<div dir="ltr">I like the Petzel strapped helmets too Ray, I have the Elios. My only complaint is that when I have to wear a fleece balaclava under it the chin strap is too short, and when I contacted Petzl they said there are no extenders available. Solution was to buy a BIG balaclava that fits over the helmet. Mine is not approved for some wind turbine work because the close-able vents can still let in liquid. Not an issue with the work I do. <div><br></div><div>I have a friend who really likes the Petzl Navaho harness, I've never tried one. The Petzl rescue device is also very ligthweight and easy to use. I love my Petzl lightweight rope grab. I also like CAMP pulleys, lightweight and great prices. I like Petzl double-locking carabiners. Also a fan of Squids tool lanyards.</div><div><br></div><div>Rock climbing gear is great because it's lightweight and easy to adjust, you just have to check the specs to make sure OSHA will approve. I would also imagine that if an incident happened, having everything ANSI spec would be a good CYA. Never been in that situation fortunately.</div><div><br></div><div>Best;</div></div><div class="gmail_extra"><br clear="all"><div><div class="gmail_signature"><div dir="ltr">Dan Fink<div>Buckville Energy</div><div>IREC Certified Instructor™ for: </div><div>~ PV Installation Professional</div><div>~ Small Wind Installer</div><div>NABCEP / IREC / ISPQ Accredited Continuing Education Providers™<br>970.672.4342<br><br> </div></div></div></div>
<br><div class="gmail_quote">On Sat, Jan 17, 2015 at 5:44 PM, Ray Walters <span dir="ltr"><<a href="mailto:ray@solarray.com" target="_blank">ray@solarray.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div bgcolor="#FFFFFF" text="#000000">
<div>Hi Glenn;<br>
<br>
What's your opinion on Petzl's professional line of full body
harnesses? I noticed too that their cool strapped helmets are
ANSI approved. I never thought regular strapless construction
hard hats made sense on a roof either. (always falling off and
causing a hazard to workers below.....)<span class=""><br>
<pre cols="72">R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
<a href="tel:303%20505-8760" value="+13035058760" target="_blank">303 505-8760</a></pre></span><div><div class="h5">
On 1/17/2015 2:05 PM, Glenn Burt wrote:<br>
</div></div></div>
<blockquote type="cite"><div><div class="h5">
<div>
<div style="font-family:Calibri,sans-serif;font-size:11pt">Standard
OSHA personal safety harnesses are designed to keep someone
upright and without pressure on the diaphragm in the event of
loss of consciousness.<br>
Having done substantial rock and ice climbing with state of
the art climbing gear, I can tell you that it is not designed
for that at all.<br>
<br>
Sincerely,<br>
Glenn Burt<br>
Sent from my 'smart' phone so please excuse grammar and typos.</div>
</div>
<div dir="ltr">
<hr><span style="font-family:Calibri,sans-serif;font-size:11pt;font-weight:bold">From: </span><span style="font-family:Calibri,sans-serif;font-size:11pt"><a href="mailto:william@millersolar.com" target="_blank">William
Miller</a></span><br>
<span style="font-family:Calibri,sans-serif;font-size:11pt;font-weight:bold">Sent: </span><span style="font-family:Calibri,sans-serif;font-size:11pt">1/17/2015 14:20</span><br>
<span style="font-family:Calibri,sans-serif;font-size:11pt;font-weight:bold">To: </span><span style="font-family:Calibri,sans-serif;font-size:11pt"><a href="mailto:re-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches</a></span><br>
<span style="font-family:Calibri,sans-serif;font-size:11pt;font-weight:bold">Subject: </span><span style="font-family:Calibri,sans-serif;font-size:11pt">Re: [RE-wrenches] Fall
Protection Equipment</span><br>
<br>
</div>
<div>Friends:</div>
<div><br>
</div>
<div>Industrial fall protection with rear attachment offers no
functionality in keeping a worker in place on a steep steel
roof. We install planks in these situations but would also like
to be able to cinch up a line connected to the workers waist or
chest in the front to provide extra stability. Rear attached
harnesses do not provide that. </div>
<div><br>
</div>
<div>William <br>
<br>
<br>
</div>
<div><br>
On Jan 17, 2015, at 11:00 AM, Ray Walters <<a href="mailto:ray@solarray.com" target="_blank">ray@solarray.com</a>>
wrote:<br>
<br>
</div>
<blockquote type="cite">
<div>
<div>I prefer climbing gear as its
much lighter weight and doesn't drag you around. I actually
think in some cases that traditional fall protection gear
can be more of a tripping hazard than the safety it
provides. However, I was previously under the impression
that if OSHA (or in the islands: HIOSH) came around, we had
to ditch the climbing gear and get into the 3 times as heavy
regular harnesses.<br>
I just looked at the OSHA website though, and it doesn't
seem to specify certification, just that the equipment meet
the fall criteria as Dan mentioned.<br>
<a href="https://www.osha.gov/Region7/fallprotection/fall_protection_info.html" target="_blank">https://www.osha.gov/Region7/fallprotection/fall_protection_info.html</a><br>
This doesn't mention test procedures or certification of
equipment. Here's more from the actual OSHA 1926 book:<br>
<br>
<span><strong><font>1926.502(e)(3)</font></strong>
<blockquote>Connectors shall be drop forged, pressed or
formed steel, or made of equivalent materials.</blockquote>
<a name="14afcfbc6607f45f_1926.502(e)(4)"></a> <strong><font>1926.502(e)(4)</font></strong>
<blockquote>Connectors shall have a corrosion-resistant
finish, and all surfaces and edges shall be smooth to
prevent damage to interfacing parts of this system.</blockquote>
<a name="14afcfbc6607f45f_1926.502(e)(5)"></a> <strong><font>1926.502(e)(5)</font></strong>
<blockquote>Connecting assemblies shall have a minimum
tensile strength of 5,000 pounds (22.2 kN)</blockquote>
<a name="14afcfbc6607f45f_1926.502(e)(6)"></a> <strong><font>1926.502(e)(6)</font></strong>
<blockquote>Dee-rings and snaphooks shall be proof-tested
to a minimum tensile load of 3,600 pounds (16 kN)
without cracking, breaking, or taking permanent
deformation.<br>
<br>
</blockquote>
</span>"Equivalent materials" ? Seems that an aluminum
caribiner that meets the other criteria would be equivalent.<br>
<br>
Here, Petzl also makes a full line of worker safety
equipment: <a href="http://www.petzl.com/en/Professional/Verticality?l=US#.VLqw4nuLXfc" target="_blank">http://www.petzl.com/en/Professional/Verticality?l=US#.VLqw4nuLXfc</a><br>
<br>
This is really interesting, and I would like to have a more
definitive answer from OSHA. It would be great if we could
use lighter weight climbing gear; just compare a caribiner
to the heavy steel monsters you get at Grainger's. As long
as it is strong enough:<br>
Lighter weight = less fatigue= safer, IMHO. <br>
As with so many discussions on this list, it will ultimately
depend on your local authorities.<br>
<pre cols="72">R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
<a href="tel:303%20505-8760" value="+13035058760" target="_blank">303 505-8760</a></pre>
On 1/16/2015 11:20 PM, Benn Kilburn wrote:<br>
</div>
<blockquote type="cite">
<pre>James,
This looks like a pretty nice lanyard w/ shock-absorber, rope-grab and rope.
What type/style harness did he bring along?
Re: OSHA approved...great question. Prior to looking into it further I'd suspect it falls in a "grey area".
Benn Kilburn
SkyFire Energy Inc.
<a href="tel:780-906-7807" value="+17809067807" target="_blank">780-906-7807</a>
</pre>
<blockquote type="cite">
<pre>On Jan 16, 2015, at 9:29 AM, James Rudolph <a href="mailto:jamesrudolph99@gmail.com" target="_blank"><jamesrudolph99@gmail.com></a> wrote:
Aloha my Wrench Brothers!
We have a recent defector from a very large National Solar company here that</pre>
</blockquote>
</blockquote>
</div>
</blockquote>
<br>
<div>[The entire original message is not included.]</div>
<br>
<fieldset></fieldset>
<br>
</div></div><span class=""><pre>_______________________________________________
List sponsored by Redwood Alliance
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a>
Change listserver email address & settings:
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a>
List rules & etiquette:
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a>
Check out or update participant bios:
<a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a>
</pre>
</span></blockquote>
<br>
</div>
<br>_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br></blockquote></div><br></div>