<div dir="ltr">Mostly a stop-gap measure to keep an off-grid system operative until the fire insurance settlements come through, then rip the burnt PV out and start over. Those insurance folks take forever to pay.</div><div class="gmail_extra">
<br clear="all"><div><div dir="ltr">Dan Fink<div>Buckville Energy</div><div>IREC Certified Instructor™ for: </div><div>~ PV Installation Professional</div><div>~ Small Wind Installer<br>970.672.4342<br><br> </div></div></div>

<br><br><div class="gmail_quote">On Sun, Aug 31, 2014 at 11:06 PM,  <span dir="ltr"><<a href="mailto:don@energysolarnow.com" target="_blank">don@energysolarnow.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div><span style="font-family:Verdana;color:#000000;font-size:10pt"><div>Hi Ron- While I agree with Dan of Exeltech that it would be best to just replace the damaged panel, if you want to try salvage you might want to use a conformal coating that is commonly used to seal PC boards.  Conformal coatings can be sprayed or brushed on. In your case a brushing may further damage the fragile surfaces so you should stick with a spray on type. There are several brands that come up on a Google search. Read the Wiki page to pick the right chemistry.  <a href="http://en.wikipedia.org/wiki/Conformal_coating" target="_blank">http://en.wikipedia.org/wiki/Conformal_coating</a><br>
</div><div>Don Barch</div><div>Energy Solar<br></div><div><br></div><div>> On Sun, Aug 31, 2014 at 5:32 AM, Ron Young <<a href="mailto:solareagle@solareagle.com" target="_blank">solareagle@solareagle.com</a>><br>

> wrote:<br>
><br>
>> Hello Wrenches,<br>
>> I have an installation of 165w PV on a pole mount that was exposed to a<br>
>> fire from the rear when the customers shop burned. 6 of the 10 panels<br>
>> survived with only replacement of the MC4 plugs required but one of the<br>
>> panels that is still functioning had the rear coating melted off. The cells<br>
>> and electrical grid still function. Can anyone recommend a replacement<br>
>> coating that may salvage this panel for a few more years. I know if left<br>
>> exposed it will soon deteriorate but am wondering if some kind of commonly<br>
>> available non conductive rubberized or latex type of coating might do the<br>
>> job?<br>
>><br>
>> Ron Young<br>
>> _______________________________________________<br>
>></div></span></div>
<br>_______________________________________________<br>
List sponsored by Redwood Alliance<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change listserver email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html" target="_blank">http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out or update participant bios:<br>
<a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br></blockquote></div><br></div>