<p>This was one of the limitations of the SW. If you want to have an EQ where the generator shuts off when its finished, you need to do a little trick. Setting the cursor to EQ just means the system will perform an EQ the next time the genny runs, and that might be some random time in the future. Setting the cursor to EQ and manually starting the genny works sort of, but somebody has to stay around and babysit the system to manually turn the genny off once the charge is done. Not ideal. </p>

<p>If you set the cursor to EQ and then temporarily adjust the two minute start voltage up to any voltage higher than actual current voltage, you'll get an auto-start. Since it was started under the inverter's command, it will turn off once the EQ is finished. </p>

<p>Once the genny's running reset the two minute start voltage back to original. </p>
<p>Phil Undercuffler<br>
</p>