<p dir="ltr">Loctite makes anti seize in aerosol cans. Not necessarily less messy but certainly less tedious if all bolts are prepped on the ground and carried up in a bucket for assembly. </p>
<p dir="ltr">Roy Rakobitsch<br>
NABCEP Certified Small Wind Installer®<br>
NABCEP Certified Solar PV Installer®<br>
Certified Advanced Tower Climbing, Safety & Rescue<br>
Wind/PV Design Engineer<br>
Windsine LLC<br>
631-514-4166<br>
<a href="http://www.windsine.org">www.windsine.org</a></p>
<div class="gmail_quote">On Jun 29, 2015 12:32 PM, "Ray Walters" <<a href="mailto:ray@solarray.com">ray@solarray.com</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div bgcolor="#FFFFFF" text="#000000">
Anti seize also comes in larger cans with a brush, but it still can
get messy.<br>
Also on the torque issue, I found just using the T handle hex
wrench from the manufacturer (we use S Flex) gets the torque where
it should be, and even a gorilla can't over torque it too far.<br>
Old fashioned, but we have less heavy tools to carry on the roof,
and no over torque issues. With lubed threads, the T handle wrench
can twirl, which is almost as fast as using a power tool.<br>
<pre cols="72">R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
<a href="tel:303%20505-8760" value="+13035058760" target="_blank">303 505-8760</a></pre>
<div>On 6/29/2015 11:12 AM, Allan Sindelar
wrote:<br>
</div>
<blockquote type="cite">
Kurt,<br>
Less messy, yes; less tedious, maybe: anti-seize also comes in a
semi-solid stick form, like a large lip balm tube with a cap and a
twist dial on the bottom to raise the level of the anti-seize as
it's used. One quick rub on the threads per bolt. Purchased
through Fastenal.<br>
Allan<br>
<br>
<div>
<div>
<p class="MsoNormal"><b>Allan Sindelar</b><br>
<span style="font-size:10.0pt"><a href="mailto:allan@sindelarsolar.com" target="_blank">allan@sindelarsolar.com</a></span><br>
<span style="font-size:10.0pt">NABCEP Certified PV
Installation Professional<br>
NABCEP Certified Technical Sales Professional<br>
New Mexico EE98J Journeyman Electrician<br>
Founder (Retired), <span>Positive Energy, Inc.</span><br>
<b><a href="tel:505%20780-2738" value="+15057802738" target="_blank">505 780-2738</a> cell</b><br>
<br>
<b><u></u><u></u></b></span></p>
<p class="MsoNormal"><u></u> <u></u></p>
</div>
</div>
<div>On 6/29/2015 11:05 AM, Kurt Johnsen
wrote:<br>
</div>
<blockquote type="cite">
<div dir="ltr">
<div>Esteemed Wrenches, <br>
Does anyone know of a less tedious and messy way to lube the
bolts than squeeze tube anti-seize? <br>
<br>
My 2 cents; I believe that the torque specs for an
engineered assembly are put in there for a reason. Ignoring
them puts the installer on the hook for any failures. Aside
from being the right thing to do, using torque wrenches
helps avoid assuming unnecessary financial risk which my
thin margins cannot afford. <br>
<br>
</div>
Kurt Johnsen<br>
</div>
<div class="gmail_extra"><br>
<div class="gmail_quote">On Sun, Jun 28, 2015 at 5:27 PM, Ray
Walters <span dir="ltr"><<a href="mailto:ray@solarray.com" target="_blank">ray@solarray.com</a>></span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div bgcolor="#FFFFFF" text="#000000"> Besides your note
that cordless impact drivers can over torque the clamps,
also they spin the bolts too fast which can lead to
spalling of the SS hardware.<br>
We now hand torque those connects. Finally, most torque
specs are for lubricated bolts. We use anti-seize on
the threads before torquing.<br>
Using a cordless impact driver and no lube can cause not
only module damage but also clamp damage, and end up
with clamps not actually securing the modules, because
the bolts spalled out before fully clamping.<br>
<pre cols="72">R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
<a href="tel:303%20505-8760" value="+13035058760" target="_blank">303 505-8760</a></pre>
<div>
<div>
<div>On 6/28/2015 3:06 PM, Benn Kilburn wrote:<br>
</div>
<blockquote type="cite">
<div dir="ltr">
<div class="gmail_default" style="font-family:trebuchet ms,sans-serif">Chris,<br>
</div>
<div class="gmail_default" style="font-family:trebuchet ms,sans-serif">It
sounds (to me) that you are describing the
bonding "tooth" dug through the aluminum frame
and into the glass? or at least compressed the
frame enough to break the glass? If that is
the case then i'm betting that the clamp bolt
was way over-torqued.<br>
<br>
You need to check the recommended tightening
torque for the module and for the racking
system you are using. For example, what we
are using these days, Kinetic, the tightening
torque for mid and end clamps is 12 ft-lb and
here are some recommended clamping <span>torques</span>
from some different module mfgrs....<br>
<div class="gmail_default" style="font-family:trebuchet ms,sans-serif">Conergy
8 NM - 6 ft-lb<br>
</div>
<div class="gmail_default" style="font-family:trebuchet ms,sans-serif">Hanwha
5 NM - 3.7 ft-lb<br>
</div>
<div class="gmail_default" style="font-family:trebuchet ms,sans-serif">JA
Solar 18-24 NM - 13-18 ft-lb<br>
</div>
These likely vary based on the construction of
the module frame.<br>
I've also found that some module mfgrs do not
list recommended <span>tightening</span> <span>torques</span>
in their install manuals, so best to use
discretion.<br>
<br>
We had a module break after clamping it down.
The crew described it as 'putting the module
in place, clamping it down and turning around
to grab the next module and hearing a 'crack'
followed by the crackling glass sound (if you
have ever heard a module break, the crackling
sound can last for a few minutes). The break
pattern in the glass seemed to focus on a
particular mid clamp. I used a torque wrench,
set at around 10 ft-lb and checked all the
mid-clamp bolts, increasing the torque setting
by a few ft-lb each time until it finally
turned a bolt instead of clicking. I found
that most of the bolts were close to 30 ft-lb
and the one that appeared to break the glass
was about 34 ft-lb.<br>
</div>
<div class="gmail_default" style="font-family:trebuchet ms,sans-serif">Suffice
to say, we were getting carried away with
tightening using cordless impact drivers. <br>
</div>
<div class="gmail_default" style="font-family:trebuchet ms,sans-serif">At
that point i and the rest of the crew started
using the torque wrench as we were going along
until we had a better feel for what was the
proper torque. (i've done this before, but it
is something that needs to be self
"re-calibrated" often. <br>
</div>
<div class="gmail_default" style="font-family:trebuchet ms,sans-serif"><br>
</div>
</div>
<div class="gmail_extra"><br clear="all">
<div>
<div>
<div style="text-align:left"><strong style="margin:0px;padding:0px">Benn
Kilburn <span style="font-size:9px"></span></strong></div>
<div style="text-align:left">CSA Certified
Solar Photovoltaic Systems Electrician,
SkyFire Energy Inc</div>
<div style="text-align:left">6706 – 82 Ave
NW | Edmonton, AB | T6B 0E7</div>
<div style="text-align:left">P: <a href="tel:780-474-8992" value="+17804748992" target="_blank">780-474-8992</a>
| F: <a href="tel:888-405-5843" value="+18884055843" target="_blank">888-405-5843</a> | <a href="http://www.skyfireenergy.com/" style="margin:0px;padding:0px;color:rgb(240,140,0);text-decoration:none;border-width:0px;border-style:none" target="_blank">www.skyfireenergy.com</a></div>
<a href="mailto:benn@skyfireenergy.com" style="margin:0px;padding:0px;color:rgb(240,140,0);text-decoration:none;border-width:0px;border-style:none" target="_blank"><img alt="email" src="http://www.skyfireenergy.com/wp-content/uploads/2014/08/email.png" style="margin:0px;padding:0px;border-width:0px;border-style:none" height="25" width="25"></a> <a href="https://www.facebook.com/SkyFireEnergy" style="margin:0px;padding:0px;color:rgb(240,140,0);text-decoration:none;border-width:0px;border-style:none" target="_blank"><img alt="facebook" src="http://www.skyfireenergy.com/wp-content/uploads/2014/08/facebook.png" style="margin:0px;padding:0px;border-width:0px;border-style:none" height="25" width="25"></a> <a href="https://twitter.com/SkyFireEnergy" style="margin:0px;padding:0px;color:rgb(240,140,0);text-decoration:none;border-width:0px;border-style:none" target="_blank"><img alt="twitter" src="http://www.skyfireenergy.com/wp-content/uploads/2014/08/twitter.png" style="margin:0px;padding:0px;border-width:0px;border-style:none" height="25" width="25"></a> <a href="https://www.linkedin.com/company/283735?trk=tyah&trkInfo=tarId%3A1408655033432%2Ctas%3Askyfire%2Cidx%3A2-2-5" style="margin:0px;padding:0px;color:rgb(240,140,0);text-decoration:none;border-width:0px;border-style:none" target="_blank"><img alt="linkedin" src="http://www.skyfireenergy.com/wp-content/uploads/2014/08/linkedin.png" style="margin:0px;padding:0px;border-width:0px;border-style:none" height="25" width="25"></a> <a href="https://plus.google.com/+SkyFireEnergy/" style="margin:0px;padding:0px;color:rgb(240,140,0);text-decoration:none;border-width:0px;border-style:none" target="_blank"><img alt="google" src="http://www.skyfireenergy.com/wp-content/uploads/2014/08/google.png" style="margin:0px;padding:0px;border-width:0px;border-style:none" height="25" width="25"></a>
<p style="font-size:13px;margin:0px;padding:1em 0px;text-align:justify;color:rgb(0,0,0);font-family:helvetica,sans-serif;line-height:18px">
<img alt="SkyFire
Energy Logo_horizontal" src="http://www.skyfireenergy.com/wp-content/uploads/2014/07/SkyFire-Energy-Logo_horizontal.png" style="margin:0px;padding:0px;border-width:0px;border-style:none" height="47" width="179"></p>
</div>
</div>
<br>
<div class="gmail_quote">On Thu, Jun 25, 2015 at
5:11 PM, Chris Worcester <span dir="ltr"><<a href="mailto:chris@solarwindworks.com" target="_blank">chris@solarwindworks.com</a>></span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div link="blue" vlink="purple" lang="EN-US">
<div>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Hi
Jason,</span></p>
<p class="MsoNormal" style="text-autospace:none"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Have
you or others been using the new
UniRac SM mid and end clamps with
the integrated bonding yet? My
concern is the “</span><span style="font-size:10.0pt;font-family:"PTSans-Regular","sans-serif"">Stainless
steel Midclamp points, 2 per module,
pierce module frame anodization to
bond module to module through
clamp.”</span><span style="font-size:10.0pt;font-family:"Calibri","sans-serif";color:#1f497d"></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">We
had an MSI Alpha + self-bonding
midclamp shatter the glass on an LG
280 last fall, as the factory set
point was sticking out too far, so
as it was being tightened down, on
top of the module the point dug
through the module’s top frame
hitting the glass, shattering it.</span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">I
do wonder if there are any issues
with this “point” on the UniRac
midclamps potential for doing the
same damage?</span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Chris
Worcester</span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Solar
Wind Works</span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">NABCEP
Certified PV Installer</span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Office
<a href="tel:530-582-4503" value="+15305824503" target="_blank">530-582-4503</a></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Cell
<a href="tel:530-448-9692" value="+15304489692" target="_blank">530-448-9692</a></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Fax
<a href="tel:530-582-4603" value="+15305824603" target="_blank">530-582-4603</a></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><a href="http://www.solarwindworks.com" target="_blank">www.solarwindworks.com</a></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><a href="mailto:chris@solarwindworks.com" target="_blank">chris@solarwindworks.com</a></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span></p>
<p class="MsoNormal"><b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">From:</span></b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">
RE-wrenches [mailto:<a href="mailto:re-wrenches-bounces@lists.re-wrenches.org" target="_blank">re-wrenches-bounces@lists.re-wrenches.org</a>]
<b>On Behalf Of </b>Jason
Szumlanski<br>
<b>Sent:</b> Thursday, June 25, 2015
1:13 PM<span><br>
<b>To:</b> RE-wrenches<br>
<b>Subject:</b> Re: [RE-wrenches]
SnapNrack</span></span></p>
<p class="MsoNormal"> </p>
<div>
<p class="MsoNormal">That decision was
based on our distribution network
offering better pricing on Unirac,
and engineers being comfortable with
it. Now with the integrated
grounding from Unirac, I can't see
moving away from it again barring a
significant cost benefit. It also
stacks and stocks easier than the
Ironridge rails.</p>
<div>
<p class="MsoNormal"><br clear="all">
</p>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<p class="MsoNormal"> </p>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
<p class="MsoNormal"> </p>
<div>
<div>
<div>
<p class="MsoNormal">On Wed,
Jun 24, 2015 at 5:55 PM,
Dana Brandt <<a href="mailto:dana@ecotechenergy.com" target="_blank">dana@ecotechenergy.com</a>>
wrote:</p>
<div>
<div>
<div>
<p class="MsoNormal" style="margin-bottom:12.0pt">Hi
Jason,</p>
</div>
<p class="MsoNormal" style="margin-bottom:12.0pt">We've
used Unirac for years
but have been
contemplating Ironridge.
I'm curious what your
experience was and why
you went back to Unirac?
<br>
<br>
Anyone else have input
on best racking systems
for flush-mounted
residential systems on
comp roof? </p>
</div>
<p class="MsoNormal">Thanks,</p>
<div>
<p class="MsoNormal"><br clear="all">
</p>
<div>
<div>
<div>
<p class="MsoNormal">Dana<br>
<br>
Dana Brandt<br>
Ecotech Energy
Systems, LLC<br>
<a href="http://www.ecotechenergy.com" target="_blank">www.ecotechenergy.com</a><br>
<a href="mailto:dana@ecotechenergy.com" target="_blank">dana@ecotechenergy.com</a><br>
<a href="tel:360.318.7646" target="_blank">360.318.7646</a></p>
</div>
</div>
</div>
<p class="MsoNormal"> </p>
<div>
<p class="MsoNormal">On
Wed, Feb 5, 2014 at
12:09 PM, Jason
Szumlanski <<a href="mailto:jason@fafcosolar.com" target="_blank">jason@fafcosolar.com</a>>
wrote:</p>
<div>
<div>
<p class="MsoNormal"><span style="font-family:"Verdana","sans-serif"">By Snap N
Rack, you mean
Sun Run...</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-family:"Verdana","sans-serif""> </span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-family:"Verdana","sans-serif""><a href="http://cleantechnica.com/2014/02/05/sunrun-acquires-rec-solars-residential-business-aee-solar-snapnrack-means/" target="_blank">http://cleantechnica.com/2014/02/05/sunrun-acquires-rec-solars-residential-business-aee-solar-snapnrack-means/</a></span></p>
</div>
<div>
<p class="MsoNormal"> </p>
</div>
<div>
<p class="MsoNormal"><span style="font-family:"Verdana","sans-serif"">I'm
curious if these
vertical
integrators will
still make their
acquired brands
available to
small dealers
through
distribution.
When SolarCity
snatched up Zep,
I had concerns
about being able
to service or
add onto
existing Zep
systems we
installed.
That's
definitely a
concern going
forward, and
reason to
perhaps stick
with the most
compatible
racking
solutions
available. We
used IronRidge
for a while,
which is largely
compatible with
Unirac, but now
we're back on
the Unirac
bandwagon. </span></p>
</div>
<div>
<p class="MsoNormal"> </p>
</div>
<div>
<p class="MsoNormal"><span style="font-family:"Verdana","sans-serif"">Interesting
times...</span></p>
</div>
<p class="MsoNormal" style="margin-bottom:12.0pt"> </p>
<div>
<div>
<div style="margin-bottom:6.0pt">
<p style="margin:0in;margin-bottom:.0001pt"><span style="font-size:10.0pt;font-family:"Verdana","sans-serif"">Jason
Szumlanski</span></p>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif""></span><span style="font-size:10.0pt;font-family:"Verdana","sans-serif"">Fafco
Solar</span><span style="font-size:10.0pt;font-family:"Arial","sans-serif""></span><span style="font-size:10.0pt;font-family:"Verdana","sans-serif""></span></p>
</div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Verdana","sans-serif""> </span></p>
</div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Verdana","sans-serif""><img src="https://wisestamp.appspot.com/pixview.gif?p=chrome&v=3.31.0&t=1391630669252&u=ce9344a8140ce271" border="0" height="1" width="1"></span></p>
</div>
</div>
</div>
<div>
<div>
<div>
<p class="MsoNormal" style="margin-bottom:12.0pt"> </p>
<div>
<p class="MsoNormal">On
Wed, Feb 5,
2014 at 12:45
PM, Max
Balchowsky
<<a href="mailto:max@seesolar.com" target="_blank">max@seesolar.com</a>>
wrote:</p>
<div>
<div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">We
have been
using Snap N'
Rack for a
while, Have
lots of
installs in
Hawaii - so
far no
problems, I
like the
convenience of
the design for
snapping in
the slider nut
in mid rail,
and also the
ability to
install the
panels flush
with the end
of the rails….</span></p>
</div>
<div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif""> </span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">Max
Balchowsky<br>
Design
Engineer<br>
SEE Systems<br>
1048 Irvine
Ave Suite 217<br>
Newport Beach,
Ca. 92660<br>
<a href="tel:760-403-6810" target="_blank">760-403-6810</a></span><span style="font-size:10.0pt;font-family:"Arial","sans-serif""></span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:7.5pt;font-family:"Tahoma","sans-serif"">"Building
a Better
Future For The
Next
Generation"</span><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif""></span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif""> </span></p>
</div>
</div>
<div>
<div>
<div>
<div class="MsoNormal" style="text-align:center" align="center">
<hr align="center" size="1" width="100%"></div>
<p class="MsoNormal"><b><span style="font-family:"Arial","sans-serif"">From:</span></b><span style="font-family:"Arial","sans-serif""> Allen
Frishman <<a href="mailto:amfrish@aeonsolar.com" target="_blank">amfrish@aeonsolar.com</a>><br>
<b>To:</b>
RE-wrenches
<<a href="mailto:re-wrenches@lists.re-wrenches.org" target="_blank">re-wrenches@lists.re-wrenches.org</a>>
<br>
<b>Sent:</b>
Wednesday,
February 5,
2014 6:17 AM<br>
<b>Subject:</b>
Re:
[RE-wrenches]
SnapNrack</span></p>
</div>
<div>
<div>
<div>
<p class="MsoNormal"> </p>
<div>
<div>
<p class="MsoNormal">I
am curious
about the mid
clamps on the
snapnrack.
The flange
that rests on
top of the
solar panel
frame is so
small ~ 3/16".
Anyone
experience any
problems with
these failing
in a big
storm? With
solar panel
frames not
being square
it is nice to
have a little
extra to grab
- I am always
curious as to
why these
clips are made
with such a
small area to
hold the
panels down.
</p>
<div>
<p class="MsoNormal"> </p>
</div>
<div>
<p class="MsoNormal">All
feedback on
these clips is
appreciated.</p>
<div>
<div>
<div>
<p class="MsoNormal"><i><span style="font-size:10.5pt;font-family:"Helvetica","sans-serif"">Al
Frishman</span></i><span style="font-size:13.5pt;font-family:"Helvetica","sans-serif""><br>
<span style="color:#030100">Aeon</span><span style="color:#ff9700">Solar</span></span></p>
</div>
<div>
<p class="MsoNormal"><i><span style="font-size:10.5pt;font-family:"Helvetica","sans-serif""><a href="tel:%28917%29%20699-6641" value="+19176996641" target="_blank">(917) 699-6641</a> - cell</span></i><span style="font-size:10.5pt;font-family:"Helvetica","sans-serif""><br>
<i><a href="tel:%28888%29%20460-2867" value="+18884602867" target="_blank">(888)
460-2867</a></i><br>
<i><a href="http://www.aeonsolar.com/" target="_blank">www.aeonsolar.com</a></i></span><span style="font-size:13.5pt;font-family:"Helvetica","sans-serif""></span></p>
</div>
</div>
</div>
<p class="MsoNormal"> </p>
<div>
<div>
<p class="MsoNormal">On
Jun 1, 2013,
at 10:41 AM,
Max Balchowsky
wrote:</p>
</div>
<p class="MsoNormal"><br>
<br>
</p>
<div>
<div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">Have
installed last
three systems
(35Kw)with
snap n rack.</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">love
it....</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif""> </span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">Max
Balchowsky<br>
Design
Engineer<br>
SEE Systems</span><span style="font-size:10.0pt;font-family:"Arial","sans-serif""><br>
</span><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">1048
Irvine Ave
Suite 217<br>
Newport Beach,
Ca. 92660<br>
<a href="tel:760-403-6810" target="_blank">760-403-6810</a></span><span style="font-size:10.0pt;font-family:"Arial","sans-serif""></span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:7.5pt;font-family:"Tahoma","sans-serif"">"Building
a Better
Future For The
Next
Generation"</span><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif""></span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif""> </span></p>
</div>
<div>
<div>
<div>
<div class="MsoNormal" style="text-align:center" align="center">
<hr align="center" size="1" width="100%"></div>
<p class="MsoNormal"><b><span style="font-family:"Arial","sans-serif"">From:</span></b><span style="font-family:"Arial","sans-serif""> Solarguy
<<a href="mailto:ntrei@1scom.net" target="_blank">ntrei@1scom.net</a>><br>
<b>To:</b>
'RE-wrenches'
<<a href="mailto:re-wrenches@lists.re-wrenches.org" target="_blank">re-wrenches@lists.re-wrenches.org</a>>
<br>
<b>Sent:</b>
Friday, May
31, 2013 10:11
PM<br>
<b>Subject:</b>
Re:
[RE-wrenches]
SnapNrack</span></p>
</div>
<div>
<p class="MsoNormal"> </p>
<div>
<div>
<div>
<div>
<p class="MsoNormal"><span style="font-size:14.0pt">The only complaint with the Snapnrack rails is
the thin wall
can easily be
distorted.
This will
allow the nut
to drop out of
its groove.
Love the
universal end
clamps but
have learned
to assemble
every one to
check for
proper fit
before getting
on the roof.</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:14.0pt">Jim Duncan</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:14.0pt">-----Original Message-----<br>
From: <a href="mailto:re-wrenches-bounces@lists.re-wrenches.org" target="_blank">re-wrenches-bounces@lists.re-wrenches.org</a>
[mailto:<a href="mailto:re-wrenches-bounces@lists.re-wrenches.org" target="_blank">re-wrenches-bounces@lists.re-wrenches.org</a>]
On Behalf Of
Drake<br>
Sent: Friday,
May 31, 2013
7:32 PM</span><br>
To: <a href="mailto:re-wrenches@lists.re-wrenches.org" target="_blank">re-wrenches@lists.re-wrenches.org</a><br>
Subject:
[RE-wrenches]
SnapNrack</p>
</div>
<div>
<p class="MsoNormal"> </p>
</div>
<div>
<p class="MsoNormal">Hello
Wrenches,</p>
</div>
<div>
<p class="MsoNormal"> </p>
</div>
<div>
<p class="MsoNormal">How
would you rate
the SnapNrack
mounting
systems
against Unirac
and other
mounting
systems?</p>
</div>
<div>
<p class="MsoNormal"> </p>
</div>
<div>
<p class="MsoNormal">Thanks,</p>
</div>
<div>
<p class="MsoNormal"> </p>
</div>
<div>
<p class="MsoNormal">Drake</p>
</div>
<div>
<p class="MsoNormal"> </p>
</div>
<div>
<p class="MsoNormal">_______________________________________________</p>
</div>
<div>
<p class="MsoNormal">List
sponsored by
Home Power
magazine</p>
</div>
<div>
<p class="MsoNormal"> </p>
</div>
<div>
<p class="MsoNormal">List
Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank"><span style="color:windowtext;text-decoration:none">RE-wrenches@lists.re-wrenches.org</span></a></p>
</div>
<div>
<p class="MsoNormal"> </p>
</div>
<div>
<p class="MsoNormal">Change
email address
&
settings:</p>
</div>
<div>
<p class="MsoNormal"><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank"><span style="color:windowtext;text-decoration:none">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</span></a></p>
</div>
<div>
<p class="MsoNormal"> </p>
</div>
<div>
<p class="MsoNormal">List-Archive:
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank"><span style="color:windowtext;text-decoration:none">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</span></a></p>
</div>
<div>
<p class="MsoNormal"> </p>
</div>
<div>
<p class="MsoNormal">List
rules &
etiquette:</p>
</div>
<div>
<p class="MsoNormal"><a href="http://www.re-wrenches.org/etiquette.htm" target="_blank"><span style="color:windowtext;text-decoration:none">www.re-wrenches.org/etiquette.htm</span></a></p>
</div>
<div>
<p class="MsoNormal"> </p>
</div>
<div>
<p class="MsoNormal">Check
out
participant
bios:</p>
</div>
<div>
<p class="MsoNormal"><a href="http://www.members.re-wrenches.org/" target="_blank"><span style="color:windowtext;text-decoration:none">www.members.re-wrenches.org</span></a></p>
</div>
</div>
</div>
</div>
<p class="MsoNormal" style="margin-bottom:12.0pt"><br>
_______________________________________________<br>
List sponsored
by Home Power
magazine<br>
<br>
List Address:
<a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change email
address &
settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive:
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules
&
etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out
participant
bios:<br>
<a href="http://www.members.re-wrenches.org/" target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br>
</p>
</div>
</div>
</div>
<div>
<div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">Preferences</span></p>
</div>
</div>
<div>
<div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">§</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">1</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">2</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">3</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">4</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">5</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">6</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">7</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">8</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">9</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">0</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">-</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">=</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">Backspace</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">Tab</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">q</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">w</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">e</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">r</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">t</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">y</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">u</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">i</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">o</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">p</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">[</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">]</span></p>
</div>
<div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">Return</span></p>
</div>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">capslock</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">a</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:10.0pt;font-family:"Arial","sans-serif"">s</span></p>
</div>
</div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></div></blockquote></div></div></blockquote></div></div></div></blockquote></div></div></blockquote></blockquote></div><br>_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" rel="noreferrer" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" rel="noreferrer" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" rel="noreferrer" target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br>...</blockquote></div>