<font face="arial" size="4">So you can get others to install your designs? I would never touch materials I do not sell, or install a system I did not design... and I am amazed anyone would.<br><br>Todd<br><br><br><br>On Monday, December 21, 2009 12:56pm, "Brian White" <brianw@eagleroofing.com> said:<br><br>> Thanks to all who have posted.<br>> <br>> To answer a couple of questions that have been posted.<br>> <br>> Eagle Roofing does not have a contractor's license, as we do not perform the<br>> installation. We work with electrical contractors and roofing contractors in the<br>> area of a given project. Our services do include the design and documentation of<br>> the system, and "help" our partners pull the permit.<br>> <br>> We have tried several of the approaches mentioned here, i.e. the system consist of<br>> certified products, and why do we have to re-test certified products, etc.<br>> However, this plan checker seems very firm on their position. Pressing further, we<br>> asked them to provide the criteria for the test they are requesting, and amazingly<br>> enough they could not produce any. They also said that just a wet stamp of the<br>> plans would not suffice.<br>> <br>> We have completed previous installations in this local within the last year and<br>> were not faced with this requirement, even though it was originally adopted in<br>> 2007.<br>> <br>> The following is a verbal description of what they want done;<br>> <br>> He said that a registered electrical engineer has to be onsite when the<br>> installation of this system is completed.  This engineer has to test the power<br>> (wattage) and load (amps) to make sure that the output is within the parameters of<br>> which this system is design for, and finally this person has to write a report<br>> with his PE stamp to certify that this system is working properly.<br>> <br>> We did get as far as to get him to agree that it did not seem relevant, as he said<br>> he was going to look into the ordinance a little further and might make some<br>> revisions to it.  However, for now, he won't budge on this ordinance because it's<br>> been in the city code before he came on board.<br>> <br>> Also, some additional system information. 3 strings of 38 PV Tiles (Suntech 50<br>> Watt BIPV Roof Tile) with one PV Powered 4800 Watt inverter in a grid tied set up.<br>> Not exactly a complex system.<br>> <br>> I will provide additional updates as I get them.<br>> <br>> Thanks again,<br>> Brian C. White<br>> Design Engineer - PV Systems<br>> <br>> Eagle Roofing Products<br>> 120 North Auburn Street - Suite 212<br>> Grass Valley, CA  95945<br>> Phone: 530-273-2948<br>> Cell: 530-575-5550<br>> e-mail: brianw@eagleroofing.com <mailto:brianw@eagleroofing.com><br>> <br>> <br>> <br>> ________________________________<br>> <br>> From: re-wrenches-bounces@lists.re-wrenches.org on behalf of William Miller<br>> Sent: Fri 12/18/2009 3:05 PM<br>> To: RE-wrenches<br>> Subject: Re: [RE-wrenches] Solar System Certification<br>> <br>> <br>> Brian:<br>> <br>> I looked up the Municipal Codes<br>> (http://www.ci.yorba-linda.ca.us/~ci26/how-do-i/get/get-city-codes) and this<br>> requirement is right in there.  I hope you have a provision in your contract that<br>> allows for additional billing for unanticipated engineering fees.  Everyone<br>> should.  If you need language, contact me off line.<br>> <br>> Fortunately I have never experienced anything like this.  This requirement sounds<br>> unreasonable.  It is sort of like asking an air conditioning contractor to have<br>> the air conditioning unit tested in the field.  Individual solar components are<br>> listed.  The combining of the components is facilitated by the manufacturers<br>> specifications and on-line sizing tools. Having said that, an amateur can easily<br>> screw the design and installation of even the most simple grid-tie system.  This<br>> provision is the ultimate consumer protection.  It sounds onerous at first but<br>> does have a benefit.<br>> <br>> Good luck, and give us a hint how much this certification costs.<br>> <br>> William Miller<br>> <br>> <br>> <br>> <br>> At 01:31 PM 12/18/2009, you wrote:<br>> <br>> <br>>       I am curious if any of you have had to deal with this issue before.<br>> <br>>        The following is an item we got back from the City of Yorba Linda for a Plan<br>> Check correction:<br>> <br>> <br>>         All electrical solar systems shall be tested and approved by a California<br>> Registered Electrical Engineer.  The engineer shall furnish a report stating<br>> their name, registration number, its date of expiration, address where the<br>> testing occurred and the dates of testing and approval.  Such report shall be<br>> presented to the City inspector for approval at the time of final inspection. <br>> (YLMC 15.28.020)  Note on the plans.<br>> <br>>         All experiences and suggestion are appreciated.<br>> <br>> <br>> <br>>      Best Regards,<br>>     Brian C. White<br>>    Design Engineer - PV Systems<br>> <br>>       Eagle Roofing Products<br>>    120 North Auburn Street - Suite 212<br>>       Grass Valley, CA  95945<br>>   Phone: 530-273-2948<br>>       Cell: 530-575-5550<br>>        e-mail: brianw@eagleroofing.com <mailto:brianw@eagleroofing.com><br>> <br>>     _______________________________________________<br>>   List sponsored by Home Power magazine<br>> <br>>      List Address: RE-wrenches@lists.re-wrenches.org<br>> <br>>    Options & settings:<br>>   http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org<br>> <br>>       List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org<br>> <br>>   List rules & etiquette:<br>>       www.re-wrenches.org/etiquette.htm<br>> <br>>  Check out participant bios:<br>>       www.members.re-wrenches.org <http://www.members.re-wrenches.org/><br>> <br>> <br>>     No virus found in this incoming message.<br>>  Checked by AVG - www.avg.com <http://www.avg.com/><br>>  Version: 9.0.717 / Virus Database: 270.14.113/2573 - Release Date: 12/17/09<br>> 23:35:00<br>> <br>> Please note new e-mail address and domain:<br>> <br>> William Miller<br>> Miller Solar<br>> Voice :805-438-5600<br>> email: william@millersolar.com<br>> http://millersolar.com<br>> <http://millersolar.com/> License No. C-10-773985<br>> <br>> <br>> _______________________________________________<br>> List sponsored by Home Power magazine<br>> <br>> List Address: RE-wrenches@lists.re-wrenches.org<br>> <br>> Options & settings:<br>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org<br>> <br>> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org<br>> <br>> List rules & etiquette:<br>> www.re-wrenches.org/etiquette.htm<br>> <br>> Check out participant bios:<br>> www.members.re-wrenches.org<br>> <br>> <br></font>