<html>
<head>
<meta content="text/html; charset=UTF-8" http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Besides your note that cordless impact drivers can over torque the
clamps, also they spin the bolts too fast which can lead to spalling
of the SS hardware.<br>
We now hand torque those connects. Finally, most torque specs are
for lubricated bolts. We use anti-seize on the threads before
torquing.<br>
Using a cordless impact driver and no lube can cause not only module
damage but also clamp damage, and end up with clamps not actually
securing the modules, because the bolts spalled out before fully
clamping.<br>
<pre class="moz-signature" cols="72">R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760</pre>
<div class="moz-cite-prefix">On 6/28/2015 3:06 PM, Benn Kilburn
wrote:<br>
</div>
<blockquote
cite="mid:CAER8s1a3d2hE23xr8pOYu=t0OdnsL=s_RBdtLq2YpoD=LEigKQ@mail.gmail.com"
type="cite">
<div dir="ltr">
<div class="gmail_default" style="font-family:trebuchet
ms,sans-serif">Chris,<br>
</div>
<div class="gmail_default" style="font-family:trebuchet
ms,sans-serif">It sounds (to me) that you are describing the
bonding "tooth" dug through the aluminum frame and into the
glass? or at least compressed the frame enough to break the
glass? If that is the case then i'm betting that the clamp
bolt was way over-torqued.<br>
<br>
You need to check the recommended tightening torque for the
module and for the racking system you are using. For example,
what we are using these days, Kinetic, the tightening torque
for mid and end clamps is 12 ft-lb and here are some
recommended clamping <span class="">torques</span> from some
different module mfgrs....<br>
<div class="gmail_default" style="font-family:trebuchet
ms,sans-serif">Conergy 8 NM - 6 ft-lb<br>
</div>
<div class="gmail_default" style="font-family:trebuchet
ms,sans-serif">Hanwha 5 NM - 3.7 ft-lb<br>
</div>
<div class="gmail_default" style="font-family:trebuchet
ms,sans-serif">JA Solar 18-24 NM - 13-18 ft-lb<br>
</div>
These likely vary based on the construction of the module
frame.<br>
I've also found that some module mfgrs do not list recommended
<span class="">tightening</span> <span class="">torques</span>
in their install manuals, so best to use discretion.<br>
<br>
We had a module break after clamping it down. The crew
described it as 'putting the module in place, clamping it down
and turning around to grab the next module and hearing a
'crack' followed by the crackling glass sound (if you have
ever heard a module break, the crackling sound can last for a
few minutes). The break pattern in the glass seemed to focus
on a particular mid clamp. I used a torque wrench, set at
around 10 ft-lb and checked all the mid-clamp bolts,
increasing the torque setting by a few ft-lb each time until
it finally turned a bolt instead of clicking. I found that
most of the bolts were close to 30 ft-lb and the one that
appeared to break the glass was about 34 ft-lb.<br>
</div>
<div class="gmail_default" style="font-family:trebuchet
ms,sans-serif">Suffice to say, we were getting carried away
with tightening using cordless impact drivers. <br>
</div>
<div class="gmail_default" style="font-family:trebuchet
ms,sans-serif">At that point i and the rest of the crew
started using the torque wrench as we were going along until
we had a better feel for what was the proper torque. (i've
done this before, but it is something that needs to be self
"re-calibrated" often. <br>
</div>
<div class="gmail_default" style="font-family:trebuchet
ms,sans-serif"><br>
</div>
</div>
<div class="gmail_extra"><br clear="all">
<div>
<div class="gmail_signature">
<div style="text-align:left"><strong
style="margin:0px;padding:0px">Benn Kilburn <span
style="font-size:9px"></span></strong></div>
<div style="text-align:left">CSA Certified Solar
Photovoltaic Systems Electrician, SkyFire Energy Inc</div>
<div style="text-align:left">6706 – 82 Ave NW | Edmonton, AB
| T6B 0E7</div>
<div style="text-align:left">P: 780-474-8992 | F:
888-405-5843 | <a moz-do-not-send="true"
href="http://www.skyfireenergy.com/"
style="margin:0px;padding:0px;color:rgb(240,140,0);text-decoration:none;border-width:0px;border-style:none"
target="_blank">www.skyfireenergy.com</a></div>
<a moz-do-not-send="true"
href="mailto:benn@skyfireenergy.com"
style="margin:0px;padding:0px;color:rgb(240,140,0);text-decoration:none;border-width:0px;border-style:none"
target="_blank"><img moz-do-not-send="true" alt="email"
src="http://www.skyfireenergy.com/wp-content/uploads/2014/08/email.png"
style="margin:0px;padding:0px;border-width:0px;border-style:none"
height="25" width="25"></a> <a moz-do-not-send="true"
href="https://www.facebook.com/SkyFireEnergy"
style="margin:0px;padding:0px;color:rgb(240,140,0);text-decoration:none;border-width:0px;border-style:none"
target="_blank"><img moz-do-not-send="true" alt="facebook"
src="http://www.skyfireenergy.com/wp-content/uploads/2014/08/facebook.png"
style="margin:0px;padding:0px;border-width:0px;border-style:none"
height="25" width="25"></a> <a moz-do-not-send="true"
href="https://twitter.com/SkyFireEnergy"
style="margin:0px;padding:0px;color:rgb(240,140,0);text-decoration:none;border-width:0px;border-style:none"
target="_blank"><img moz-do-not-send="true" alt="twitter"
src="http://www.skyfireenergy.com/wp-content/uploads/2014/08/twitter.png"
style="margin:0px;padding:0px;border-width:0px;border-style:none"
height="25" width="25"></a> <a moz-do-not-send="true"
href="https://www.linkedin.com/company/283735?trk=tyah&trkInfo=tarId%3A1408655033432%2Ctas%3Askyfire%2Cidx%3A2-2-5"
style="margin:0px;padding:0px;color:rgb(240,140,0);text-decoration:none;border-width:0px;border-style:none"
target="_blank"><img moz-do-not-send="true" alt="linkedin"
src="http://www.skyfireenergy.com/wp-content/uploads/2014/08/linkedin.png"
style="margin:0px;padding:0px;border-width:0px;border-style:none"
height="25" width="25"></a> <a moz-do-not-send="true"
href="https://plus.google.com/+SkyFireEnergy/"
style="margin:0px;padding:0px;color:rgb(240,140,0);text-decoration:none;border-width:0px;border-style:none"
target="_blank"><img moz-do-not-send="true" alt="google"
src="http://www.skyfireenergy.com/wp-content/uploads/2014/08/google.png"
style="margin:0px;padding:0px;border-width:0px;border-style:none"
height="25" width="25"></a>
<p style="font-size:13px;margin:0px;padding:1em
0px;text-align:justify;color:rgb(0,0,0);font-family:helvetica,sans-serif;line-height:18px">
<img moz-do-not-send="true" alt="SkyFire Energy
Logo_horizontal"
src="http://www.skyfireenergy.com/wp-content/uploads/2014/07/SkyFire-Energy-Logo_horizontal.png"
style="margin:0px;padding:0px;border-width:0px;border-style:none"
height="47" width="179"></p>
</div>
</div>
<br>
<div class="gmail_quote">On Thu, Jun 25, 2015 at 5:11 PM, Chris
Worcester <span dir="ltr"><<a moz-do-not-send="true"
href="mailto:chris@solarwindworks.com" target="_blank">chris@solarwindworks.com</a>></span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div link="blue" vlink="purple" lang="EN-US">
<div>
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Hi
Jason,</span></p>
<p class="MsoNormal" style="text-autospace:none"><span
style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Have
you or others been using the new UniRac SM mid and
end clamps with the integrated bonding yet? My
concern is the “</span><span
style="font-size:10.0pt;font-family:"PTSans-Regular","sans-serif"">Stainless
steel Midclamp points, 2 per module, pierce module
frame anodization to bond module to module through
clamp.”</span><span
style="font-size:10.0pt;font-family:"Calibri","sans-serif";color:#1f497d"></span></p>
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">We
had an MSI Alpha + self-bonding midclamp shatter the
glass on an LG 280 last fall, as the factory set
point was sticking out too far, so as it was being
tightened down, on top of the module the point dug
through the module’s top frame hitting the glass,
shattering it.</span></p>
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">I
do wonder if there are any issues with this “point”
on the UniRac midclamps potential for doing the same
damage?</span></p>
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span></p>
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Chris
Worcester</span></p>
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Solar
Wind Works</span></p>
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">NABCEP
Certified PV Installer</span></p>
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Office
<a moz-do-not-send="true" href="tel:530-582-4503"
value="+15305824503" target="_blank">530-582-4503</a></span></p>
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Cell
<a moz-do-not-send="true" href="tel:530-448-9692"
value="+15304489692" target="_blank">530-448-9692</a></span></p>
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Fax
<a moz-do-not-send="true" href="tel:530-582-4603"
value="+15305824603" target="_blank">530-582-4603</a></span></p>
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><a
moz-do-not-send="true"
href="http://www.solarwindworks.com"
target="_blank">www.solarwindworks.com</a></span></p>
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><a
moz-do-not-send="true"
href="mailto:chris@solarwindworks.com"
target="_blank">chris@solarwindworks.com</a></span></p>
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"> </span></p>
<p class="MsoNormal"><b><span
style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">From:</span></b><span
style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">
RE-wrenches [mailto:<a moz-do-not-send="true"
href="mailto:re-wrenches-bounces@lists.re-wrenches.org"
target="_blank">re-wrenches-bounces@lists.re-wrenches.org</a>]
<b>On Behalf Of </b>Jason Szumlanski<br>
<b>Sent:</b> Thursday, June 25, 2015 1:13 PM<span
class=""><br>
<b>To:</b> RE-wrenches<br>
<b>Subject:</b> Re: [RE-wrenches] SnapNrack</span></span></p>
<p class="MsoNormal"> </p>
<div>
<p class="MsoNormal">That decision was based on our
distribution network offering better pricing on
Unirac, and engineers being comfortable with it. Now
with the integrated grounding from Unirac, I can't
see moving away from it again barring a significant
cost benefit. It also stacks and stocks easier than
the Ironridge rails.</p>
<div>
<p class="MsoNormal"><br clear="all">
</p>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<div>
<p class="MsoNormal"> </p>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
<p class="MsoNormal"> </p>
<div>
<div>
<div class="h5">
<p class="MsoNormal">On Wed, Jun 24, 2015 at
5:55 PM, Dana Brandt <<a
moz-do-not-send="true"
href="mailto:dana@ecotechenergy.com"
target="_blank">dana@ecotechenergy.com</a>>
wrote:</p>
<div>
<div>
<div>
<p class="MsoNormal"
style="margin-bottom:12.0pt">Hi Jason,</p>
</div>
<p class="MsoNormal"
style="margin-bottom:12.0pt">We've used
Unirac for years but have been
contemplating Ironridge. I'm curious
what your experience was and why you
went back to Unirac? <br>
<br>
Anyone else have input on best racking
systems for flush-mounted residential
systems on comp roof? </p>
</div>
<p class="MsoNormal">Thanks,</p>
<div>
<p class="MsoNormal"><br clear="all">
</p>
<div>
<div>
<div>
<p class="MsoNormal">Dana<br>
<br>
Dana Brandt<br>
Ecotech Energy Systems, LLC<br>
<a moz-do-not-send="true"
href="http://www.ecotechenergy.com"
target="_blank">www.ecotechenergy.com</a><br>
<a moz-do-not-send="true"
href="mailto:dana@ecotechenergy.com"
target="_blank">dana@ecotechenergy.com</a><br>
<a moz-do-not-send="true"
href="tel:360.318.7646"
target="_blank">360.318.7646</a></p>
</div>
</div>
</div>
<p class="MsoNormal"> </p>
<div>
<p class="MsoNormal">On Wed, Feb 5, 2014
at 12:09 PM, Jason Szumlanski <<a
moz-do-not-send="true"
href="mailto:jason@fafcosolar.com"
target="_blank">jason@fafcosolar.com</a>>
wrote:</p>
<div>
<div>
<p class="MsoNormal"><span
style="font-family:"Verdana","sans-serif"">By
Snap N Rack, you mean Sun Run...</span></p>
</div>
<div>
<p class="MsoNormal"><span
style="font-family:"Verdana","sans-serif""> </span></p>
</div>
<div>
<p class="MsoNormal"><span
style="font-family:"Verdana","sans-serif""><a
moz-do-not-send="true"
href="http://cleantechnica.com/2014/02/05/sunrun-acquires-rec-solars-residential-business-aee-solar-snapnrack-means/"
target="_blank">http://cleantechnica.com/2014/02/05/sunrun-acquires-rec-solars-residential-business-aee-solar-snapnrack-means/</a></span></p>
</div>
<div>
<p class="MsoNormal"> </p>
</div>
<div>
<p class="MsoNormal"><span
style="font-family:"Verdana","sans-serif"">I'm
curious if these vertical
integrators will still make
their acquired brands available
to small dealers through
distribution. When SolarCity
snatched up Zep, I had concerns
about being able to service or
add onto existing Zep systems we
installed. That's definitely a
concern going forward, and
reason to perhaps stick with the
most compatible racking
solutions available. We used
IronRidge for a while, which is
largely compatible with Unirac,
but now we're back on the Unirac
bandwagon. </span></p>
</div>
<div>
<p class="MsoNormal"> </p>
</div>
<div>
<p class="MsoNormal"><span
style="font-family:"Verdana","sans-serif"">Interesting
times...</span></p>
</div>
<p class="MsoNormal"
style="margin-bottom:12.0pt"> </p>
<div>
<div>
<div style="margin-bottom:6.0pt">
<p
style="margin:0in;margin-bottom:.0001pt"><span
style="font-size:10.0pt;font-family:"Verdana","sans-serif"">Jason
Szumlanski</span></p>
<div>
<p class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif""></span><span
style="font-size:10.0pt;font-family:"Verdana","sans-serif"">Fafco
Solar</span><span
style="font-size:10.0pt;font-family:"Arial","sans-serif""></span><span
style="font-size:10.0pt;font-family:"Verdana","sans-serif""></span></p>
</div>
<p class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Verdana","sans-serif""> </span></p>
</div>
<p class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Verdana","sans-serif""><img
moz-do-not-send="true"
src="https://wisestamp.appspot.com/pixview.gif?p=chrome&v=3.31.0&t=1391630669252&u=ce9344a8140ce271"
border="0" height="1"
width="1"></span></p>
</div>
</div>
</div>
<div>
<div>
<div>
<p class="MsoNormal"
style="margin-bottom:12.0pt"> </p>
<div>
<p class="MsoNormal">On Wed, Feb
5, 2014 at 12:45 PM, Max
Balchowsky <<a
moz-do-not-send="true"
href="mailto:max@seesolar.com"
target="_blank">max@seesolar.com</a>>
wrote:</p>
<div>
<div>
<div>
<p class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">We
have been using Snap
N' Rack for a while,
Have lots of installs
in Hawaii - so far no
problems, I like the
convenience of the
design for snapping in
the slider nut in mid
rail, and also the
ability to install the
panels flush with the
end of the rails….</span></p>
</div>
<div>
<div>
<p class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif""> </span></p>
</div>
<div>
<p class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">Max
Balchowsky<br>
Design Engineer<br>
SEE Systems<br>
1048 Irvine Ave
Suite 217<br>
Newport Beach, Ca.
92660<br>
<a
moz-do-not-send="true"
href="tel:760-403-6810" target="_blank">760-403-6810</a></span><span
style="font-size:10.0pt;font-family:"Arial","sans-serif""></span></p>
</div>
<div>
<p class="MsoNormal"><span
style="font-size:7.5pt;font-family:"Tahoma","sans-serif"">"Building
a Better Future For
The Next Generation"</span><span
style="font-size:10.0pt;font-family:"Tahoma","sans-serif""></span></p>
</div>
<div>
<p class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif""> </span></p>
</div>
</div>
<div>
<div>
<div>
<div class="MsoNormal"
style="text-align:center" align="center">
<hr align="center"
size="1"
width="100%"></div>
<p class="MsoNormal"><b><span
style="font-family:"Arial","sans-serif"">From:</span></b><span
style="font-family:"Arial","sans-serif""> Allen
Frishman <<a
moz-do-not-send="true"
href="mailto:amfrish@aeonsolar.com" target="_blank">amfrish@aeonsolar.com</a>><br>
<b>To:</b>
RE-wrenches <<a
moz-do-not-send="true" href="mailto:re-wrenches@lists.re-wrenches.org"
target="_blank">re-wrenches@lists.re-wrenches.org</a>>
<br>
<b>Sent:</b>
Wednesday,
February 5, 2014
6:17 AM<br>
<b>Subject:</b>
Re: [RE-wrenches]
SnapNrack</span></p>
</div>
<div>
<div>
<div>
<p
class="MsoNormal"> </p>
<div>
<div>
<p
class="MsoNormal">I
am curious
about the mid
clamps on the
snapnrack.
The flange
that rests on
top of the
solar panel
frame is so
small ~ 3/16".
Anyone
experience any
problems with
these failing
in a big
storm? With
solar panel
frames not
being square
it is nice to
have a little
extra to grab
- I am always
curious as to
why these
clips are made
with such a
small area to
hold the
panels down.
</p>
<div>
<p
class="MsoNormal"> </p>
</div>
<div>
<p
class="MsoNormal">All
feedback on
these clips is
appreciated.</p>
<div>
<div>
<div>
<p
class="MsoNormal"><i><span
style="font-size:10.5pt;font-family:"Helvetica","sans-serif"">Al
Frishman</span></i><span
style="font-size:13.5pt;font-family:"Helvetica","sans-serif""><br>
<span
style="color:#030100">Aeon</span><span
style="color:#ff9700">Solar</span></span></p>
</div>
<div>
<p
class="MsoNormal"><i><span
style="font-size:10.5pt;font-family:"Helvetica","sans-serif""><a
moz-do-not-send="true" href="tel:%28917%29%20699-6641"
value="+19176996641"
target="_blank">(917) 699-6641</a> - cell</span></i><span
style="font-size:10.5pt;font-family:"Helvetica","sans-serif""><br>
<i><a
moz-do-not-send="true"
href="tel:%28888%29%20460-2867" value="+18884602867" target="_blank">(888)
460-2867</a></i><br>
<i><a
moz-do-not-send="true"
href="http://www.aeonsolar.com/" target="_blank">www.aeonsolar.com</a></i></span><span
style="font-size:13.5pt;font-family:"Helvetica","sans-serif""></span></p>
</div>
</div>
</div>
<p
class="MsoNormal"> </p>
<div>
<div>
<p
class="MsoNormal">On
Jun 1, 2013,
at 10:41 AM,
Max Balchowsky
wrote:</p>
</div>
<p
class="MsoNormal"><br>
<br>
</p>
<div>
<div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">Have
installed last
three systems
(35Kw)with
snap n rack.</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">love
it....</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif""> </span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">Max
Balchowsky<br>
Design
Engineer<br>
SEE Systems</span><span
style="font-size:10.0pt;font-family:"Arial","sans-serif""><br>
</span><span
style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">1048
Irvine Ave
Suite 217<br>
Newport Beach,
Ca. 92660<br>
<a
moz-do-not-send="true"
href="tel:760-403-6810" target="_blank">760-403-6810</a></span><span
style="font-size:10.0pt;font-family:"Arial","sans-serif""></span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:7.5pt;font-family:"Tahoma","sans-serif"">"Building
a Better
Future For The
Next
Generation"</span><span
style="font-size:10.0pt;font-family:"Tahoma","sans-serif""></span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif""> </span></p>
</div>
<div>
<div>
<div>
<div
class="MsoNormal"
style="text-align:center" align="center">
<hr
align="center"
size="1"
width="100%"></div>
<p
class="MsoNormal"><b><span
style="font-family:"Arial","sans-serif"">From:</span></b><span
style="font-family:"Arial","sans-serif""> Solarguy
<<a
moz-do-not-send="true"
href="mailto:ntrei@1scom.net" target="_blank">ntrei@1scom.net</a>><br>
<b>To:</b>
'RE-wrenches'
<<a
moz-do-not-send="true"
href="mailto:re-wrenches@lists.re-wrenches.org" target="_blank">re-wrenches@lists.re-wrenches.org</a>>
<br>
<b>Sent:</b>
Friday, May
31, 2013 10:11
PM<br>
<b>Subject:</b>
Re:
[RE-wrenches]
SnapNrack</span></p>
</div>
<div>
<p
class="MsoNormal"> </p>
<div>
<div>
<div>
<div>
<p
class="MsoNormal"><span
style="font-size:14.0pt">The only complaint with the Snapnrack rails is
the thin wall
can easily be
distorted.
This will
allow the nut
to drop out of
its groove.
Love the
universal end
clamps but
have learned
to assemble
every one to
check for
proper fit
before getting
on the roof.</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:14.0pt">Jim Duncan</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:14.0pt">-----Original Message-----<br>
From: <a
moz-do-not-send="true"
href="mailto:re-wrenches-bounces@lists.re-wrenches.org" target="_blank">re-wrenches-bounces@lists.re-wrenches.org</a>
[mailto:<a
moz-do-not-send="true"
href="mailto:re-wrenches-bounces@lists.re-wrenches.org" target="_blank">re-wrenches-bounces@lists.re-wrenches.org</a>]
On Behalf Of
Drake<br>
Sent: Friday,
May 31, 2013
7:32 PM</span><br>
To: <a
moz-do-not-send="true"
href="mailto:re-wrenches@lists.re-wrenches.org" target="_blank">re-wrenches@lists.re-wrenches.org</a><br>
Subject:
[RE-wrenches]
SnapNrack</p>
</div>
<div>
<p
class="MsoNormal"> </p>
</div>
<div>
<p
class="MsoNormal">Hello
Wrenches,</p>
</div>
<div>
<p
class="MsoNormal"> </p>
</div>
<div>
<p
class="MsoNormal">How
would you rate
the SnapNrack
mounting
systems
against Unirac
and other
mounting
systems?</p>
</div>
<div>
<p
class="MsoNormal"> </p>
</div>
<div>
<p
class="MsoNormal">Thanks,</p>
</div>
<div>
<p
class="MsoNormal"> </p>
</div>
<div>
<p
class="MsoNormal">Drake</p>
</div>
<div>
<p
class="MsoNormal"> </p>
</div>
<div>
<p
class="MsoNormal">_______________________________________________</p>
</div>
<div>
<p
class="MsoNormal">List
sponsored by
Home Power
magazine</p>
</div>
<div>
<p
class="MsoNormal"> </p>
</div>
<div>
<p
class="MsoNormal">List
Address: <a
moz-do-not-send="true"
href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank"><span
style="color:windowtext;text-decoration:none">RE-wrenches@lists.re-wrenches.org</span></a></p>
</div>
<div>
<p
class="MsoNormal"> </p>
</div>
<div>
<p
class="MsoNormal">Change
email address
&
settings:</p>
</div>
<div>
<p
class="MsoNormal"><a
moz-do-not-send="true"
href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org"
target="_blank"><span style="color:windowtext;text-decoration:none">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</span></a></p>
</div>
<div>
<p
class="MsoNormal"> </p>
</div>
<div>
<p
class="MsoNormal">List-Archive:
<a
moz-do-not-send="true"
href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org"
target="_blank"><span style="color:windowtext;text-decoration:none">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</span></a></p>
</div>
<div>
<p
class="MsoNormal"> </p>
</div>
<div>
<p
class="MsoNormal">List
rules &
etiquette:</p>
</div>
<div>
<p
class="MsoNormal"><a
moz-do-not-send="true" href="http://www.re-wrenches.org/etiquette.htm"
target="_blank"><span
style="color:windowtext;text-decoration:none">www.re-wrenches.org/etiquette.htm</span></a></p>
</div>
<div>
<p
class="MsoNormal"> </p>
</div>
<div>
<p
class="MsoNormal">Check
out
participant
bios:</p>
</div>
<div>
<p
class="MsoNormal"><a
moz-do-not-send="true" href="http://www.members.re-wrenches.org/"
target="_blank"><span
style="color:windowtext;text-decoration:none">www.members.re-wrenches.org</span></a></p>
</div>
</div>
</div>
</div>
<p
class="MsoNormal"
style="margin-bottom:12.0pt"><br>
_______________________________________________<br>
List sponsored
by Home Power
magazine<br>
<br>
List Address:
<a
moz-do-not-send="true"
href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change email
address &
settings:<br>
<a
moz-do-not-send="true"
href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org"
target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive:
<a
moz-do-not-send="true"
href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org"
target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules
&
etiquette:<br>
<a
moz-do-not-send="true"
href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out
participant
bios:<br>
<a
moz-do-not-send="true"
href="http://www.members.re-wrenches.org/" target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br>
</p>
</div>
</div>
</div>
<div>
<div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">Preferences</span></p>
</div>
</div>
<div>
<div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">§</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">1</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">2</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">3</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">4</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">5</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">6</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">7</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">8</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">9</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">0</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">-</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">=</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">Backspace</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">Tab</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">q</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">w</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">e</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">r</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">t</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">y</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">u</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">i</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">o</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">p</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">[</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">]</span></p>
</div>
<div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">Return</span></p>
</div>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">capslock</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">a</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">s</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">d</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">f</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">g</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">h</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">j</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">k</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">l</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">;</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">'</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">\</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">shift</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">`</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">z</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">x</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">c</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">v</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">b</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">n</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">m</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">,</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">.</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">/</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">shift</span></p>
</div>
<div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">English</span></p>
</div>
<div>
<div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">Deutsch</span></p>
</div>
</div>
<div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">Español</span></p>
</div>
</div>
<div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">Français</span></p>
</div>
</div>
<div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">Italiano</span></p>
</div>
</div>
<div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">Polski</span></p>
</div>
</div>
<div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">Português</span></p>
</div>
</div>
<div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">Русский</span></p>
</div>
</div>
</div>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">alt</span></p>
</div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">alt</span></p>
</div>
</div>
</div>
</div>
<div>
<div>
<div>
<p
class="MsoNormal"><span
style="font-size:10.0pt;font-family:"Arial","sans-serif"">Preferences</span></p>
</div>
</div>
</div>
</div>
</div>
<p
class="MsoNormal"
style="margin-bottom:12.0pt">_______________________________________________<br>
List sponsored
by Home Power
magazine<br>
<br>
List Address:
<a
moz-do-not-send="true"
href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change email
address &
settings:<br>
<a
moz-do-not-send="true"
href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org"
target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive:
<a
moz-do-not-send="true"
href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org"
target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules
&
etiquette:<br>
<a
moz-do-not-send="true"
href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out
participant
bios:<br>
<a
moz-do-not-send="true"
href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a></p>
</div>
<p
class="MsoNormal"> </p>
</div>
</div>
</div>
<p
class="MsoNormal"
style="margin-bottom:12.0pt"><br>
_______________________________________________<br>
List sponsored
by Home Power
magazine<br>
<br>
List Address: <a
moz-do-not-send="true" href="mailto:RE-wrenches@lists.re-wrenches.org"
target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change email
address &
settings:<br>
<a
moz-do-not-send="true"
href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org"
target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a
moz-do-not-send="true"
href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org"
target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules &
etiquette:<br>
<a
moz-do-not-send="true"
href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out
participant
bios:<br>
<a
moz-do-not-send="true"
href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br>
</p>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
<p class="MsoNormal"
style="margin-bottom:12.0pt"><br>
_______________________________________________<br>
List sponsored by Home Power
magazine<br>
<br>
List Address: <a
moz-do-not-send="true"
href="mailto:RE-wrenches@lists.re-wrenches.org"
target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change email address &
settings:<br>
<a moz-do-not-send="true"
href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org"
target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a
moz-do-not-send="true"
href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org"
target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a moz-do-not-send="true"
href="http://www.re-wrenches.org/etiquette.htm"
target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out participant bios:<br>
<a moz-do-not-send="true"
href="http://www.members.re-wrenches.org"
target="_blank">www.members.re-wrenches.org</a><br>
<br>
</p>
</div>
<p class="MsoNormal"> </p>
</div>
</div>
</div>
<p class="MsoNormal"
style="margin-bottom:12.0pt"><br>
_______________________________________________<br>
List sponsored by Home Power magazine<br>
<br>
List Address: <a
moz-do-not-send="true"
href="mailto:RE-wrenches@lists.re-wrenches.org"
target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change email address & settings:<br>
<a moz-do-not-send="true"
href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org"
target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a
moz-do-not-send="true"
href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org"
target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a moz-do-not-send="true"
href="http://www.re-wrenches.org/etiquette.htm"
target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out participant bios:<br>
<a moz-do-not-send="true"
href="http://www.members.re-wrenches.org"
target="_blank">www.members.re-wrenches.org</a><br>
<br>
</p>
</div>
<p class="MsoNormal"> </p>
</div>
</div>
</div>
</div>
<p class="MsoNormal" style="margin-bottom:12.0pt"><br>
<span class="">_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a moz-do-not-send="true"
href="mailto:RE-wrenches@lists.re-wrenches.org"
target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
</span>Change listserver email address &
settings:<br>
<a moz-do-not-send="true"
href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org"
target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a moz-do-not-send="true"
href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html"
target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><span
class=""><br>
<br>
List rules & etiquette:<br>
<a moz-do-not-send="true"
href="http://www.re-wrenches.org/etiquette.htm"
target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
</span><span class="">Check out or update
participant bios:<br>
<a moz-do-not-send="true"
href="http://www.members.re-wrenches.org"
target="_blank">www.members.re-wrenches.org</a><br>
<br>
</span></p>
</div>
<p class="MsoNormal"> </p>
</div>
</div>
</div>
</div>
<br>
_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a moz-do-not-send="true"
href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a moz-do-not-send="true"
href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org"
rel="noreferrer" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a moz-do-not-send="true"
href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html"
rel="noreferrer" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a moz-do-not-send="true"
href="http://www.re-wrenches.org/etiquette.htm"
rel="noreferrer" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a moz-do-not-send="true"
href="http://www.members.re-wrenches.org" rel="noreferrer"
target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br>
</blockquote>
</div>
<br>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
List sponsored by Redwood Alliance
List Address: <a class="moz-txt-link-abbreviated" href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a>
Change listserver email address & settings:
<a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a>
List-Archive: <a class="moz-txt-link-freetext" href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a>
List rules & etiquette:
<a class="moz-txt-link-abbreviated" href="http://www.re-wrenches.org/etiquette.htm">www.re-wrenches.org/etiquette.htm</a>
Check out or update participant bios:
<a class="moz-txt-link-abbreviated" href="http://www.members.re-wrenches.org">www.members.re-wrenches.org</a>
</pre>
</blockquote>
<br>
</body>
</html>