<div>Yes, we could do that.......however during instances of testing, trouble shooting, or in the event of a fire it can be helpful to have a wayto quikly disconnect the inverter from the combiner/fusing <u>at</u> the array.  In most standard electrical work having a disconnect located not in line of sight from location of work leads to lock out/ tag out procedures....I see no difference here.  It prevents one from having an inverter/disconnect from accidentally being turned on when you are working on the roof out of sight from a homeowner trying to help, or a co worker not paying attention.</div>

<div> </div>
<div>  
<div>Sunny Regards,</div>
<div>Kirpal</div></div>
<div> </div>
<div> </div>
<div>On Mon, Jan 11, 2010 at 5:39 PM, William Miller <<a href="mailto:william@millersolar.com">william@millersolar.com</a>> wrote:</div>
<div>> Kirpal:</div>
<div>></div>
<div>> Can't you disconnect the load at the inverter and then go back to the array</div>
<div>> to disconnect the feeder?</div>
<div>></div>
<div>> William</div>
<div>></div>
<div>> At 04:01 PM 1/11/2010, you wrote:</div>
<div>></div>
<div>> William.....we love the Outback FWPV12 and 8.......a good improvement</div>
<div>> over the PSPV......we use them high voltage apps, but alas......don't</div>
<div>> open fuse under load.....thats why we need a version which is</div>
<div>> disconnectable......</div>
<div>> Cheers,</div>
<div>></div>
<div>> --</div>
<div>> Sunny Regards,</div>
<div>> Kirpal Khalsa</div>
<div>> NABCEP Certified Solar PV Installer</div>
<div>> Renewable Energy Systems</div>
<div>> <a href="http://www.oregonsolarworks.com">www.oregonsolarworks.com</a></div>
<div>> 541-218-0201 m</div>
<div>> 541-592-3958 o</div>
<div>></div>
<div>></div>
<div>> On Mon, Jan 11, 2010 at 12:16 PM, William Miller</div>
<div>> <<a href="mailto:william@millersolar.com">william@millersolar.com</a>> wrote:</div>
<div>>> Kirpa:</div>
<div>>></div>
<div>>> Have you considered using the Outback PSPV combiner with the 600 VDC</div>
<div>>> touch-safe fuse holders and appropriate fuses?  I belive this</div>
<div>>> configuration</div>
<div>>> meets the 600 VDC rating.</div>
<div>>></div>
<div>>> William Miller</div>
<div>>></div>
<div>>></div>
<div>>></div>
<div>></div>
<div>> _______________________________________________</div>
<div>> List sponsored by Home Power magazine</div>
<div>></div>
<div>> List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a></div>
<div>></div>
<div>> Options & settings:</div>
<div>> <a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a></div>
<div>></div>
<div>> List-Archive:</div>
<div>> <a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a></div>
<div>></div>
<div>> List rules & etiquette:</div>
<div>> <a href="http://www.re-wrenches.org/etiquette.htm">www.re-wrenches.org/etiquette.htm</a></div>
<div>></div>
<div>> Check out participant bios:</div>
<div>> <a href="http://www.members.re-wrenches.org">www.members.re-wrenches.org</a></div>
<div>></div>
<div>></div>
<div>></div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>