<p>Mick,<br>
Direct Power did this some years ago on a piece of Interstate roadside art. I think it worked quite well to discourage theft. You might want to call DP&W for info; I'd talk with Jeff.</p>
<p>Allan at Positive Energy <br></p>
<div class="gmail_quote">On Mar 4, 2011 12:22 PM, "Mick Abraham" <<a href="mailto:mick@abrahamsolar.com">mick@abrahamsolar.com</a>> wrote:<br type="attribution">> Hello, we mounted some PV onesy modules as high as we could reach without a<br>
> man-lift, but an enterprising thief could reach just as high. The "side of<br>> pole" mounts hold the bolt heads captive so I bought some aluminum<br>> "breakaway" nuts. However the nuts have a big diameter which would not fit<br>
> inside the Kyocera PV frames.<br>> <br>> Has anyone tried spot welding the PV frames direct to the aluminum rails to<br>> which they are mounted? Would this over stress the glass laminate or cause<br>> other problems? I realize this would void the Kyo warranty but nothing voids<br>
> system performance like a stolen PV module.<br>> <br>> Happy Friday,<br>> <br>> Mick Abraham, Proprietor<br>> <a href="http://www.abrahamsolar.com">www.abrahamsolar.com</a><br>> <br>> Voice: 970-731-4675<br>
</div>