<p>Allan - Good point.  With that in mind I would revise my loss estimate upwards.   I would be very curious to hear from anyone with actual experience with this type of situation.<br></p>
<p>Andrew Truitt<br>
Truitt Renewable Energy Consulting<br>
202 486-7507<br>
<a href="http://www.linkedin.com/pub/andrew-truitt/8/622/713">http://www.linkedin.com/pub/andrew-truitt/8/622/713</a><br></p>
<p>Please excuse brevity and typos - this message was typed on tiny keys.</p>
<p>On Jan 15, 2011 11:02 PM, "Allan Sindelar" <<a href="mailto:allan@positiveenergysolar.com">allan@positiveenergysolar.com</a>> wrote:<br><br>

  
    
  
  <div bgcolor="#ffffff" text="#000000">
    A little more musing here...and I'm looking for others' opinions on
    this theoretical piece.<br>
    <br>
    If you have two unmatched strings, won't the string with the larger
    Imp define the MPP of the inverter? <br>
    <br>
    If so, I would expect that the weaker string would be forced to
    operate at the Imp of the stronger string.<br>
    <br>
    If the stronger string operates at a higher Vmp, it will pull the
    weaker string's operating voltage above its own MPP, which could
    pull the current down substantially as voltage moved from Vmp toward
    Voc.<br>
    <br>
    Conversely, if the stronger string operates at a lower Vmp, it will
    pull the weaker string's operating voltage back toward its own MPP,
    which would maintain approximately the same current at a slightly
    lower voltage. This would reduce output slightly, but not nearly as
    much as in the other direction.<br>
    <br>
    Does this make sense? And does real-world experience bear this out?<p><font color="#500050"><br><br>Allan Sindelar<br><a href="mailto:Allan@positiveenergysolar.com">Allan@positiveenergysolar.com</a><br>NABCEP Certified Photovoltaic Installer<br>
EE98J Journey...</font></p><blockquote type="cite"><p><font color="#500050"><br>><br>> Friends:<br>><br>> I have a client with a Xantrex GT2.8 inverter.  Feeding it are 8 Solar World SW175...</font></p><pre>
<fieldset></fieldset>
_______________________________________________
List sponsored by Home Power magazine

List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org" target="_blank">RE-wrenches@lists.re-wrenches.org</a><p><font color="#500050"><br>><br>> Options & settings:<br>> <a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
><br>> ...</font></p></pre>
    </blockquote>
  </div>

<br>_______________________________________________<br>
List sponsored by Home Power magazine<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Options & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out participant bios:<br>
<a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br></p>