<div>I have adapted 2 SW's to an e panel and had to deal with an inside corner in the process We also had to deal with the original conduit locations. It did make for some interesting plumbing.</div>
<div>Works well, it also had 2 FM-60 controllers and some other gear in the mix.</div>
<div>The e panel used with the notagutter is the narrow one, use the wider one and it works well.</div>
<div> </div>
<div>Bob</div>
<div> </div>
<div><br><br> </div>
<div class="gmail_quote">On Fri, Oct 23, 2009 at 4:03 AM, William Miller <span dir="ltr"><<a href="mailto:william@millersolar.com">william@millersolar.com</a>></span> wrote:<br>
<blockquote style="BORDER-LEFT: #ccc 1px solid; MARGIN: 0px 0px 0px 0.8ex; PADDING-LEFT: 1ex" class="gmail_quote">
<div>Friends:<br><br>I have grown fond of the Outback cabinets and hardware. We have found a tremendous amount of flexibility in these enclosures. We have had to learn as we progressed, for example:<br><br>We have mounted lots of SW inverters in the green and silver assemblies. We had to learn how to adapt them to the silver equipment.<br>
<br>We have stacked 8 FX inverters in two cabinets with custom bus and bypass design, we have installed three way bypass assemblies of our own design, we have put X240 transformers internally and externally. The boxes have the internal capacity and breaker mounting space to allow maximum capabilities. We have developed drawing templates that allow us to layout out a job before we receive the parts. We have developed custom bussing to minimize the wire runs. Most of all, we have become adept at installing wiring and making it look pretty. We use lacing strips internally to keep wiring straight and in minimal cross-section.<br>
<br>I have never used the "Not-a-gutter" product, but we've taken out some E-Panels. I am sure they are thoughtfully designed, but they do make me feel claustrophobic. I don't imagine one can adapt any of the Midnite equipment for use with the SW inverters. Correct me if I am wrong.<br>
<br>We have also gained a lot of experience with the XW PDP. They are too small and lack adequate breaker capacity. We have to install outboard load centers if we install three XW inverters.<br><br>See our web site for photos of lots of installs with Outback gear. I remember when all Outback had was BOS! I hope the BOS is available for years to come.<br>
<br>William Miller<br>
<p><font size="3"><u>Please note new e-mail address and domain:<br><br></u>William Miller <br>Miller Solar<br>Voice :805-438-5600 Fax: 805-438-4607 <br>email: <a href="mailto:william@millersolar.com" target="_blank">william@millersolar.com</a><br>
<a href="http://millersolar.com/" target="_blank">http://millersolar.com<br></a>License No. C-10-773985<br></font></p></div><br>_______________________________________________<br>List sponsored by Home Power magazine<br><br>
List Address: <a href="mailto:RE-wrenches@lists.re-wrenches.org">RE-wrenches@lists.re-wrenches.org</a><br><br>Options & settings:<br><a href="http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org</a><br>
<br>List-Archive: <a href="http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org" target="_blank">http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org</a><br><br>List rules & etiquette:<br><a href="http://www.re-wrenches.org/etiquette.htm" target="_blank">www.re-wrenches.org/etiquette.htm</a><br>
<br>Check out participant bios:<br><a href="http://www.members.re-wrenches.org/" target="_blank">www.members.re-wrenches.org</a><br><br><br></blockquote></div><br>