<html>
<body>
Jason:<br><br>
I will let you run the calcs or call the manufacturers to verify the
concept works with these modules, but consider putting two in series into
one inverter. I rescued a Vanner install with SR100s by removing
the Vanner and doubling up the SR100s.<br><br>
William<br><br>
<br><br>
At 11:38 AM 9/14/2012, you wrote:<br>
<blockquote type=cite class=cite cite>I should have mentioned it is the
ES-195-RL. I was under the impression that this module was not
microinverter compatible due to it's lower operating voltage. Aren't
Enphase micros limited to 60 or 72 cell modules (or multiples of 60 like
the 120 cell Evergreen -FC3)?<br><br>
The ES-195-RL specs:<br><br>
Vmp 27.1<br>
Imp 7.2<br>
Voc 32.9<br>
Isc 8.18<br>
Cells 108<br><br>
<br>
<b>Jason Szumlanski<br>
</b><br>
<i>Fafco Solar<br>
</i><br><br>
On Fri, Sep 14, 2012 at 2:02 PM, William Miller
<<a href="mailto:william@millersolar.com">william@millersolar.com</a>>
wrote:<br>
<dl>
<dd>Jason:<br><br>
<dd>Just about any inverter that starts with the word
"micro."<font color="#888888"><br><br>
<dd>William</font><br><br>
<br><br>
<br>
<dd>At 10:52 AM 9/14/2012, you wrote:<br>
<blockquote type=cite class=cite cite>
<dd>I'm running into a scenario where some customers have three or four
Evergreen ES-195 modules already mounted on their roof that were used for
a non-grid-tie application, and now want to convert them to a grid-tied
system. I looked at the Sunny Boy 700 only to find out it will not be
suitable. Anyone know of a small grid-tie inverter that could result in a
cost effective way to "salvage" these modules on the
roof?<br><br>
<dd>Jason Szumlanski</b> </i></blockquote><br>
<dd>_______________________________________________<br>
<dd>List sponsored by Home Power magazine<br><br>
<dd>List Address:
<a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br><br>
<dd>Options & settings:<br>
<dd><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br><br>
<dd>List-Archive:
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br><br>
<dd>List rules & etiquette:<br>
<dd><a href="http://www.re-wrenches.org/etiquette.htm">www.re-wrenches.org/etiquette.htm</a><br><br>
<dd>Check out participant bios:<br>
<dd><a href="http://www.members.re-wrenches.org">www.members.re-wrenches.org</a><br><br>
<br>
</dl><br><br>
<br>
_______________________________________________<br>
List sponsored by Home Power magazine<br><br>
List Address: RE-wrenches@lists.re-wrenches.org<br><br>
Options & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" eudora="autourl">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br><br>
List-Archive:
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" eudora="autourl">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br><br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" eudora="autourl">www.re-wrenches.org/etiquette.htm</a><br><br>
Check out participant bios:<br>
<a href="http://www.members.re-wrenches.org/" eudora="autourl">www.members.re-wrenches.org</a></blockquote>
<x-sigsep><p></x-sigsep>
Miller Solar<br>
Voice :805-438-5600<br>
email: william@millersolar.com<br>
<a href="http://millersolar.com/" eudora="autourl">http://millersolar.com<br>
</a>License No. C-10-773985<br>
</body>
</html>