<div dir="ltr"><div><div>wrenches<br></div>Due to the voltage we use Grid tie PV we will only put our wire in conduit and old school rule is DC runs better through stranded vs solid core. I do see allot of contractors use romex for there enphase type installs but that AC there too we use conduit. You will need to have a disconnect before the DC enters the home and from our AHJ under the home is included in that. <br></div>Jerry<br></div><div class="gmail_extra"><br><div class="gmail_quote">On Wed, Dec 17, 2014 at 4:51 PM, Corey Shalanski <span dir="ltr"><<a href="mailto:cshalanski@joule-energy.com" target="_blank">cshalanski@joule-energy.com</a>></span> wrote:<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Wrenches,<div><br></div><div>In New Orleans there are a lot of raised houses (on piers, etc). Assuming we kept the array source/output circuits in conduit on the exterior of the house, would it be Code-permissible to switch to Romex for any DC runs underneath the house? e.g. to an inverter on the opposite exterior wall?</div><div><br></div><div>690.31(E) does not appear to preclude this possibility. Something tells me this may be a bad idea, but I wanted to hear others' thoughts.</div><div><br></div><div>Thanks,</div><div>Corey Shalanski</div><div>Joule Energy</div><div>NOLA</div></div>
<br>_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br></blockquote></div></div>