Hello,<div><br></div><div>The roof I'm currently working on is not a typical roof.  The construction is as follows:</div><div><br></div><div>2"x6" tongue and groove exposed inside, with 4 inches of foam (blue board) and on top of that 3/4" plywood with asphalt shingles on top of that.</div>
<div><br></div><div>I'd like to make a template to ensure that my pilot bit doesn't wander when I'm going through the blue board.  If I miss the beams inside, the hole or the lag would be exposed.  </div><div>
<br></div><div>Anybody run across this? Ideas?  I thought of maybe using a qucikmount flashing, with a short section of EMT attached to help guide the bit....</div><div><br></div><div>Thanks!</div><div><br></div><div>Jesse</div>