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">i</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">o</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">p</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">[</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">]</SPAN></P></DIV>
<DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">Return</SPAN></P></DIV></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">capslock</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">a</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">s</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">d</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">f</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">g</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">h</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">j</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">k</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">l</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">;</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">'</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">\</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">shift</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">`</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">z</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">x</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">c</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">v</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">b</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">n</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">m</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">,</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">.</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">/</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">shift</SPAN></P></DIV>
<DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">English</SPAN></P></DIV>
<DIV>
<DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">Deutsch</SPAN></P></DIV></DIV>
<DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">Español</SPAN></P></DIV></DIV>
<DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">Français</SPAN></P></DIV></DIV>
<DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">Italiano</SPAN></P></DIV></DIV>
<DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">Polski</SPAN></P></DIV></DIV>
<DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">Português</SPAN></P></DIV></DIV>
<DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">Русский</SPAN></P></DIV></DIV></DIV></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">alt</SPAN></P></DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">alt</SPAN></P></DIV></DIV></DIV></DIV>
<DIV>
<DIV>
<DIV>
<P class=MsoNormal><SPAN
style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">Preferences</SPAN></P></DIV></DIV></DIV></DIV></DIV>
<P class=MsoNormal
style="MARGIN-BOTTOM: 12pt">_______________________________________________<BR>List
sponsored by Home Power magazine<BR><BR>List Address: <A
href="mailto:RE-wrenches@lists.re-wrenches.org" target=_blank
moz-do-not-send="true">RE-wrenches@lists.re-wrenches.org</A><BR><BR>Change
email address & settings:<BR><A
href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org"
target=_blank
moz-do-not-send="true">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</A><BR><BR>List-Archive:
<A
href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org"
target=_blank
moz-do-not-send="true">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</A><BR><BR>List
rules & etiquette:<BR><A
href="http://www.re-wrenches.org/etiquette.htm" target=_blank
moz-do-not-send="true">www.re-wrenches.org/etiquette.htm</A><BR><BR>Check
out participant bios:<BR><A href="http://www.members.re-wrenches.org"
target=_blank
moz-do-not-send="true">www.members.re-wrenches.org</A></P></DIV>
<P class=MsoNormal> </P></DIV></DIV></DIV>
<P class=MsoNormal
style="MARGIN-BOTTOM: 12pt"><BR>_______________________________________________<BR>List
sponsored by Home Power magazine<BR><BR>List Address: <A
href="mailto:RE-wrenches@lists.re-wrenches.org" target=_blank
moz-do-not-send="true">RE-wrenches@lists.re-wrenches.org</A><BR><BR>Change
email address & settings:<BR><A
href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org"
target=_blank
moz-do-not-send="true">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</A><BR><BR>List-Archive:
<A
href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org"
target=_blank
moz-do-not-send="true">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</A><BR><BR>List
rules & etiquette:<BR><A
href="http://www.re-wrenches.org/etiquette.htm" target=_blank
moz-do-not-send="true">www.re-wrenches.org/etiquette.htm</A><BR><BR>Check
out participant bios:<BR><A href="http://www.members.re-wrenches.org"
target=_blank
moz-do-not-send="true">www.members.re-wrenches.org</A><BR><BR><BR></P></DIV></DIV></DIV></DIV></DIV></DIV></DIV>
<P class=MsoNormal
style="MARGIN-BOTTOM: 12pt"><BR>_______________________________________________<BR>List
sponsored by Home Power magazine<BR><BR>List Address: <A
href="mailto:RE-wrenches@lists.re-wrenches.org" target=_blank
moz-do-not-send="true">RE-wrenches@lists.re-wrenches.org</A><BR><BR>Change
email address & settings:<BR><A
href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org"
target=_blank
moz-do-not-send="true">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</A><BR><BR>List-Archive:
<A
href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org"
target=_blank
moz-do-not-send="true">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</A><BR><BR>List
rules & etiquette:<BR><A
href="http://www.re-wrenches.org/etiquette.htm" target=_blank
moz-do-not-send="true">www.re-wrenches.org/etiquette.htm</A><BR><BR>Check
out participant bios:<BR><A href="http://www.members.re-wrenches.org"
target=_blank
moz-do-not-send="true">www.members.re-wrenches.org</A><BR><BR></P></DIV>
<P class=MsoNormal> </P></DIV></DIV></DIV>
<P class=MsoNormal
style="MARGIN-BOTTOM: 12pt"><BR>_______________________________________________<BR>List
sponsored by Home Power magazine<BR><BR>List Address: <A
href="mailto:RE-wrenches@lists.re-wrenches.org" target=_blank
moz-do-not-send="true">RE-wrenches@lists.re-wrenches.org</A><BR><BR>Change
email address & settings:<BR><A
href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org"
target=_blank
moz-do-not-send="true">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</A><BR><BR>List-Archive:
<A
href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org"
target=_blank
moz-do-not-send="true">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</A><BR><BR>List
rules & etiquette:<BR><A
href="http://www.re-wrenches.org/etiquette.htm" target=_blank
moz-do-not-send="true">www.re-wrenches.org/etiquette.htm</A><BR><BR>Check
out participant bios:<BR><A href="http://www.members.re-wrenches.org"
target=_blank
moz-do-not-send="true">www.members.re-wrenches.org</A><BR><BR></P></DIV>
<P class=MsoNormal> </P></DIV></DIV></DIV></DIV>
<P class=MsoNormal style="MARGIN-BOTTOM: 12pt"><BR><SPAN
class="">_______________________________________________<BR>List
sponsored by Redwood Alliance<BR><BR>List Address: <A
href="mailto:RE-wrenches@lists.re-wrenches.org" target=_blank
moz-do-not-send="true">RE-wrenches@lists.re-wrenches.org</A><BR><BR></SPAN>Change
listserver email address & settings:<BR><A
href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org"
target=_blank
moz-do-not-send="true">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</A><BR><BR>List-Archive:
<A
href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html"
target=_blank
moz-do-not-send="true">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</A><SPAN
class=""><BR><BR>List rules & etiquette:<BR><A
href="http://www.re-wrenches.org/etiquette.htm" target=_blank
moz-do-not-send="true">www.re-wrenches.org/etiquette.htm</A><BR><BR></SPAN><SPAN
class="">Check out or update participant bios:<BR><A
href="http://www.members.re-wrenches.org" target=_blank
moz-do-not-send="true">www.members.re-wrenches.org</A><BR><BR></SPAN></P></DIV>
<P
class=MsoNormal> </P></DIV></DIV></DIV></DIV><BR>_______________________________________________<BR>List
sponsored by Redwood Alliance<BR><BR>List Address: <A
href="mailto:RE-wrenches@lists.re-wrenches.org"
moz-do-not-send="true">RE-wrenches@lists.re-wrenches.org</A><BR><BR>Change
listserver email address & settings:<BR><A
href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org"
target=_blank rel=noreferrer
moz-do-not-send="true">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</A><BR><BR>List-Archive:
<A
href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html"
target=_blank rel=noreferrer
moz-do-not-send="true">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</A><BR><BR>List
rules & etiquette:<BR><A
href="http://www.re-wrenches.org/etiquette.htm" target=_blank
rel=noreferrer
moz-do-not-send="true">www.re-wrenches.org/etiquette.htm</A><BR><BR>Check
out or update participant bios:<BR><A
href="http://www.members.re-wrenches.org" target=_blank rel=noreferrer
moz-do-not-send="true">www.members.re-wrenches.org</A><BR><BR><BR></BLOCKQUOTE></DIV><BR></DIV><BR>
<FIELDSET class=mimeAttachmentHeader></FIELDSET> <BR><PRE wrap="">_______________________________________________
List sponsored by Redwood Alliance
List Address: <A class=moz-txt-link-abbreviated href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</A>
Change listserver email address & settings:
<A class=moz-txt-link-freetext href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</A>
List-Archive: <A class=moz-txt-link-freetext href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</A>
List rules & etiquette:
<A class=moz-txt-link-abbreviated href="http://www.re-wrenches.org/etiquette.htm">www.re-wrenches.org/etiquette.htm</A>
Check out or update participant bios:
<A class=moz-txt-link-abbreviated href="http://www.members.re-wrenches.org">www.members.re-wrenches.org</A>
</PRE></BLOCKQUOTE><BR></DIV></BLOCKQUOTE>
<BLOCKQUOTE type="cite">
<DIV><SPAN>_______________________________________________</SPAN><BR><SPAN>List
sponsored by Redwood Alliance</SPAN><BR><SPAN></SPAN><BR><SPAN>List Address:
<A
href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</A></SPAN><BR><SPAN></SPAN><BR><SPAN>Change
listserver email address & settings:</SPAN><BR><SPAN><A
href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</A></SPAN><BR><SPAN></SPAN><BR><SPAN>List-Archive:
<A
href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</A></SPAN><BR><SPAN></SPAN><BR><SPAN>List
rules & etiquette:</SPAN><BR><SPAN><A
href="http://www.re-wrenches.org/etiquette.htm">www.re-wrenches.org/etiquette.htm</A></SPAN><BR><SPAN></SPAN><BR><SPAN>Check
out or update participant bios:</SPAN><BR><SPAN><A
href="http://www.members.re-wrenches.org">www.members.re-wrenches.org</A></SPAN><BR><SPAN></SPAN><BR></DIV></BLOCKQUOTE>
<P>
<HR>
<P></P>_______________________________________________<BR>List sponsored by
Redwood Alliance<BR><BR>List Address:
RE-wrenches@lists.re-wrenches.org<BR><BR>Change listserver email address &
settings:<BR>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org<BR><BR>List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html<BR><BR>List
rules & etiquette:<BR>www.re-wrenches.org/etiquette.htm<BR><BR>Check out
or update participant
bios:<BR>www.members.re-wrenches.org<BR><BR></BLOCKQUOTE></BODY></HTML>