Yep... the owner wondered why they fuses didn't blow earlier. I had to explain that the panels are at 5% tilt and here in SW FL the sun rises to 85 degrees above the horizon come summer. There was never a problem in the winter and spring!<div>



<br></div><div>The 7.69 Imp per string should have been the obvious tip-off.  2 x 7.69 = >15A.</div><div><br></div><div>36A max on the combined input terminal is a nice feature. As soon as I saw the 30A discos next to the inverters I wondered why they were landing on the fused inputs. Without the 1-line in my hand, that was a good tip-off, too.</div>

<div><div><br clear="all">Jason Szumlanski<div>

Fafco Solar<br></div><br>
<br><br><div class="gmail_quote">On Thu, Aug 30, 2012 at 2:35 PM, Andrew Truitt <span dir="ltr"><<a href="mailto:atruitt@gmail.com" target="_blank">atruitt@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">



<br>Ahh yes, the old "combine strings before landing on a fused DC input terminal" trick.  Sure to blow the fuse the first sunny day.  This is why SMA created their fuse-bypass DC input terminal.  I take it the installer was not aware of this...<br>





<br><br><div><br></div><div><div><p class="MsoNormal"><span style="color:rgb(0,102,0)">For a brighter energy future,<br>
<br><br>Andrew Truitt <br>NABCEP Certified PV Installer</span><span style="font-size:10pt;font-family:Arial,sans-serif;color:rgb(0,102,0)">™</span><span style="color:rgb(0,102,0)"> (ID# 032407-66)</span><u></u><u></u></p>








</div><div><p class="MsoNormal"><span style="color:rgb(0,102,0)">Principal<br>Truitt Renewable Energy Consulting</span><u></u><u></u></p></div><div><p class="MsoNormal"><span style="color:rgb(0,102,0)"><a href="tel:%28202%29%20486-7507" target="_blank"><span style="color:rgb(17,85,204)">(202) 486-7507</span></a></span><u></u><u></u></p>








</div><p class="MsoNormal"><span style="color:rgb(20,125,186)"><a href="http://www.linkedin.com/pub/andrew-truitt/8/622/713" target="_blank">http://www.linkedin.com/pub/andrew-truitt/8/622/713</a></span></p></div>
<br>
<br><br><br><div class="gmail_quote"><div><div>On Thu, Aug 30, 2012 at 11:53 AM, Jason Szumlanski <span dir="ltr"><<a href="mailto:jason@fafcosolar.com" target="_blank">jason@fafcosolar.com</a>></span> wrote:<br>
</div></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><div>


<div>I was sent to look at another contractor's work, and found three SB5000 inverters with blown string input fuses. I was able to determine the reason pretty quickly, and was later sent the original 1-Line, which was installed per the drawings. The 1-Line came from a "leading system integrator" who shall remain nameless.</div>








<div><br></div><div>See anything wrong?</div><div><br></div><div><a href="https://www.sugarsync.com/pf/D6539806_8669786_010829" target="_blank">https://www.sugarsync.com/pf/D6539806_8669786_010829</a></div><div><br></div>






<div>Just goes to show you - the contractor needs to take responsibility and verify the specifications are correct, safe, and code compliant.</div><span><font color="#888888">

<br clear="all">Jason Szumlanski<div>Fafco Solar</div>
</font></span></div></div></blockquote></div></blockquote></div><br></div></div>