<div dir="ltr">Hi Jay,<div><br></div><div>Just use your roofing sealant of choice: fill the pilot hole, leaving a nice big dab on the surface. Because all holes are in the peaks of the corrugations, the penetration point should see very little water there. In my opinion, this is less risky than trying to seal the corrugations with a dynaflash.</div><div><br></div><div>Although the manufacturer's literature also shows using this product with pro-panel type roofs, for those we prefer either standoffs with dyna-flash or Schletter Fix-Ts.</div><div><br></div><div>Cheers,</div><div><br></div><div>Mark</div></div><div class="gmail_extra"><br clear="all"><div><div class="gmail_signature"><div dir="ltr"><div><div dir="ltr">----<br><b>Mark Westbrock</b><br>Branch Manager & Employee-Owner<div>NM EE98J Journeyman Electrician<br>NABCEP Certified PV Installation Professional<div>NABCEP Certified PV Technical Sales<br><br><div><br></div><div><a href="http://positiveenergysolar.com/" target="_blank"><img src="http://positiveenergysolar.com/admin/content/uploads/PES-logo-3.jpg" width="200" height="86"></a><br></div><div><div><br></div><div>Positive Energy, Inc.<br><div>510 S. Main St.</div><div>Las Cruces, NM 88001<br>office: 575-524-2030<br>cell: 575-640-2432<br><a href="mailto:westbrock@positiveenergysolar.com" target="_blank">mw@positiveenergysolar.com</a><br><a href="http://www.positiveenergysolar.com" target="_blank">www.positiveenergysolar.com</a></div></div></div><div><br></div><div><img src="http://positiveenergysolar.com/admin/content/uploads/residential_national_dealers_2013_w.jpg"><br></div><div><br></div><div> <a href="http://www.nabcep.org/installer-locator?state=NM" target="_blank"><img src="http://positiveenergysolar.com/admin/content/uploads/NABCEP-installer.jpg-e1367536303488.jpg" width="96" height="81"></a><a href="http://www.nabcep.org/installer-locator?state=NM" target="_blank"> <img src="http://positiveenergysolar.com/admin/content/uploads/NABCEP-sales.jpg-e1367536139967.jpg" width="96" height="81"></a> <a href="http://www.solarreviews.com/installers/positive-energy-solar/" target="_blank"><img src="http://positiveenergysolar.com/admin/content/uploads/SolarReview-e1374100648314.jpg"></a> <a href="http://www.bcorporation.net/" target="_blank"><img src="http://positiveenergysolar.com/admin/content/uploads/E_BCorp_logo_POS-e1374100838300.jpg"></a></div></div></div></div></div></div></div></div>
<br><div class="gmail_quote">On Thu, Mar 5, 2015 at 3:40 PM, jay peltz <span dir="ltr"><<a href="mailto:jay@asis.com" target="_blank">jay@asis.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div style="word-wrap:break-word">Hi Mark,<div><br></div><div>I'm curious how you seal the hole.</div><div><br></div><div>thanks</div><div><br></div><div>jay</div><div><br></div><div>peltz power</div><div><div class="h5"><div><br></div><div><br><div><div>On Mar 5, 2015, at 9:46 AM, Mark Westbrock <<a href="mailto:westbrock@positiveenergysolar.com" target="_blank">westbrock@positiveenergysolar.com</a>> wrote:</div><br><blockquote type="cite"><div dir="ltr">We like the <a href="http://www.snapnrack.com/series-500-metal-roof-mount-system" target="_blank">SnapNrack corrugated roof blocks</a>. They are simple, effective, and not too expensive (I think around $3.50 each). The only trick is that you need access to the roofing members because you will need to add blocking or sister up trusses so that you have a structural member directly below a corrugation peak.<div class="gmail_extra"><div><div><div dir="ltr"><div dir="ltr">----<br><b>Mark Westbrock</b><br>Branch Manager & Employee-Owner<div>NM EE98J Journeyman Electrician<br>NABCEP Certified PV Installation Professional<div>NABCEP Certified PV Technical Sales<br><br><div>Positive Energy, Inc.<br></div><div><div>510 S. Main St.</div><div>Las Cruces, NM 88001<br>office: <a href="tel:575-524-2030" value="+15755242030" target="_blank">575-524-2030</a><br>cell: <a href="tel:575-640-2432" value="+15756402432" target="_blank">575-640-2432</a><br><a href="mailto:westbrock@positiveenergysolar.com" target="_blank">mw@positiveenergysolar.com</a><br><a href="http://www.positiveenergysolar.com/" target="_blank">www.positiveenergysolar.com</a></div></div><div><br></div><div> <br></div></div></div></div></div></div></div>
<br><div class="gmail_quote">On Thu, Mar 5, 2015 at 9:00 AM, AE Solar <span dir="ltr"><<a href="mailto:autonomousenergies@gmail.com" target="_blank">autonomousenergies@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Hey Wrenchers,<div>Anyone have feedback or preferences on mounting systems for corrugated roofs? I'm looking at the <a href="http://www.s-5.com/clamps/index_2624.cfm" target="_blank">S-5! CorruBracket</a>. Its for a very small system on a hunting cabin. The pitch is probably about 20 degrees and and I'm concerned about leaks over time. Any recommendations are appreciated. Thanks</div><div>Adam</div><div><br clear="all"><div><div dir="ltr">Adam Katzman<br>Autonomous Energies<br>4872 State Route 9G <br>Germantown NY, 12526<br><a href="http://www.autonomousenergies.com/" target="_blank">www.autonomousenergies.com</a><br><a href="tel:%28518%29%20567-1468" value="+15185671468" target="_blank">(518) 567-1468</a><br><br></div></div>
</div></div>
<br>_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org/" target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br></blockquote></div><br></div></div>
_______________________________________________<br>List sponsored by Redwood Alliance<br><br>List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br><br>Change listserver email address & settings:<br><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br><br>List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br><br>List rules & etiquette:<br><a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br><br>Check out or update participant bios:<br><a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><br><br></blockquote></div><br></div></div></div></div><br>_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br></blockquote></div><br></div>