<html>
<body>
<font size=3>Jim:<br><br>
In the past I have screwed pipe floor flanges to a square of plywood and
slipped concrete blocks over them...<br><br>
William Miller<br><br>
<br><br>
At 09:57 AM 5/2/2011, you wrote:<br><br>
</font><blockquote type=cite class=cite cite><font face="tahoma" size=2>OSHA
compliant Wrenches<br>
we're about to begin aPV installation along the lower edge of a 100 foot
long metal building. Because of skylights down the middle of the length
of the E-W roof we are forced to mount the southern-most row only about 5
feet from the 20 foot high eave. Fortunately the slope is less than 10
degrees but perimeter warning lines are a must here.<br>
Not wanting to appear a cheapskate here but I'm not surprised at the
outrageous cost of "OSHA compliant" perimeter warning flag
systems. Your basic fold up standards with nothing more than light-weight
bases and multi-colored banner rope runs hundreds of dollars. Even
sandbags for ballast are way overpriced.<br>
So where are the affordable units available or is there such a thing?
Better yet, has someone fabricated their own pro-looking standards and
used the same off-the-shelf banner rope used in the roofing catalogs? I
already have several hundred feet of banner rope just nothing to hang it
from. <br>
</font><font size=3><br>
</font><font face="tahoma" size=2>thanks as always<br>
</font><font size=3><br>
</font><font face="tahoma" size=2>Jim Duncan<br>
North Texas Renewable Energy<br>
NABCEP Certified Solar PV<br>
Installer No.031310-57<br>
TECL 27398<br>
ntrei@1scom.net <br>
817.917.0527<br>
<a href="http://www.ntrei.com/" eudora="autourl">www.ntrei.com</a><br>
</font></blockquote></body>
</html>