<font face="arial" size="4"><h3>http://www.nasa.gov/centers/glenn/about/fs06grc.html<br></h3><h3><br></h3><h3>Plasma Contactor</h3>

<p>The Space Station arrays operate at 160 volts dc. When the arrays
are producing power, the station structure will also tend to float to a
voltage close to the array voltage. Under these conditions, the Space
Station could be subjected to problems like arcing from its surface to
the surrounding environment. To avoid these problems, the structure has
been "grounded" with a plasma contactor.</p>

<!-- start figure 4-->
<img alt="Figure 4: Plasma contactor that will protect the structure of the Space Station" title="Figure 4: Plasma contactor that will protect the structure of the Space Station" src="http://www.nasa.gov/centers/glenn/images/content/83587main_plasmact.jpg" width="175" align="right" border="0" height="180" hspace="8">

<span class="detailImageDesc">Image right:  Plasma contactor that will protect the structure of the Space Station  Credit:  NASA</span><br>

<!-- end figure 4-->
<p>The plasma contactor unit acts as an electrical ground rod to
connect the Space Station structure to the local environment and
harmlessly dissipate the structure charges. NASA Glenn engineers
designed, manufactured and tested the hollow cathode assembly, which is
the critical component of the plasma contactor unit. The hollow cathode
assembly performs this function by converting a small supply of gas
into ions and electrons and discharging this stream to space. The
stream carries with it the excess electrons that created the surface
charge.</p><br><br>On Friday, July 24, 2009 2:15pm, "Kurt Albershardt" <info@es-ee.com> said:<br><br>


  <meta content="text/html; charset=UTF-8" http-equiv="Content-Type">

Check out Nott Ltd. <a class="moz-txt-link-freetext" href="http://www.nottltd.com/lightning.html">http://www.nottltd.com/lightning.html</a><br>
<br>
I know a couple of RF engineers who swear by these and will not setup a
tower without them.  We are looking at putting small ones on each end
of every row on a large array next year.<br>
<br>
<br>
<br>
<br>
<br>
On 7/22/09 13:57 , <a class="moz-txt-link-abbreviated" href="mailto:toddcory@finestplanet.com">toddcory@finestplanet.com</a> wrote:
<blockquote cite="mid:1248292657.70473044@192.168.1.71" type="cite"><font size="4" face="arial">NASA had a similar problem on the space station.
They used (I think - research this) some kind of static discharge unit
on the exterior of the station.<br>
  <br>
Todd<br>
  <br>
  <br>
  <br>
On Wednesday, July 22, 2009 6:13am, "jason pozner"
<a class="moz-txt-link-rfc2396E" href="mailto:zzyyzzx11@gmail.com"><zzyyzzx11@gmail.com></a> said:<br>
  <br>
  <br>
  <br>
  <div class="gmail_quote">
  <div class="gmail_quote"><br>
Hey all,<br>
  <br>
I am trying to figure out how to mitigate problems found with a 12v
500w simple DC system without a ground.  This system is at 14,500' on
Denali (Mt McKinly).  We experienced a somewhat "festive" fireworks
display on the 4th of July as static current from a storm seemed to
travel through one of the antennae, and energized some radio equipment.
 There is no grounded conductor, as there is no grounding electrode, as
there is no ground to put it in.  The camp is situated on about 500' of
glacial ice.  The conductivity of the ice is questionable, and to make
the puzzle a bit more fun the camp is raised and taken down at the
beginning and end of every climbing season (Apr-July), though the site
is the same.  The loads are primarily for communications for search and
rescue purposes, and  reliability, and simplicity are paramount.  I
have been exploring the avenue of a surge arrestorsThanks, and was
wondering if any of you could make a recommendation on a product that
can either be reset or cheap enough to have a few replacements on hand.
 Everything is flown in or carried to the site, and repair/replacement
needs to be simple enough so non-technical minded personnel can perform
and re-set the system.<br>
  <br>
Thanks,<br>
  <br>
Jay Pozner<br>
Nunatak Alternative Energy Solutions<br>
Crested Butte, CO<br>
(970) 349-3432<br>
  <a moz-do-not-send="true" href="mailto:nunatakenergy@gmail.com" target="_blank">nunatakenergy@gmail.com</a><br>
  </div>
  </div>
  </font></blockquote>
<br>
</font>