<html>
<body>
I'm also concerned about the issues brought up here. I have two
possible projects that would benefit from Enphase due to the fact that
the modules will go on more than one roof, with significantly different
orientations. In one case, there are shading issues as
well.<br><br>
Supposedly the Enphase units are selling fast. Someone must be
installing them. They have been out long enough that there must be
some data as to whether or not the units are surviving. The long
term will not be known until the inverters have been out for many years,
however if they are having issues in the short term, then we know they
have issues. <br><br>
One idea that Enphase tech support said was acceptable was to mount the
inverters in accessible groups. The DC leads would need to be
extended, and some loss would occur. Also the inverters can be
mounted in vented attics. Having the inverters in a group in an
accessible attic would make maintenance easier than tearing apart an
array to get to a dead inverter. <br><br>
<br>
At 02:00 PM 11/7/2009, you wrote:<br><br>
<blockquote type=cite class=cite cite=""><pre>I put a temperature probe
under the modules almost every job, and it is always
drastically lower than the module itself. A frying module at 130 might
have an
ambient temperature underneath in its shade of 89 degrees. the specifics
are
always surprisingly low relative to touching the panel and how your face
feels
up there.
Nick
Can anyone think of a more brutal environment for a piece of electronic
equipment than under a solar module which day in and day out experiences
the
elements and temperatures of 130+ plus F?
Despite any so-called accelerated life-cycle testing and estimated mean
time
to failure probabilities, nothing takes the place of actual time cooking
under solar arrays.
Having seen my fair
share of controller and inverter manufacturers come and
go out of business in 30+ years in the RE field, I'll be watching with
great
interest the great Enphase experiment unfold.
And ever heard of the word "recall"? Swapping a central
inverter or two is
one thing. Imagine doing it with the X number of microinverters
you
installed six months or two years ago...
But hey, other than my Eeyore-sounding words above, aren't Enphase
inverters
so cool with all that they can do?
marco in Hawaii
A while back there was a discussion about the reliability of Enphase
inverters. As I understand, they have been selling like hot cakes,
so a lot
must be installed. Some sort of track record must be emerging.
Has the promised reliability of these inverters been met? Can they
be
connected to a rail, under a large array without worry that the unit
will
need to be dug out
and replaced? Should the inverters be located in an
attic or other accessible location.
Thanks,
Drake Chamberlin
Athens Electric
OH License 44810
CO License 3773
NABCEP TM Certified PV Installer
Office - 740-448-7328
Mobile - 740-856-9648
No virus found in this incoming message.
Checked by AVG - <a href="http://www.avg.com">www.avg.com</a>
Version: 8.5.425 / Virus Database: 270.14.52/2485 - Release Date:
11/06/09
19:39:00
</pre><font face="Courier New, Courier"></font><br>
_______________________________________________<br>
List sponsored by Home Power magazine<br><br>
List Address: RE-wrenches@lists.re-wrenches.org<br><br>
Options & settings:<br>
<a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" eudora="autourl">
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a>
<br><br>
List-Archive:
<a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" eudora="autourl">
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br>
<br>
List rules & etiquette:<br>
<a href="http://www.re-wrenches.org/etiquette.htm" eudora="autourl">
www.re-wrenches.org/etiquette.htm</a><br><br>
Check out participant bios:<br>
<a href="http://www.members.re-wrenches.org/" eudora="autourl">
www.members.re-wrenches.org</a></blockquote>
<x-sigsep><p></x-sigsep>
<font color="#0000FF">Drake Chamberlin<br>
Athens Electric<br>
OH License 44810<br>
CO License 3773<br>
NABCEP </font><font size=1 color="#0000FF">TM
</font><font color="#0000FF">Certified PV Installer <br>
Office - 740-448-7328<br>
Mobile - 740-856-9648 </font></body>
</html>