<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<div class="moz-cite-prefix">We've made up mounting brackets with
unistrut for this purpose as well. We just bend their regular 45
deg angle brackets to match the roof tilt. It's a bit of work
though, so we are going to other solutions like the Soladek, or
just putting the combiner box in a different location.<br>
<pre class="moz-signature" cols="72">R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760</pre>
On 11/9/2013 11:01 AM, Drake wrote:<br>
</div>
<blockquote cite="mid:20131109181955.6A2DBFFC6@che.dreamhost.com"
type="cite">
A NEMA 3R box can be mounted vertically on a sloping roof by
attaching
brackets to the sides of the box and leveling the box. The bracket
or
L-foot can allow the box to swivel to vertical. <br>
<br>
<img src="cid:part1.08030802.02060203@solarray.com" alt="Emacs!"
height="202" width="168">
<br>
<br>
<br>
At 09:33 AM 11/8/2013, you wrote:<br>
<br>
<blockquote type="cite" class="cite" cite=""><font size="2">Hi
Kirpal,</font>
<br>
<tt><font face="Courier New, Courier" size="2">All Square D
safety switches
are UL tested in the Vertical position ONLY, </font></tt><br>
<tt><font face="Courier New, Courier" size="2">so if someone is
trying to
install a switch in any other position other </font></tt><br>
<tt><font face="Courier New, Courier" size="2">than vertical,
that will be
between them and the inspector. Hope this
helps</font></tt><font size="2">.</font> <br>
<font size="2">Eric<br>
</font><font color="#008000">
_____________________________________________________________________________________</font>
<br>
<font size="1"><b><br>
Eric Bentsen</b> | </font><font color="#008000" size="1"><b>
Schneider Electric </b></font><b><font size="1"> | Solar
Business</font></b><font size="1"> | <b>UNITED STATES</b>
|
<b>Technical Support Representative</b> <b><br>
Phone:</b> +(650) 351-8237 ext. 001# | <b><br>
Email:</b>
</font><a moz-do-not-send="true"
href="mailto:eric.bentsen@schneider-electric.com">
<font color="#0000FF" size="1"><u>eric.bentsen@schneider-electric.com</u></font></a><font
color="#0000FF" size="1"><u>
</u></font><font size="1"> |
<b>Site:</b></font>
<a moz-do-not-send="true"
href="http://www.schneider-electric.com/solar"
eudora="autourl">
<font color="#0000FF" size="1"><u>
</u></font></a><font color="#0000FF" size="1"><u><a
moz-do-not-send="true"
href="http://www.schneider-electric.com/solar"
eudora="autourl">
www.schneider-electric.com/solar</a></u></font><font
size="1">
| <b>Address:</b> 250 South Vasco Rd., Livermore, CA 94551
<br>
</font><font color="#0000FF" size="1"><u><br>
</u></font><a moz-do-not-send="true"
href="www.schneider-electric.htm">
<img src="cid:part5.08070004.05090700@solarray.com" alt="[]"
height="77" width="468">
</a><font color="#00A000" size="1"><br>
*** Please consider the environment before printing this
e-mail</font><font size="1"> </font><br>
<br>
<br>
<br>
<font color="#5F5F5F" size="1">From:</font> <font size="1">Kirpal
Khalsa
<a class="moz-txt-link-rfc2396E" href="mailto:solarworks@gmail.com"><solarworks@gmail.com></a></font> <br>
<font color="#5F5F5F" size="1">To:</font> <font size="1">RE-wrenches
<a class="moz-txt-link-rfc2396E" href="mailto:re-wrenches@lists.re-wrenches.org"><re-wrenches@lists.re-wrenches.org></a></font> <br>
<font color="#5F5F5F" size="1">Date:</font> <font size="1">11/07/2013
01:42
PM</font> <br>
<font color="#5F5F5F" size="1">Subject:</font> <font size="1">[RE-wrenches]
Square
D Disconnects mounted on the slope of the roof.</font> <br>
<font color="#5F5F5F" size="1">Sent by:</font>
<font size="1"><a class="moz-txt-link-abbreviated" href="mailto:re-wrenches-bounces@lists.re-wrenches.org">re-wrenches-bounces@lists.re-wrenches.org</a></font>
<br>
<br>
<br>
<br>
<br>
<br>
Hi Folks!!! <br>
Anyone aware of minimum slope requirements for Square D 321RB
disconnects....Can they be mounted on rails parallel to the
slope of the
roof like Outback and Midnite solar combiner boxes(down to a
3/12 pitch)
<br>
I can't seem to find any notes stating the limitations in
manufacturer
documentation...... They are NEMA 3 of course.... <br>
Thanks in advance for any direction you can provide.... <br>
<br>
Sunny Regards,<br>
Kirpal Khalsa<br>
NABCEP Certified PV Installation Professional<br>
Renewable Energy Systems<font color="#0000FF"><u><br>
<a moz-do-not-send="true"
href="http://www.oregonsolarworks.com/">www.oregonsolarworks.com</a>
</u></font><br>
541-218-0201 m<br>
541-592-3958 o <br>
<br>
<br>
<br>
<br>
<br>
______________________________________________________________________<br>
This email has been scanned by the Symantec Email Security.cloud
service.<br>
______________________________________________________________________<tt>
<font face="Courier New, Courier" size="2">
_______________________________________________<br>
List sponsored by Home Power magazine<br>
<br>
List Address: <a class="moz-txt-link-abbreviated" href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change email address & settings:<br>
<a moz-do-not-send="true"
href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a>
<br>
<br>
List-Archive:
<a moz-do-not-send="true"
href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a moz-do-not-send="true"
href="www.re-wrenches.org/etiquette.htm">
www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out participant bios:<br>
<a moz-do-not-send="true" href="www.members.re-wrenches.htm">www.members.re-wrenches.org</a><br>
<br>
</font></tt><br>
<br>
<br>
<br>
_______________________________________________<br>
List sponsored by Home Power magazine<br>
<br>
List Address: <a class="moz-txt-link-abbreviated" href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change email address & settings:<br>
<a moz-do-not-send="true"
href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org"
eudora="autourl">
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a>
<br>
<br>
List-Archive:
<a moz-do-not-send="true"
href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org"
eudora="autourl">
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a moz-do-not-send="true"
href="http://www.re-wrenches.org/etiquette.htm"
eudora="autourl">
www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out participant bios:<br>
<a moz-do-not-send="true"
href="http://www.members.re-wrenches.org/" eudora="autourl">
www.members.re-wrenches.org</a></blockquote>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
List sponsored by Home Power magazine
List Address: <a class="moz-txt-link-abbreviated" href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a>
Change email address & settings:
<a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a>
List-Archive: <a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a>
List rules & etiquette:
<a class="moz-txt-link-abbreviated" href="http://www.re-wrenches.org/etiquette.htm">www.re-wrenches.org/etiquette.htm</a>
Check out participant bios:
<a class="moz-txt-link-abbreviated" href="http://www.members.re-wrenches.org">www.members.re-wrenches.org</a>
</pre>
</blockquote>
<br>
</body>
</html>