<p dir="ltr">Don<br>
Actually Very High Bond (VHB) foam tapes are incredibly strong and if formulated for glass, will work quite well. They have been using it for decades to mount heavy glass and aluminum panels on curtain walls on sky scrapers. I would trust it totally as long as it was not bought at HomeDepot. I have tested it with heavy loads and the aluminum frame failed before the tape and glass module!</p>
<p dir="ltr">Bill</p>
<p dir="ltr">Bill</p>
<div class="gmail_quote">On May 30, 2013 7:58 PM, <<a href="mailto:don@energysolarnow.com">don@energysolarnow.com</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div><span style="font-size:10pt;font-family:Verdana"><div>I would not trust adhesive on the backs of panels for decades. This would be especially a concern with tiltups or ground mounts where there is more wind loading. <br>
</div><div>When mounting some frameless BP modules I made some 4-inch long edge moldings of slotted hard foam called SeaFoam that is sold (but not manufactured) by Tap Plastics. </div><div>Then they were compatible with standard bolt-down edge- and mid-clamps.</div>
<div>Don Barch</div><div>Energy Solar<br></div><div><br>On 5/30/2013 4:14 PM, Todd Cory wrote:<br>
wrenches,<br>
<br>
i have a customer who purchased 20 used astropower ap75
modules. they are frameless and appear to have been previously
mounted using four, 2" wide X 10" long strips of blue rigid
foam, glued to the back of each module with some kind of
adhesive.<br>
<br>
two questions:<br>
<br>
this seems to be a reasonable mounting system id like to
repeat. would anyone familiar with this kind of mounting
technique be willing to comment/speculate on an adhesive that
would not degrade the tedlar backsheet? whatever was
previously used worked great.<br>
<br>
what kind of flat/smooth mounting surface would folks suggest
the other side of the blue foam be attached to? the only thing
i can think of is plywood, but that would rot over time.<br>
<br>
thanks,<br>
<br>
todd<br></div></span></div>
<br>_______________________________________________<br>
List sponsored by Home Power magazine<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Change email address & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out participant bios:<br>
<a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br></blockquote></div>