<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<div class="moz-cite-prefix">Jason,<br>
<br>
The M190 requires using a 15-amp (maximum) branch circuit. As long
as the total current from both types of inverters doesn't exceed
12 amps (80% of 15), there should not be a problem in mixing the
inverters. The combination you are proposing is only 8.6 amps --
it should be fine.<br>
<pre class="moz-signature" cols="72">Kent Osterberg
Blue Mountain Solar, Inc.
<a class="moz-txt-link-abbreviated" href="http://www.bluemountainsolar.com">www.bluemountainsolar.com</a>
</pre>
On 5/18/2013 3:26 PM, Jason Szumlanski wrote:<br>
</div>
<blockquote
cite="mid:5460FD315F814296B54F904A50C13BDE@fafcosolar.com"
type="cite">
<div id="reply-content"> Is there any reason I can't do this? I
have an existing string of 3 M190's and want to add 7 M215's. I
plan to tie into the same j-box, which has #10 going to a
fusible disconnect and a supply side tap. I'll just have to
change the fuse rating. </div>
<div id="reply-content"><br>
</div>
<div id="reply-content">Any comm issues reported with this setup?</div>
<div id="F1903E78041B4AFAA23ADE4FF6BBCD04">
<div><br>
</div>
Jason Szumlanski<br>
Fafco Solar<br>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
List sponsored by Home Power magazine
List Address: <a class="moz-txt-link-abbreviated" href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a>
Change email address & settings:
<a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a>
List-Archive: <a class="moz-txt-link-freetext" href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a>
List rules & etiquette:
<a class="moz-txt-link-abbreviated" href="http://www.re-wrenches.org/etiquette.htm">www.re-wrenches.org/etiquette.htm</a>
Check out participant bios:
<a class="moz-txt-link-abbreviated" href="http://www.members.re-wrenches.org">www.members.re-wrenches.org</a>
</pre>
</blockquote>
<br>
</body>
</html>