<table cellspacing="0" cellpadding="0" border="0" ><tr><td valign="top" style="font: inherit;">Wire gauge isn't the only consideration.  Check all crimps and connections in the DC path.  A bad one can cause more drop than the wire.<br><br>Dan<br><br><br>--- On <b>Fri, 8/20/10, Jeff Oldham <i><starpower4u@juno.com></i></b> wrote:<br><blockquote style="border-left: 2px solid rgb(16, 16, 255); margin-left: 5px; padding-left: 5px;"><br>From: Jeff Oldham <starpower4u@juno.com><br>Subject: Re: [RE-wrenches] Voltage discrepancy<br>To: re-wrenches@lists.re-wrenches.org<br>Date: Friday, August 20, 2010, 3:43 PM<br><br><div class="plainMail">boB - it is 4' of #6 CU. and the charge rate averages 45A @ 12V nom. I understand that the Vd diff. from 13.6V @ 15A and 14.2V @45A is .1V but the meters when set nuts on at 14.2V are off by at least .3V @ 13.6V. This is not wire sizing issues nor does that explain the calibration drift over a few
 days.<br><br><br>From the Solar, Wind and Hydro powered office of Jeff Oldham/Regenerative SOLutions<br><br></div></blockquote></td></tr></table><br>