<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=ISO-8859-1">
</head>
<body text="#009900" vlink="#551a8b" alink="#ee0000" bgcolor="#ffffff"
link="#0000ee">
<font size="+1"><font face="Arial">this question is part 2 about the
customer with the used astropower 75 watt modules -<br>
<br>
he has a grundfos 11sqf-2 already set by the well driller. the
input specifications for the cu200 pump & controller are 30
to 300 vdc, 1400 watts, 8 amps. <br>
<br>
this will initially be running array direct and i am trying to
figure out the wire loss from the modules to the cu200
controller. to do that i need voltage and current numbers. im
assuming the higher the voltage the lower the running current? <br>
from the specs above: 1400 watts divided by 8 amps = 175
volts... so if i feed this with closer to 300 volts would that
mean the running current would drop to around 4.6 amps?<br>
<br>
thanks for the help,<br>
<br>
todd<br>
<br>
<br>
</font></font>
</body>
</html>