I've never had that luxury, generally the underside is visible and can't be changed. We get through but it's a pain.<br><br><div class="gmail_quote">On Wed, Jul 4, 2012 at 8:36 PM, benn kilburn <span dir="ltr"><<a href="mailto:benn@daystarsolar.ca" target="_blank">benn@daystarsolar.ca</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div style="word-wrap:break-word;color:rgb(0,0,255);font-size:14px;font-family:Capitals,sans-serif"><div><div><div>Chris,</div>
<div>I'm pretty sure that what David means by "blocking" is if the roof has rafters (peak to eave) rather than purlins (horizontal) then, IF you can access the underside of the roof, you properly install 'blocking' (2x4, 2x6, 2x8) against the underside of the roof sheathing, perpendicular to the rafters. Then you can drill your bolt anywhere along the blocking which then eliminates the restriction of having to attach to a rafter every 16-24". Keep in mind that there are proper methods of doing this to make sure the blocking is properly attached to the rafters, otherwise any uplift pressure from the array is only supported by the roof material and not the structure (rafters/purlins)</div>
<div><br></div><div>Then again, access to the underside of the roof is not always available or is restrictive, so this is an important factor to figure out before you land on site with your roof attachments and racking, ready to go. </div>
<div><br></div><div>Cheers,</div><div>benn</div><div><br></div><div><div><div class="im"><div>DayStar Renewable Energy Inc. </div><div><a href="http://www.daystarsolar.ca" target="_blank">www.daystarsolar.ca</a></div><div>
<a href="tel:780-906-7807" value="+17809067807" target="_blank">780-906-7807</a> </div></div><div class="im"><div>Construction Electrician Solar Photovoltaic Systems Certified</div><div>Certificate # 0007S</div><div>HAVE A SUNNY DAY</div>
</div></div></div></div></div><div class="im"><div><br></div><span><div><div>On 04/07/12 5:23 PM, "Chris Mason" <<a href="mailto:cometenergysystems@gmail.com" target="_blank">cometenergysystems@gmail.com</a>> wrote:</div>
</div><div><br></div>I use corrugated mounting bridges - that's the problem. If the center of the beam falls in the trough, the corrugated bridge is useless.<div>I am not sure how blocking would help. Corrugated is a pain.</div>
<div><br></div><div><br><br><div class="gmail_quote">On Wed, Jul 4, 2012 at 12:11 PM, David Brearley <span dir="ltr"><<a href="mailto:david.brearley@solarprofessional.com" target="_blank">david.brearley@solarprofessional.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">In some cases, you can install blocking to get up on the ridge consistently. One alternative to hangar bolts is to use corrugated mounting bridges from DPW Solar or something similar from another company.<br>
<br>
Sorry I can't link to the PDF. Google: "corrugated mounting bridges"<br><br>
Since exposed-fastener metal roofs already have a bunch of holes in them, you're not voiding the roof warranty by punching more holes in the ridge. (I don't think these roofs even meet the NRCA definition of a "roof assembly" because of the exposed penetrations.) Penetrations in the valleys on a roof are problematic for obvious reasons.<br>
<div><br><br>
On Jul 4, 2012, at 6:01 AM, Chris Mason wrote:<br><br>
> All of this refers to shingle roofs, which we don't see much of. We mostly deal with concrete and corrugated steel/galvalume, the latter being a nightmare. Does anyone have good ideas for dealing with corrugated? There's no way to flash it, the blocks are fine when you hit a beam on the ridge but half the time your penetration has to be on the trough of the corrugated steel.<br>
> Other than lots of goop, I don't know how else to seal it.</div></blockquote></div></div></span></div></div>
<br>_______________________________________________<br>
List sponsored by Home Power magazine<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Options & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out participant bios:<br>
<a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br></blockquote></div><br><br clear="all"><div><br></div>-- <br>Chris Mason<div>President, Comet Systems Ltd</div><div><a href="http://www.cometenergysystems.com" target="_blank">www.cometenergysystems.com</a></div><div>
Cell: 264.235.5670</div><div>Skype: netconcepts</div><br>