We definitely deal with snow issues here in Crested Butte Co. We prefer
pole mounts when possible, and our winter tilt (55 degrees) sheds snow
adequately.  If not during the storm cycle, it easily sheds with first
sun on the array.  Our continental snowpack is drier, and tends to
stick less than your way, so that would also be a consideration.<br>
<br>
The only problem we have seen on roof mounts is where the snow didn't
crush the module, but the torque of the entire "glacier" of snow trapping the array while it was
creeping down the roof pulled module clamps, and destroyed a couple of
modules.   The roof (see attached) was 12/12, but it was a seasonal (summer only)
cabin at 11,000'.  Nobody was around all winter. The solution is maintenance/snow removal.  If the clients aren't around to need the power like these, just cutting the snow so the array isn't the only anchor of the slab of snow on the roof is the fix, otherwise roof shoveling all winter.  We use a more robust rail (DP and W has done us right), and err with more feet supporting the racking.  This drives up costs a bit, but we sleep better.... <br>


<br>Jay Pozner<br>Nunatak Alternative Energy Solutions<br>Crested Butte, CO<br>(970)349-3432<br><div class="gmail_quote">---------- Forwarded message ----------<br>From: <b class="gmail_sendername">Nunatak Alternative Energy Solutions</b> <span dir="ltr"><<a href="mailto:nunatakenergy@gmail.com" target="_blank">nunatakenergy@gmail.com</a>></span><br>


Date: Wed, Jul 29, 2009 at 8:37 AM<br>Subject: luig<br>To: <a href="mailto:zzyyzzx11@gmail.com" target="_blank">zzyyzzx11@gmail.com</a><br><br><br><font color="#888888"><br clear="all"><br>-- <br>Nunatak Alternative Energy Solutions<br>

Jay Pozner and Lena Wilensky<br>
(970)349-3432<br><a href="http://www.nunatakenergy.com" target="_blank">www.nunatakenergy.com</a><br>
</font></div><br>