<html>
<body>
<font size=3>Benn:<br><br>
You must break the bolt or cut it.<br><br>
I belive Unirac has a white paper on galling.<br><br>
We use anti-seize on any bolt we can not slide out sideways easily.
This includes any battery bolt and any non-toggle racking bolt other than
end bolts.<br><br>
William<br><br>
<br>
At 11:32 PM 6/6/2011, you wrote:<br>
<blockquote type=cite class=cite cite>So this was a first for me
today...<br><br>
I've had racking bolts gall before, but today while bolting a battery
interconnect cable on a battery post, the nut galled about 3/4 of the way
down the post. (Threaded 'bolt' posts, not single or double hole
flag posts) <br>
I've gotten pretty good about using anti-seize on all stainless racking
bolts but never considered using it on battery post bolts
before.<br><br>
I spun the nut on about half way by hand then got a couple cranks with
the wrench when the nut suddenly tightened up. Thinking that the
thread might have been damaged, i instinctively began to back it off but
got less than an eighth of a turn out of it and it was completely
seized!<br><br>
Two things...<br><br>
1) while i go re-read all my info on galling, is it common practice
amongst you battery savvy wrenches to always use anti-seize on battery
posts? I'm thinking that it is for me, now! (only on the
threads, not between the lug and the post) <br><br>
2) now that i have a nut seized 3/4 of the way down the post, and the lug
is still quite loose, what would be the best course of action?<br><br>
I did email the mfgr and am waiting for their reply, but in the meantime,
solutions i'm considering... using a hacksaw to cut the nut off and
hopefully be able to re-cut the threads, weld the lug onto the post (Bob
E., i believe you mentioned welding 'interconnects', would this be a
solution here?)... thats all i've got.<br><br>
hmmmmmm...<br>
benn<br><br>
DayStar Renewable Energy Inc. <br>
benn@daystarsolar.ca<br>
780-906-7807 <br>
HAVE A SUNNY DAY <br><br>
<br><br>
_______________________________________________<br>
List sponsored by Home Power magazine<br><br>
List Address: RE-wrenches@lists.re-wrenches.org<br><br>
Options & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" eudora="autourl">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br><br>
List-Archive:
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" eudora="autourl">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br><br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" eudora="autourl">www.re-wrenches.org/etiquette.htm</a><br><br>
Check out participant bios:<br>
<a href="http://www.members.re-wrenches.org/" eudora="autourl">www.members.re-wrenches.org</a><br><br>
No virus found in this message.<br>
Checked by AVG - <a href="'http://www.avg.com'">www.avg.com</a><br>
Version: 10.0.1375 / Virus Database: 1511/3685 - Release Date:
06/06/11</blockquote>
<x-sigsep><p></x-sigsep>
William Miller <br>
Miller Solar<br>
Voice :805-438-5600<br>
email: william@millersolar.com<br>
<a href="http://millersolar.com/" eudora="autourl">http://millersolar.com<br>
</a>License No. C-10-773985<br>
</font></body>
</html>