<div dir="ltr">Drake.....we want it to mount flush to the slope of a sloped roof....The NEMA 3R are supposed to be mounted vertically....This is for a large residential Enphase system and we wanted to combine the circuits on the roof and bring one set of conductors down.....<div>
I did find one custom made by Eaton(Cutler Hammer), but....$952 my cost is too much..I have had them make me one out of fiberglass in the past but it is about 3 years into its roof mount life and showing signs of UV degradation...looking for other options....I think i will dig a little deeper at Midnite Solar.....They may have something....Theirs and Outback's PV combiners are rated to be mounted at a slope....i think it is down to 14 degrees pitch (3/12)</div>
<div>Thanks.</div></div><div class="gmail_extra"><br clear="all"><div><div dir="ltr">Sunny Regards,<br>Kirpal Khalsa<br>NABCEP Certified PV Installation Professional<br>Renewable Energy Systems<br><a href="http://www.oregonsolarworks.com" target="_blank">www.oregonsolarworks.com</a><br>
541-218-0201 m<br>541-299-0402 o</div></div>
<br><br><div class="gmail_quote">On Wed, Apr 23, 2014 at 8:11 AM, Drake <span dir="ltr"><<a href="mailto:drake.chamberlin@redwoodalliance.org" target="_blank">drake.chamberlin@redwoodalliance.org</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div>
That would be a nice piece of hardware. Is there any reason you can't use
a NEMA 3R panel?  They are used on roofs quite a bit, and are
readily available.  The Square D, 8 space, outdoor box should work
in most rooftop environments for the purpose you describe. 
<br><div class=""><br>
At 06:18 PM 4/21/2014, you wrote:<br>
</div><blockquote type="cite">Hello Friends!<br>
Anyone have a lead for<u> NEMA 4x</u> stainless load centers (electrical
panel)? Â Looking for 4 circuit version rated at about 60-100A @
240VAC.<div class=""><br>
Would like to use it for rooftop combiner for 3 Enphase inverter output
circuits.<br>
Thank you!!<br><br>
Sunny Regards,<br>
Kirpal Khalsa<br>
NABCEP Certified PV Installation Professional<br>
Renewable Energy Systems<br>
<a href="http://www.oregonsolarworks.com" target="_blank">www.oregonsolarworks.com</a><br>
<a href="tel:541-218-0201" value="+15412180201" target="_blank">541-218-0201</a><br><br></div>
_______________________________________________<br>
List sponsored by Home Power magazine<br><br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br><br>
Change email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a>
<br><br>
List-Archive:
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank">
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">
www.re-wrenches.org/etiquette.htm</a><br><br>
Check out participant bios:<br>
<a href="http://www.members.re-wrenches.org/" target="_blank">
www.members.re-wrenches.org</a></blockquote></div>

<br>_______________________________________________<br>
List sponsored by Home Power magazine<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out participant bios:<br>
<a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br></blockquote></div><br></div>