<div dir="ltr">Hi Guys,<div><br></div><div><br></div><div>The high current can be in the form of higher irradience, not the current in the lightning. That can destroy the diodes.<br></div><div><br></div><div>you should be able to test on the module side of the diodes to see if there is voltage on the cell side.</div><div>And that will tell you if its worth trying to replace the diodes.</div><div><br></div><div>jay</div><div><br></div><div><br></div><div><br></div><div><br></div><div class="gmail_extra"><br><div class="gmail_quote">On Thu, May 21, 2015 at 5:38 PM,  <span dir="ltr"><<a href="mailto:toddcory@finestplanet.com" target="_blank">toddcory@finestplanet.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><font face="arial" size="4"><p style="margin:0;padding:0;font-family:arial;font-size:14pt;word-wrap:break-word">but under a surge like a lightning strike wouldn't the diodes open rather than short?</p>
<p style="margin:0;padding:0;font-family:arial;font-size:14pt;word-wrap:break-word"> </p>
<p style="margin:0;padding:0;font-family:arial;font-size:14pt;word-wrap:break-word">i always considered the pv's to be the least likely thing to be damaged from lightning and inverters and charge controllers (electronics) to be the most vulnerable. what in a pv would fail? an intercell connecting wire or would it actually damage the cell on a semiconductor level?</p>
<p style="margin:0;padding:0;font-family:arial;font-size:14pt;word-wrap:break-word"> </p>
<p style="margin:0;padding:0;font-family:arial;font-size:14pt;word-wrap:break-word">todd</p><div><div class="h5">
<p style="margin:0;padding:0;font-family:arial;font-size:14pt;word-wrap:break-word"> </p>
<p style="margin:0;padding:0;font-family:arial;font-size:14pt;word-wrap:break-word"> </p>

<p style="margin:0;padding:0;font-family:arial;font-size:14pt;word-wrap:break-word"><br><br>On Thursday, May 21, 2015 4:46pm, "Matt Sherald" <<a href="mailto:matt@getpimby.com" target="_blank">matt@getpimby.com</a>> said:<br><br></p>
<div>
<div dir="ltr">
<div>
<div>Hi Wayne,<br><br></div>
Several years back I had all sixteen SolarWorld modules on a tracker get zapped.  The two other trackers adjacent to this one had no damaged modules.  The same strike blew out the phone box at the end of the road (some distance away).  <br><br>The SolarWorld jboxes were all sealed with no way to get to the diodes.  The homeowners insurance covered the loss and I replaced the modules with something similar (SW had since stopped manufacturing 175s).  It would have been nice to have had access to the diodes.<br><br><br>-- <br>
<div>
<div>
<div>Matt Sherald</div>
PIMBY Energy, LLC</div>
<div>NABCEP Certified Solar PV Installer®</div>
<a href="tel:304-704-5943" value="+13047045943" target="_blank">304-704-5943</a><br><br></div>
<div><a href="http://www.getpimby.blogspot.com" target="_blank">www.getpimby.blogspot.com</a></div>
<a href="http://www.getpimby.com" target="_blank">www.getpimby.com</a></div>
<div class="gmail_extra"><br>
<div class="gmail_quote">On Thu, May 21, 2015 at 7:28 PM, Wayne Irwin <span dir="ltr"><<a href="mailto:wayne@pureenergysolar.com" target="_blank">wayne@pureenergysolar.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid #cccccc;padding-left:1ex">
<div>
<div dir="ltr"><span style="font-size:medium;color:#000000">Hello Wrenches,<br><br>Today we visited a 10KW residential ground mounted system where there was a recent lightning strike that fried phones, irrigation system, cable and apparently the array.<br><br>There was no external visible damage but also no voltage at the combiner. We pulled 10-15 module junction box covers off and only saw clear evidence of damage to one diode. There was no Voc on any of the modules.<br>While I recognize that Florida is arguably the lightning capital of N America, I have never seen an entire array fried.<br><br>Has anyone on the list ever seen an entire array fried?<br><br>The modules are Schuco 230's. </span><br><span style="font-size:medium;color:#000000"><span style="font-size:medium;color:#000000">Obviously not covered by warranty and Schuco has pretty much bailed out of the US market.<br><br></span>Does anyone have experience repairing these modules?<br><br>Any similar experience and/or advice would be appreciated.<br></span><br><br><span style="font-size:medium;color:#008a17">Wayne Irwin</span><span style="font-size:medium;color:#008a17">,</span><span style="font-size:medium;color:#008a17"><br></span><span style="font-size:medium;color:#008a17">Presid</span></div></div>____<br></blockquote>
</div>
<br><br><br></div></div></div></div></div></font></blockquote></div><br><br clear="all"><div><br></div>-- <br><div class="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div>Jay Peltz<br>Peltz Power<br><a href="mailto:jay.peltz@gmail.com" target="_blank">jay.peltz@gmail.com</a></div></div></div></div></div>
</div></div>