One of the "technical issues" which Nick may recall is not really a flaw in the controller but a narrow spec for the minimum DC input voltage. <br><br>I "went off" on the Wrench List a couple of years ago because I felt this aspect should be more prominently explained. My retrofit where the solar array was wired "24 volt nominal" could not engage the controller to charge a 24 volt battery. The modules were a bit aged and the original feed wires were undersized so there was too much voltage loss and the controller couldn't hook up.<br>

<br>That client did not want to pay me to rewire the array for a higher voltage...that's understandable since it's 30' in the air and would cost a bit of labor. Subbing a different brand MPPT controller averted the problem.<br>

<br>I still don't see a very prominent warning about this characteristic on the Apollo website. However, so long as the array is wired up for voltage higher than nominal (with proper gauge DC feed wires), this is a non-issue.<br>

<br>I'm speaking up to make sure there's no taint on Apollo as a result of the issue I had raised. They were cooperative and courteous as we worked through that. <br><br clear="all">Mick Abraham, Proprietor<br><a href="http://www.abrahamsolar.com">www.abrahamsolar.com</a><br>

<br>Voice: 970-731-4675<br>
<br><br><div class="gmail_quote">On Tue, Mar 16, 2010 at 6:14 PM, Nick Vida <span dir="ltr"><<a href="mailto:nickvida@ymail.com">nickvida@ymail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">

<div><div style=""><div>wondering if any wrenches have any opinions on the Apollo charge controllers T80 in particular.<br></div><div>I heard they had some technical issues not to long ago- is that resolved?</div><div><br>

</div><div>thanks,</div><div><br></div><div>nick</div>


</div><br>

      </div><br>_______________________________________________<br>
List sponsored by Home Power magazine<br>
<br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br>
<br>
Options & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>
List-Archive: <a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>
Check out participant bios:<br>
<a href="http://www.members.re-wrenches.org" target="_blank">www.members.re-wrenches.org</a><br>
<br>
<br></blockquote></div><br>