<div dir="ltr"><div><div><div><div>Hi all,<br><br></div>I know the <span style="background:none repeat scroll 0% 0% yellow" class="">BP</span> <span style="background:none repeat scroll 0% 0% yellow" class="">SX</span> module failure has come up often on past posts, but I was wondering if anyone has seen the failures effecting the systems inverters.  I have inherited several systems from an installer who is no longer in the area.  I have been picking up the task of replacing the failed/or failing modules over the last few years.  The two catastrophic failures of the modules I have seen (melted j-boxes, and spidered glass) have also been connected to a inverter (2 different models) that has failed.  The <span style="background:none repeat scroll 0% 0% yellow" class="">OCP</span> has checked out, ground fault fuses intact, no evidence of hot/melted wires (other than the failed mods).  This could be coincidence , or not?  Questions of replacing the inverter, and having the remaining modules still in service is a concern.  Just seeing if any of you have seen anything similar. Also  wondering if anyone has some insight unto trying to test mods that don't have the signature burn marks, or <span style class="">come</span> up with a compelling case for a full array replacement.  It seems my last <span style="background:none repeat scroll 0% 0% yellow" class="">BP</span> contact is no longer with them, and not sure how this round will turn out.  <br>
<br></div>Thanks,<br><br></div>Jay <span style="background:none repeat scroll 0% 0% yellow" class="">Poz</span><br></div><a href="http://www.nunatakenergy.com" target="_blank">www.nunatakenergy.com</a><br>
<a href="tel:970-349-3432" value="+19703493432" target="_blank">970-349-3432</a><br>NABCEP Certified PV Installer:<br>
Cert.#031310-177<br>IREC Affiliated Instructor<div><br>
</div></div>