<div dir="ltr"><div class="gmail_default" style="font-family:verdana,sans-serif">See my other response, but you should definitely consider SolaDeck in this case. You want SolaDeck Model 0786-41. Make sure you order the correct breakers, bus bars, and Neutral terminal block.</div>
<div class="gmail_default" style="font-family:verdana,sans-serif"><br></div><div class="gmail_default"><font face="verdana, sans-serif"><a href="http://www.rstcenterprises.com/soladeck/products/1741_combiner_enclosure.phtml" target="_blank">http://www.rstcenterprises.com/soladeck/products/1741_combiner_enclosure.phtml</a></font><br>
</div><div><br></div><div><div class="gmail_default" style="font-family:verdana,sans-serif">The attached picture is the Soladeck on my 3-string Enphase system at home (note: neutral block was not on DIN rail yet). There are four neutrals on the bottom of the N block because I center-fed one inverter string, so I had four sets of Enphase cable coming into the box, which is admittedly a little tight. If you need to do this, I recommend transitioning to THWN in a separate combiner and just bringing in three strings through one or two conduits.</div>
<br></div><div><br></div><div class="gmail_default" style="font-family:verdana,sans-serif"><img src="cid:ii_1458f36964cff11d" alt="Inline image 1" width="242" height="236"></div><br><br><div><div style="font-size:13px;font-family:Verdana,Arial,Helvetica,sans-serif">
<div style="margin:0px 0px 8px"><p style="margin:0px"><span><span>Jason Szumlanski</span></span></p>
<p style="margin:0px"><span><span></span></span></p><div class="gmail_default" style="font-family:verdana,sans-serif;display:inline">Fafco Solar</div><br><p></p><div style="clear:both"></div></div><br></div></div><div id="WISESTAMP_SIG_gmail_session">
<div style="font-size:13px;font-family:Verdana,Arial,Helvetica,sans-serif"><div style="margin:0px 0px 8px"><div style="clear:both"></div></div><img src="https://wisestamp.appspot.com/pixview.gif?p=chrome&v=3.31.0&t=1398266913442&u=d0c775731865b324" width="1" height="1"></div>
</div></div><div class="gmail_extra"><br><br><div class="gmail_quote">On Wed, Apr 23, 2014 at 11:17 AM, Kirpal Khalsa <span dir="ltr"><<a href="mailto:solarworks@gmail.com" target="_blank">solarworks@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Drake.....we want it to mount flush to the slope of a sloped roof....The NEMA 3R are supposed to be mounted vertically....This is for a large residential Enphase system and we wanted to combine the circuits on the roof and bring one set of conductors down.....<div>
I did find one custom made by Eaton(Cutler Hammer), but....$952 my cost is too much..I have had them make me one out of fiberglass in the past but it is about 3 years into its roof mount life and showing signs of UV degradation...looking for other options....I think i will dig a little deeper at Midnite Solar.....They may have something....Theirs and Outback's PV combiners are rated to be mounted at a slope....i think it is down to 14 degrees pitch (3/12)</div>
<div>Thanks.</div></div><div class="gmail_extra"><br clear="all"><div><div dir="ltr"><div class="">Sunny Regards,<br>Kirpal Khalsa<br>NABCEP Certified PV Installation Professional<br>Renewable Energy Systems<br><a href="http://www.oregonsolarworks.com" target="_blank">www.oregonsolarworks.com</a><br>
</div><a href="tel:541-218-0201" value="+15412180201" target="_blank">541-218-0201</a> m<br><a href="tel:541-299-0402" value="+15412990402" target="_blank">541-299-0402</a> o</div></div><div><div class="h5">
<br><br><div class="gmail_quote">On Wed, Apr 23, 2014 at 8:11 AM, Drake <span dir="ltr"><<a href="mailto:drake.chamberlin@redwoodalliance.org" target="_blank">drake.chamberlin@redwoodalliance.org</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div>
That would be a nice piece of hardware. Is there any reason you can't use
a NEMA 3R panel? They are used on roofs quite a bit, and are
readily available. The Square D, 8 space, outdoor box should work
in most rooftop environments for the purpose you describe.
<br><div><br>
At 06:18 PM 4/21/2014, you wrote:<br>
</div><blockquote type="cite">Hello Friends!<br>
Anyone have a lead for<u> NEMA 4x</u> stainless load centers (electrical
panel)? Â Looking for 4 circuit version rated at about 60-100A @
240VAC.<div><br>
Would like to use it for rooftop combiner for 3 Enphase inverter output
circuits.<br>
Thank you!!<br><br>
Sunny Regards,<br>
Kirpal Khalsa<br>
NABCEP Certified PV Installation Professional<br>
Renewable Energy Systems<br>
<a href="http://www.oregonsolarworks.com" target="_blank">www.oregonsolarworks.com</a><br>
<a href="tel:541-218-0201" value="+15412180201" target="_blank">541-218-0201</a><br><br></div>
_______________________________________________<br>
List sponsored by Home Power magazine<br><br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br><br>
Change email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches..org" target="_blank">
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a>
<br><br>
List-Archive:
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank">
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">
www.re-wrenches.org/etiquette.htm</a><br><br>
Check out participant bios:<br>
<a href="http://www.members.re-wrenches.org/" target="_blank">
www.members.re-wrenches.org</a></blockquote></div>
<br>_______________________________________________<br>
List sponsored by Home Power magazine<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches..org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out participant bios:<br>
<a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br></blockquote></div><br></div></div></div>
<br>_______________________________________________<br>
List sponsored by Home Power magazine<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches..org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out participant bios:<br>
<a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br></blockquote></div><br></div>