<p>Dave,<br>
You can also change the jumper settings on the SMA,  so that it does not require a neutral.</p>
<p>Regards<br>
Carl</p>
<div class="gmail_quote">On Apr 19, 2012 2:06 PM, "Dave Palumbo" <<a href="mailto:dave@independentpowerllc.com">dave@independentpowerllc.com</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Dave,<br>
<br>
Very good. Thanks for the pick up on the 650A Service Disconnect issue.<br>
<br>
Dave Palumbo<br>
<br>
-----Original Message-----<br>
From: <a href="mailto:re-wrenches-bounces@lists.re-wrenches.org">re-wrenches-bounces@lists.re-wrenches.org</a><br>
[mailto:<a href="mailto:re-wrenches-bounces@lists.re-wrenches.org">re-wrenches-bounces@lists.re-wrenches.org</a>] On Behalf Of Dave Click<br>
Sent: Thursday, April 19, 2012 1:39 PM<br>
To: <a href="mailto:re-wrenches@lists.re-wrenches.org">re-wrenches@lists.re-wrenches.org</a><br>
Subject: Re: [RE-wrenches] Combining Solectria PVI 2500 with SB3000<br>
<br>
This is fine; your PVI2500 is rated for 10.4A, while the SB3000 is 12.5A.<br>
You can put up to 24A rated current through your 30A fuses.<br>
Though the disconnect isn't technically a service disconnect, I'd recommend<br>
using a 60A rated (fused at 30A) disconnect per 230.79(D). You would run a<br>
neutral to your combining panel and I'd recommend a "PV SYSTEM ONLY; NO LOAD<br>
CIRCUITS TO BE ADDED" placard on that. Otherwise that'll be an electrician's<br>
first choice when wiring up the new 40A hot tub.<br>
<br>
I think something like the Cutler-Hammer BR24L70RP panel may be a good fit,<br>
and it would replace your fused disconnect. It only has space for two 2P<br>
breakers (no main).<br>
<br>
On 2012/4/19 12:29, Dave Palumbo wrote:<br>
> Wrenches,<br>
><br>
> We have an installation in place since 2008 working well with a<br>
> Solectria PVI 2500 feeding a supply side grid connection.<br>
><br>
> Homeowner wants us to double the system size now. I can buy a SB3000<br>
> inverter for $ 300 less than the Solectria PVI 2500 (with upcharge for<br>
> 10 yr warranty) and I'm inclined to go with the Sunny Boy.<br>
><br>
> We would add an Inverter 240Vac combiner load center before our 30A<br>
> Fused Disconnect. I would think that it would be OK to combine the<br>
> 240vac outputs of different inverter manufacturers and sell into the<br>
> grid but never having done this I wanted to run it by you folks. The<br>
> SMA phone tech didn't seem to be the most experienced person and after<br>
> I spoke with him for a minute I had him saying that it should work fine.<br>
> But wanted to check with more experienced people.<br>
><br>
> One wrinkle is that the Solectria does not use a Neutral, but the<br>
> Sunny Boy does. Again, I don't think that this will any problem.<br>
><br>
> David Palumbo<br>
><br>
> Independent Power LLC<br>
><br>
> 462 Solar Way Drive<br>
><br>
> Hyde Park, VT 05655**<br>
><br>
> */<a href="http://www.independentpowerllc.com" target="_blank">www.independentpowerllc.com</a> /*<br>
><br>
> NABCEP Certified PV Installer<br>
><br>
> Vermont Solar Partner<br>
><br>
> 24 Years Experience, <a href="tel:%28802%29%20888-7194" value="+18028887194">(802) 888-7194</a><br>
><br>
><br>
><br>
> _______________________________________________<br>
> List sponsored by Home Power magazine<br>
><br>
> List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
><br>
> Options&  settings:<br>
> <a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
><br>
> List-Archive:<br>
> <a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
><br>
> List rules&  etiquette:<br>
> <a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
><br>
> Check out participant bios:<br>
> <a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><br>
><br>
_______________________________________________<br>
List sponsored by Home Power magazine<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Options & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive:<br>
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out participant bios:<br>
<a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><br>
<br>
_______________________________________________<br>
List sponsored by Home Power magazine<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Options & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out participant bios:<br>
<a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><br>
<br>
</blockquote></div>