<html><head></head><body style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; color: rgb(0, 0, 255); font-size: 14px; font-family: Capitals, sans-serif; "><div><div><div>Wrenches,</div><div>Have any of you noticed that when using Enphase inverters on the conergy suntop rails and using weeb clips, that the inverters can only be installed facing in one direction in regards to the rails? Otherwise there is only contact between 3 of the 4 teeth on the weeb clip.</div><div>It seems to me that the inverter needs to be installed on the opposite side of the rail that the roof attachment mounting quickstone slot is located. This is a pretty important piece of info to know BEFORE mounting the rails and then installing the engage cable, before you figure this detail out the hard way.</div><div>I don't see this detail mentioned in the Suntop, Enphase or Weeb install manuals, however in a related note I did come across this >>><a href="http://www.we-llc.com/WEEB_problems.html">Important Notes</a> about incompatibility with weebs and some modules. FYI.</div><div><br></div><div>For a while I was thinking it was a puzzle where I had to align the three pieces right to get them to fit properly, but try as I might I could only get it to work if the inverter was facing in one particular direction <b>and</b> located midway on the mounting bolt. </div><div>Has anyone else picked up on this?</div><div><br></div><div>benn</div><div><br></div><div><div><div>DayStar Renewable Energy Inc. </div><div>www.daystarsolar.ca * Ph: 780-906-7807 </div><div>Construction Electrician Solar Photovoltaic Systems Certified</div><div>Certificate # 0007S</div><div>HAVE A SUNNY DAY</div></div></div></div></div></body></html>