<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
Years ago, I used to get custom cases made by Silton Company. They are
now owned by <a href="http://www.olycase.com/">Olympic Case Company</a>
but the facility in Fresno is still in use.<br>
<br>
Kent Osterberg<br>
Blue Mountain Solar<br>
<br>
<br>
Peter Parrish wrote:
<blockquote cite="mid:53532C1555DD4059A92655D5FC91408F@Angeles"
type="cite">
<pre wrap="">I seem to remember reading about a source of "custom padded equipment
cases", but can't remember when and where I did so. What I am talking about
is a sturdy (e.g. Al) case with closed cell foam in the top and bottom
halves and then a third inner 2" or 3" layer of foam with cutouts for
sensitive equipment. I am thinking of our DayStar irradiance meter, our
SunEye, DMM, IR thermometer, clamp-on ammeter, digital camera and the like.
I am not interested in buying a "kit". I would like to specify the outlines
for each piece of equipment and have the cutouts done in a professional
manner.
Has anyone ordered one or know of a source?
- Peter
Peter T. Parrish, Ph.D., President
California Solar Engineering, Inc.
820 Cynthia Ave., Los Angeles, CA 90065
CA Lic. 854779, NABCEP Cert. 031806-26
<a class="moz-txt-link-abbreviated" href="mailto:peter.parrish@calsolareng.com">peter.parrish@calsolareng.com</a>
Ph 323-258-8883, Mobile 323-839-6108, Fax 323-258-8885
_______________________________________________
</pre>
<br>
</blockquote>
</body>
</html>