<div> </div>
<div>This is what Ezra Auerbach, Executive Director of NABCEP, has to say on the matter:</div>
<div> </div>
<div> </div>
<div>Hi Nick et al,
<div><br></div>
<div>A couple of clarifications. It has always taken a month or more for NABCEP to issue score reports on installer exams. Entry Level results tend to be quicker and this might be a source for confusion.</div>
<div><br></div>
<div>I'll do my best to explain the passing score process. There is no set percentage or number of correct answers. Each exam is different from the last and is a mix of "field proven" and new questions. We use professional psychometricians for exam design and evaluation. They work with the subject matter experts on the exam committee. After each exam they all meet and review the performance of the exam with particular focus on new questions. Sometimes a question performs poorly which is to say a very high percentage of candidates who otherwise did well got it wrong. This sort of item is flagged for committee review. They sometimes decide it was a poor question and choose not to score it which is one reason for variance between exams.</div>
<div><br></div>
<div>The Psychometrician uses a well established and accepted statistical review protocol that is designed to ensure consistency across multiple exam administrations. They then present their professional recommendations to the Board for their acceptance. This again is standard procedure for "Board" exams.</div>
<div><br></div>
<div>In summary NABCEP follows well established internationally recognized scoring protocols that are fully psychometrically defensible which is part of the reason our PV Installer Certification has received accreditation by ANSI to their 17024 standard for personnel certification. We remain the only PV credentialing body in North America to have been accredited to this standard.</div>
<div><br></div>
<div>I hope this helps. To each and every Wrench who is waiting for their exam results-I hope you passed.</div>
<div><br></div>
<div>Regards,</div>
<div><br></div>
<div>Ezra </div>
<div><br></div><font color="#888888">
<div><br>Ezra Auerbach
<div>Executive Director</div>
<div>NABCEP"</div></div></font></div>
<div>
<div> </div>
<div>
<div><span style="COLOR: rgb(0,102,0)"></span> </div>
<div> </div>
<div><span style="COLOR: rgb(0,102,0)">For a brighter energy future,<br><br>Andrew Truitt</span> </div>
<div><span style="COLOR: rgb(0,102,0)">Principal</span><span style="COLOR: rgb(0,102,0)"><br></span><span style="COLOR: rgb(0,102,0)">Truitt</span><span style="COLOR: rgb(0,102,0)"> </span><span style="COLOR: rgb(0,102,0)">Renewable</span><span style="COLOR: rgb(0,102,0)"> </span><span style="COLOR: rgb(0,102,0)">Energy</span><span style="COLOR: rgb(0,102,0)"> </span><span style="COLOR: rgb(0,102,0)">Consulting</span></div>
<div><span style="COLOR: rgb(0,102,0)">NABCEP Certified PV Installer<span style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">™</span> (ID# 032407-66)</span></div>
<div><span style="COLOR: rgb(0,102,0)"></span><span style="COLOR: rgb(0,102,0)"><a href="tel:%28202%29%20486-7507" target="_blank"><a href="tel:%28202%29%20486-7507" target="_blank">(202) 486-7507</a></a></span></div>
<div><span style="COLOR: rgb(0,102,0)"></span><a href="http://www.linkedin.com/pub/andrew-truitt/8/622/713" target="_blank"><font color="#147dba">http://www.linkedin.com/pub/andrew-<span>truitt</span>/8/622/713</font></a><br>
<br><font color="#147dba"><img title="24 copy.jpg" alt="24 copy.jpg" src="cid:ii_12c39a5f9f3ba831"><br><br></font>"Don't get me wrong: I love nuclear energy! It's just that I prefer fusion to fission. And it just so happens that there's an enormous fusion reactor safely banked a few million miles from us. It delivers more than we could ever use in just about 8 minutes. And it's wireless!"<br>
<br>~William McDonough<br></div><br></div></div>
<div><br><br> </div>
<div class="gmail_quote">On Thu, Mar 31, 2011 at 11:35 AM, <span dir="ltr"><<a href="mailto:wirewiz@gmail.com">wirewiz@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
<div style="WORD-WRAP: break-word">Nick,
<div><br></div>
<div>The passing grade is 70, they don't change that. I think they just wan't to see if any one question was consistently answered wrong and so maybe there was a problem with the question and they may decide that everyone gets that question right. I would guess that rarely happens.</div>
<div><br></div>
<div>As far as the six weeks to wait for pass/fail notification, they keep you hangin! </div>
<div><br></div>
<div>They notify you by snail mail, not email. Hint: if the plain brown envelope says "do not bend" on it, pop the champagne, you passed. </div>
<div><br>
<div><span style="WORD-SPACING: 0px; FONT: medium Helvetica; TEXT-TRANSFORM: none; COLOR: rgb(0,0,0); TEXT-INDENT: 0px; WHITE-SPACE: normal; LETTER-SPACING: normal; BORDER-COLLAPSE: separate"><span style="WORD-SPACING: 0px; FONT: medium Helvetica; TEXT-TRANSFORM: none; COLOR: rgb(0,0,0); TEXT-INDENT: 0px; WHITE-SPACE: normal; LETTER-SPACING: normal; BORDER-COLLAPSE: separate"><span style="WORD-SPACING: 0px; FONT: medium Helvetica; TEXT-TRANSFORM: none; COLOR: rgb(0,0,0); TEXT-INDENT: 0px; WHITE-SPACE: normal; LETTER-SPACING: normal; BORDER-COLLAPSE: separate">
<div style="WORD-WRAP: break-word"><span style="WORD-SPACING: 0px; FONT: 12px Helvetica; TEXT-TRANSFORM: none; COLOR: rgb(0,0,0); TEXT-INDENT: 0px; WHITE-SPACE: normal; LETTER-SPACING: normal; BORDER-COLLAPSE: separate">
<div style="WORD-WRAP: break-word"><span style="WORD-SPACING: 0px; FONT: 12px Helvetica; TEXT-TRANSFORM: none; COLOR: rgb(0,0,0); TEXT-INDENT: 0px; WHITE-SPACE: normal; LETTER-SPACING: normal; BORDER-COLLAPSE: separate">
<div style="WORD-WRAP: break-word"><span style="WORD-SPACING: 0px; FONT: 12px Helvetica; TEXT-TRANSFORM: none; COLOR: rgb(0,0,0); TEXT-INDENT: 0px; WHITE-SPACE: normal; LETTER-SPACING: normal; BORDER-COLLAPSE: separate">
<div style="WORD-WRAP: break-word">
<div>Larry Liesner</div>
<div>Wirewiz</div>
<div>Westport, CT</div>
<div>Phone: <a href="tel:203-644-2404" target="_blank" value="+12036442404">203-644-2404</a></div>
<div>Fax: <a href="tel:203-557-0556" target="_blank" value="+12035570556">203-557-0556</a></div>
<div><a href="mailto:wirewiz@gmail.com" target="_blank">wirewiz@gmail.com</a></div>
<div><a href="http://www.wire-wiz.com/" target="_blank">www.wire-wiz.com</a></div>
<div><span style="FONT-SIZE: medium"><br></span></div></div></span></div></span></div></span></div></span></span></span><br></div>
<div>
<div></div>
<div class="h5"><br>
<div>
<div>On Mar 31, 2011, at 12:37 PM, Jamie Johnson wrote:</div><br>
<blockquote type="cite">
<div bgcolor="#FFFFFF">
<div>That sounds about right, a NABCEP board member told me they meet and vote on the difficulty of each question.</div>
<div><br></div>
<div>So 5-7 weeks of wondering if you have what it takes to pass.........</div>
<div><br></div>
<div>When you get the email notification it will say "congratulations" or something to that effect in the subject line when you pass, not sure what it says if you don't.</div>
<div><br>
<div><span><br></span></div>
<div><span>Jamie Johnson</span></div>
<div><span>NABCEP Certified Solar PV Installer</span></div>
<div><span>NABCEP Certified PV Technical Sales Professional</span></div>
<div><span><br></span></div>
<div><span>General Manager</span></div>
<div><span>SOLAR POWER ELECTRIC</span></div>
<div><span><a href="tel:%28941%29%20380%20-%200098" target="_blank" value="+19413800098">(941) 380 - 0098</a></span></div>
<div><span>EC13001765</span></div>
<div><span><a href="http://www.spefl.com/" target="_blank">www.SPEFL.com</a></span></div>
<div><span><br></span></div>
<div><span>Sent from my iPhone</span><br></div></div>
<div><br>On Mar 31, 2011, at 11:42 AM, Nick Soleil <<a href="mailto:nicksoleilsolar@yahoo.com" target="_blank">nicksoleilsolar@yahoo.com</a>> wrote:<br><br></div>
<div></div>
<blockquote type="cite">
<div>
<div style="FONT-SIZE: 12pt; FONT-FAMILY: arial,helvetica,sans-serif">Hi wrenches:<br> I sat for the NABCEP exam last weekend, and was surprised yesterday to hear that we will not receive the exam results for another month! I had heard that it only took a week. What was your experience. Also, the e-mail yesterday said that the Board has to decide what grade will be a passing grade? Can that be true? Does the grade get set to control the number who pass or fail? That doesn't seem right.<br>
<div> </div>Nick Soleil<br>Project Manager<br>Advanced Alternative Energy Solutions, LLC<br>PO Box 657<br>Petaluma, CA 94953<br>Cell: <a href="tel:707-321-2937" target="_blank" value="+17073212937">707-321-2937</a><br>Office: <a href="tel:707-789-9537" target="_blank" value="+17077899537">707-789-9537</a><br>
Fax: <a href="tel:707-769-9037" target="_blank" value="+17077699037">707-769-9037</a>
<div><br></div>
<div style="FONT-SIZE: 12pt; FONT-FAMILY: arial,helvetica,sans-serif"><br>
<div style="FONT-SIZE: 12pt; FONT-FAMILY: times new roman,new york,times,serif"><font face="Tahoma" size="2">
<hr size="1">
<b><span style="FONT-WEIGHT: bold">From:</span></b> Hans Frederickson <<a href="mailto:hans@fredelectric.com" target="_blank">hans@fredelectric.com</a>><br><b><span style="FONT-WEIGHT: bold">To:</span></b> RE-wrenches <<a href="mailto:re-wrenches@lists.re-wrenches.org" target="_blank">re-wrenches@lists.re-wrenches.org</a>><br>
<b><span style="FONT-WEIGHT: bold">Sent:</span></b> Thu, March 31, 2011 8:15:19 AM<br><b><span style="FONT-WEIGHT: bold">Subject:</span></b> Re: [RE-wrenches] Expansion joints<br></font><br>
<div dir="ltr" align="left"><span><font face="Arial" color="#0000ff" size="2">We used an OZ-Gedney expansion coupling for 1-1/4" EMT on a recent job. The part # is TX-125 for 1-1/4", and it would be TX-150 for 1-1/2". It is the same as the OZ-Gedney AX expansion coupling for rigid conduit, but uses a rigid nipple and EMT connectors to adapt to EMT. The assembly is UL listed.</font></span></div>
<div dir="ltr" align="left"><span><font face="Arial" color="#0000ff" size="2"></font></span> </div>
<div dir="ltr" align="left"><span><font face="Arial" color="#0000ff" size="2">-Hans</font></span></div>
<div dir="ltr" align="left"><span><font face="Arial" color="#0000ff" size="2"></font></span> </div><font face="Arial" color="#0000ff" size="2"></font><font face="Arial" color="#0000ff" size="2"></font><font face="Arial" color="#0000ff" size="2"></font><font face="Arial" color="#0000ff" size="2"></font><font face="Arial" color="#0000ff" size="2"></font><br>
<div lang="en-us" dir="ltr" align="left">
<hr>
<font face="Tahoma" size="2"><b>From:</b> <a href="mailto:re-wrenches-bounces@lists.re-wrenches.org" target="_blank">re-wrenches-bounces@lists.re-wrenches.org</a> [mailto:<a href="mailto:re-wrenches-bounces@lists.re-wrenches.org" target="_blank">re-wrenches-bounces@lists.re-wrenches.org</a>] <b>On Behalf Of </b>Erika Weliczko<br>
<b>Sent:</b> Wednesday, March 30, 2011 5:54 PM<br><b>To:</b> 'RE-wrenches'<br><b>Subject:</b> Re: [RE-wrenches] Expansion joints<br></font><br></div>
<div></div>
<div>
<p class="MsoNormal"><span style="FONT-SIZE: 11pt; COLOR: rgb(31,73,125)">I recently used a Hubbell Killark product for rigid/IMC and was <b><i>not</i></b> happy with how the threads of the coupling engaged in factory conduit threads.</span></p>
<div><span style="FONT-SIZE: 11pt; COLOR: rgb(31,73,125)"> </span><br></div>
<p class="MsoNormal"><span style="FONT-SIZE: 11pt; COLOR: rgb(31,73,125)">Crousehinds XJG-EMT series is intended for EMT. And is described as being used indoors or outdoors. The EMT couplings mostly seem to be compression.</span></p>
<div><span style="FONT-SIZE: 11pt; COLOR: rgb(31,73,125)"> </span><br></div>
<div><span style="FONT-SIZE: 11pt; COLOR: rgb(31,73,125)"> </span><br></div>
<div>
<p class="MsoNormal"><span style="FONT-SIZE: 10pt; COLOR: rgb(31,73,125)">REpower SOLUTIONS</span></p>
<p class="MsoNormal"><span style="FONT-SIZE: 10pt; COLOR: rgb(31,73,125)"><a href="http://www.repowersolutions.com/" target="_blank"></a><a href="http://www.repowersolutions.com/" target="_blank">www.repowersolutions.com</a></span></p>
<p class="MsoNormal"><span style="FONT-SIZE: 10pt; COLOR: rgb(31,73,125)">P: <a href="tel:216.268.2275" target="_blank" value="+12162682275">216.268.2275</a></span></p>
<p class="MsoNormal"><span style="FONT-SIZE: 10pt; COLOR: rgb(31,73,125)">C: <a href="tel:216.402.4458" target="_blank" value="+12164024458">216.402.4458</a></span></p></div>
<div><span style="FONT-SIZE: 11pt; COLOR: rgb(31,73,125)"> </span><br></div>
<div>
<div style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: rgb(181,196,223) 1pt solid; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 3pt; BORDER-BOTTOM: medium none">
<p class="MsoNormal"><b><span style="FONT-SIZE: 10pt">From:</span></b><span style="FONT-SIZE: 10pt"> <a href="mailto:re-wrenches-bounces@lists.re-wrenches.org" target="_blank">re-wrenches-bounces@lists.re-wrenches.org</a> [mailto:<a href="mailto:re-wrenches-bounces@lists.re-wrenches.org" target="_blank">re-wrenches-bounces@lists.re-wrenches.org</a>] <b>On Behalf Of </b>Jamie Johnson<br>
<b>Sent:</b> Tuesday, March 29, 2011 2:33 PM<br><b>To:</b> RE-wrenches<br><b>Subject:</b> [SPAM] Re: [RE-wrenches] Expansion joints</span></p></div></div>
<div> <br></div>
<div>
<p class="MsoNormal"><span style="FONT-SIZE: 10pt; COLOR: black">Peter,</span></p></div>
<div>
<div><span style="FONT-SIZE: 10pt; COLOR: black"> </span><br></div></div>
<div>
<p class="MsoNormal"><span style="FONT-SIZE: 10pt; COLOR: black">Cooper makes one for 1.5" emt, not sure if it is rated for wet locations or not.</span></p></div>
<div>
<div><span style="FONT-SIZE: 10pt; COLOR: black"> </span><br></div></div>
<div>
<p class="MsoNormal"><span style="FONT-SIZE: 10pt; COLOR: black">part #XJG54 EMT, it allows for up to 4" max of conduit movement.</span></p></div>
<div>
<div><span style="FONT-SIZE: 10pt; COLOR: black"> </span><br></div></div>
<div>
<p class="MsoNormal"><span style="FONT-SIZE: 8pt; COLOR: black">Jamie Johnson</span><span style="FONT-SIZE: 10pt; COLOR: black"></span></p></div>
<div>
<p class="MsoNormal"><span style="FONT-SIZE: 8pt; COLOR: black">NABCEP Certified PV Technical Sales Professional</span><span style="FONT-SIZE: 10pt; COLOR: black"></span></p></div>
<div>
<p class="MsoNormal"><span style="FONT-SIZE: 8pt; COLOR: black">NABCEP Certified Solar PV Installer</span><span style="FONT-SIZE: 10pt; COLOR: black"></span></p></div>
<div>
<div><span style="FONT-SIZE: 10pt; COLOR: black"> </span><br></div></div>
<div>
<p class="MsoNormal"><span style="FONT-SIZE: 8pt; COLOR: black">General Manager</span><span style="FONT-SIZE: 10pt; COLOR: black"></span></p></div>
<div>
<p class="MsoNormal"><span style="FONT-SIZE: 8pt; COLOR: black">SOLAR POWER ELECTRIC<br><br></span><span style="FONT-SIZE: 10pt; COLOR: black"></span></p></div>
<div>
<div><span style="FONT-SIZE: 10pt; COLOR: black"> </span><br></div></div>
<div>
<p class="MsoNormal"><b><span style="FONT-SIZE: 8pt; COLOR: blue"><img height="210" width="226"></span></b><span style="FONT-SIZE: 10pt; COLOR: black"></span></p></div>
<div>
<div><span style="FONT-SIZE: 10pt; COLOR: black"> </span><br></div></div>
<div>
<div><span style="FONT-SIZE: 10pt; COLOR: black"> </span><br></div></div>
<blockquote style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; MARGIN-TOP: 5pt; PADDING-LEFT: 6pt; MARGIN-BOTTOM: 5pt; PADDING-BOTTOM: 0in; MARGIN-LEFT: 6pt; BORDER-LEFT: 1.5pt solid; PADDING-TOP: 0in; BORDER-BOTTOM: medium none">
<div>
<p class="MsoNormal" style="MARGIN-BOTTOM: 12pt"><span style="FONT-SIZE: 10pt; COLOR: black">-------- Original Message --------<br>Subject: [RE-wrenches] Expansion joints<br>From: "Peter Parrish" <<a href="http://peter.parrish@calsolareng.com%3e/" target="_blank" rel="nofollow"></a><a href="mailto:peter.parrish@calsolareng.com" target="_blank">peter.parrish@calsolareng.com</a>>;<br>
Date: Tue, March 29, 2011 1:04 pm<br>To: "'RE-wrenches'" <<a href="mailto:re-wrenches@lists.re-wrenches.org" target="_blank" rel="nofollow"></a><a href="mailto:re-wrenches@lists.re-wrenches.org" target="_blank">re-wrenches@lists.re-wrenches.org</a>><br>
<br>Does anyone have information (manu and part number) for expansion joints for<br>1-1/2 EMT? I have also heard that many EJs are designed for rigid conduit<br>(RMC) and may not be directly applicable to EMT.<br><br>- Peter<br>
<br>Peter T. Parrish, Ph.D., President<br>California Solar Engineering, Inc.<br>820 Cynthia Ave., Los Angeles, CA 90065<br>CA Lic. 854779, NABCEP Cert. 031806-26<br><a href="http://peter.parrish@calsolareng.com/" target="_blank" rel="nofollow"></a><a href="mailto:peter.parrish@calsolareng.com" target="_blank">peter.parrish@calsolareng.com</a> <br>
Ph <a href="tel:323-258-8883" target="_blank" value="+13232588883">323-258-8883</a>, Mobile <a href="tel:323-839-6108" target="_blank" value="+13238396108">323-839-6108</a>, Fax <a href="tel:323-258-8885" target="_blank" value="+13232588885">323-258-8885</a><br>
<br>_______________________________________________<br>List sponsored by Home Power magazine<br><br>List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank" rel="nofollow"></a><a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br>
<br>Options & settings:<br><span><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank"></a><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a></span><br>
<br><span>List-Archive: <a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank"></a><a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a></span><br>
<br>List rules & etiquette:<br><a href="http://www.re-wrenches.org/etiquette.htm" target="_blank" rel="nofollow"></a><a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>Check out participant bios:<br><a href="http://www.members.re-wrenches.org/" target="_blank" rel="nofollow"></a><a href="http://www.members.re-wrenches.org/" target="_blank">www.members.re-wrenches.org</a></span></p>
</div>
</blockquote></div></div></div></div></div></blockquote>
<blockquote type="cite">
<div><span>_______________________________________________</span><br><span>List sponsored by Home Power magazine</span><br><span></span><br><span>List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank"></a><a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a></span><br>
<span></span><br><span>Options & settings:</span><br><span><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a></span><br>
<span></span><br><span>List-Archive: <a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank"></a><a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a></span><br>
<span></span><br><span>List rules & etiquette:</span><br><span><a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a></span><br><span></span><br><span>Check out participant bios:</span><br>
<span><a href="http://www.members.re-wrenches.org/" target="_blank">www.members.re-wrenches.org</a></span><br><span></span><br></div></blockquote></div>_______________________________________________<br>List sponsored by Home Power magazine<br>
<br>List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><br><br>Options & settings:<br><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>List-Archive: <a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br><br>List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>Check out participant bios:<br><a href="http://www.members.re-wrenches.org/" target="_blank">www.members.re-wrenches.org</a><br><br></blockquote></div><br></div></div></div></div><br>_______________________________________________<br>
List sponsored by Home Power magazine<br><br>List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br><br>Options & settings:<br><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>List-Archive: <a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br><br>List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>Check out participant bios:<br><a href="http://www.members.re-wrenches.org/" target="_blank">www.members.re-wrenches.org</a><br><br><br></blockquote></div><br>