I can't answer your questions directly, but for the record, if you need help with the two wire start issue, call Generac and ask for Bob Cramer. He will send you a conversion kit and instructions for residential propane standby generators. If you want his  email address, contact me off list.<div>

<br clear="all">Jason Szumlanski<div>Fafco Solar</div><div><br></div>
<br><br><div class="gmail_quote">On Mon, May 7, 2012 at 2:55 PM, Jeff Yago <span dir="ltr"><<a href="mailto:jryago@dtisolar.com" target="_blank">jryago@dtisolar.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">

I have not been a fan of any Generac brand generators, especially their<br>
low-cost, highly marketed residential stand-by generators.  Although things<br>
may have changed, these were very hard to use with a typical inverter's<br>
2-wire remote start relay, most warranties were voided if used in off-grid<br>
applications, and their high speed engines just did not last as long as<br>
lower speed engines.<br>
<br>
Last year Generac came out with their smaller EcoGen 6 kW propane-fueled<br>
model that they claim was specifically designed for off-grid applications.<br>
As I understand it, this is a vertical shaft engine operating at 2600 RPM<br>
and belt-drives the generator section.  The info also claims a simple 2-wire<br>
start/stop (like Kohler) which would be a major improvement, and the output<br>
can be 100% at 120 VAC which would be a great match to a smaller single<br>
120VAC inverter off-grid solar system.<br>
<br>
However, anyone have any actual experience with this model?  Does it<br>
actually hold up to off-grid type longer operating hours?  Warranty claim<br>
issues?<br>
<br>
Do electronics require lots of standby power or a separate source to keep<br>
from discharging starter battery? (This was a complaint I had with Kohler's<br>
model changes which sucked down power in standby mode due to the added<br>
electronic monitoring panel not on earlier models.)<br>
<br>
Any maintenance issues with belt drive?  Do I finally take Generac off my<br>
"stay away from" list?<br>
<br>
Thanks,<br>
<br>
Jeff Yago<br>
DTI Solar Inc.<br>
<br>
<br>
_______________________________________________<br>
List sponsored by Home Power magazine<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Options & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out participant bios:<br>
<a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><br>
<br>
</blockquote></div><br></div>