<html>
<head>
<meta content="text/html; charset=windows-1252"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Having the LVD be temperature compensated so that the load is always
disconnected above the freeze point of the battery would be a Huge
Improvement on the whole concept of LVD. In combination with State
of Charge monitoring, like the Whiz bang Jr, would be the most
effective, and just program the disconnect to stay above freezing
for a typical lead acid battery. I got this from a Trojan White
Paper:<br>
<img src="cid:part1.02030009.09040707@solarray.com" alt=""><br>
<pre class="moz-signature" cols="72">R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760</pre>
<br>
<blockquote cite="mid:5561225F.6040805@midnitesolar.com" type="cite">
<br>
FLA batteries will freeze easier if they are discharged. I
suppose that you could
<br>
use the battery temp sensor to make sure you charge them up good
when
<br>
the temp gets cold enough.
<br>
<br>
boB
<br>
</blockquote>
</body>
</html>